The XLR Female to 1/4" TRS Male Adapter from Kopul is a passive barrel adapter that accepts a 3-pin XLR input and outputs the signal via a 1/4" TRS male connector.

The adapter maintains the balanced nature of the signal and is useful for line level signals requiring connector changes. The adapter is 0.79" in diameter.

Nickel-Plated Connections    Rugged Metal Construction    Diameter: 0.79"

Related Questions and Answers

Q: 1. Does this work with the DJI Wireless mic system?

A: Yes, the Kopul A-XMMF 3.5mm TRS Female to XLR Male Adapter could be used with the DJI Mic wireless system as long as the receiver's output is set to mono.

Q: 2. Can I connect an RX from the Rode Wireless Go II to a mixer, using the RODE SC11 and 2 RODE VXLRs, so I can have a microphone on each channel?

A: You can use the Rode SC11 Right-Angle 3.5mm TRS Y-Splitter Cable and two Rode VXLR 3.5mm TRS Female to XLR Male Adapters to connect the output from the Rode Wireless GO II Receiver to the inputs on a mixer. As another option, you can use a 3.5mm TRS male to dual XLR male Y-cable like the Cable Techniques 3.5mm Right-Angle TRS to Dual Low-Profile 3-Pin XLR Male Y Cable - 15" B&H # CATGO2YX3M15), the Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y), or the Azden MX-2 - Y Cable for 200UPR & 320UPR with 1/8" (3.5mm) Mini to Dual XLR Connection (B&H # AZMX2).

Q: 3. Can I use this to connect a Rode VideoMic Pro to a Tascam DR-40

A: Yes, you can use this to adapt the 3.5mm output from the mic to the XLR input on the Tascam.

Q: 4. Will this work to connect a Sennheiser G4 lav mic to the XLR input of the FX6?

A: The Kopul A-XMMF 3.5mm TRS Female to XLR Male Adapter (B&H# KOAXMMF) could be used to connect the XLR inputs of the Sony FX6 Full-Frame Cinema Camera (Body Only) (B&H# SOFX6) to a 3.5mm male lead coming from a microphone level input such as that coming from the receiver of the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System (A: 516 to 558 MHz) (B&H # SEEW112PG4A) if it is connected with a male to male 3.5mm TRS cable.

Q: 5. Does this adapter convert 48v phantom power down to 5v?

A: This allows you to connect a mic equipped with a 3.5mm TRS connector to an XLR input. The mics you would be using will need to have their own power supply, it will not allow them to be powered through Phantom Power.

Q: 6. I have a Tascam DR40 and a AudioTechnica 3350 Lavallier mic. Is this going to work ?

A: This is the type of converter that is used for connecting mics with a 1/8 /3.5mm TRS plug into a device with a XLR plug. In other words, yes, it will work.

Q: 7. Is the mini socket stereo? That is; will it take a stereo signal from, say, a laptop, and covert it to mono?

A: Yes, and it works great for playing stereo from my laptop speaker output into a mono microphone input on my mixer so I can EQ it, after I also add a 20 or 40 dB pad between this adapter and my mixer. I have this adapter and according to the schematic diagram on the rear of the package, at the 3.5mm mini female jack, the Tip and Ring are connected together and go to pin 2 of the XLR male. The 3.5mm jack Sleeve connects to pin 1 and 3 of the XLR male.

Q: 8. Will this work to get a Sennheiser lav ew 122 or ME 2-II wired?

A: No, the adapter you need is the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). This adapter will convert the 3.5mm plug to XLR and also allow converts phantom power (typically 48V) from a mixer or recorder to plug-in power (approximately 3 to 5V) which the lav mic needs to operate. The Kopul adapter only converts the plug to XLR but will not convert phantom power to plug-in power.

Q: 9. Will this adapter work from the rodelink wireless to Sony FS5 XLR?

A: While I do not own the FS5, the audio inputs on your camera are XLR at mic and line level. The Rode Link outputs to 1/8 jack and will connect to your camera via this adapter perfectly using the supplied (Rode) 1/8 short cable.

Q: 10. Would this adapter enable me to attach a Synco shotgun mic to a Sony A6700 and record from the Synco straight into the camera?

A: The Movo Photo TCB6 XLR 3-Pin Female to 3.5mm TRS Male Adapter Cable (16") will work with microphones which do not require phantom power. If your microphone requires phantom power, you cannot use an adapter cable to connect it to a camera's 3.5mm microphone input jack.