Elevate your lighting system with the American DJ Vizi Beam RX2, a compact moving head beam fixture that's designed for live events and venues looking for a small footprint lighting fixture that creates high-impact lightshows. The fixture is powered by a 100W Osram Sirius HRI discharge lamp and delivers stunning visuals with a precise 2° beam angle and high-speed 3-phase pan/tilt motors for maximum performance. 

Unlock a wealth of features, including onboard wireless DMX, two prism wheels (16-facet circular & 4-facet linear), a frost effect, motorized focus (with 16-bit fine focus), along with a 14-color dichroic wheel that includes CTO (3200K), CTB (9000k) & UV filters) and 15 static GOBOs + open (3 GOBOs are beam reducers). With a color LCD display, 0-100% smooth dimming, and various strobe speeds, the Vizi Beam RX2 offers intuitive control. Two Omega brackets and an outdoor-rated locking power cord are included.

For Live Events and High-Impact Shows    OSRAM Sirius HRI 100W Discharge Lamp    0 to 100% Smooth Dimming    2° Beam Angle    DMX, RDM, Wireless DMX: 2 Channel Modes    Motorized Focus + Frost Filter    Color Wheel with 14 Dichroic Colors    2 Rotating Prisms + Gobos    Includes 2 Omega Brackets    Locking Outdoor Power Cord

• OSRAM Sirius HRI 100W discharge lamp
• Onboard wireless DMX
• Motorized focus + 16-bit fine focus
• 2° beam angle
• Frost filter to create wash effect
• High-quality glass lens
• Two rotating prisms
• 0-100% smooth dimming
• Various strobe speeds
• OTA, wireless, firmware updates
• Fan cooled

Color wheel:

• 14 dichroic colors + white (includes CTO (3200K), CTB (9000k) & UV)
• Indexable color wheel for split colors

GOBO wheel:

• 15 static GOBOs + open (3 GOBOs are beam reducers)
• GOBO shake effect

Prism wheels:

• 2 Rotating prisms
• 16 facet circular and 4 facet linear prisms

• Protocols: DMX512 and RDM
• Control mode: DMX512 and manual (onboard controls)
• 2 DMX channel modes: 12/16 channels
• Color LCD display with 4-button function menu
• 0-100% smooth dimming
• Various strobe speeds
• With wired digital communication network

Related Questions and Answers

Q: 1. do the battties charge via the light when pluged into a power source or need to charge seperately???

A: This fixture does not use batteries. AC power only.

Q: 2. Will this fit onto most light stands or just Impact stands?

A: This fixture should fit any standard light stand.I have both multiple Impact stand models as well as Manfrotto light stands, and these fixtures will fit all of them.

Q: 3. Will this work safely with a Westcott Apollo Orb or other Westcott Apollo modifiers?

A: No, the fixture with the bulbs is too large and will hit the softbox.

Q: 4. I was thinking of purchasing this to use on location outdoors. What is the most affordable portable power supply that you would recommend to use with this?

A: While a gas-powered generator would most likely be the best option for your needs with continuous lights, if you are looking for a rechargeable battery option for your location shooting needs, I would recommend either the GOAL ZEROYeti 1250 Solar Generator Power PackKit, B&H #GOGZ31901, which should give you approximately 6.6 hours of run time, or the GOAL ZEROYeti 400 Solar Generator Power Pack, B&H #GOGZ23000, should give you approximately slightly over 2 hours run time.

Q: 5. will this fixture accept other soft boxes or just the included one?

A: I believe only the included one. It takes a while to set up. Each of the spokes that tent the softbox are inserted through little sleeves down the length of the softbox and then into a hole or cavity in the face of the light fixture. Once fully assembled it's there to stay. This softbox does not collapse like most others. So it continually takes up a great deal of space. It took me several minutes to set it up and I imagine it would take the same to take it down. I bought this as a starter light for my 14 y/o daughter who is just getting into portrait photography. It's great for her and would be a great inexpensive fixture to have laying around a studio. Just know that it will take up some space. I think the photo above showing the softbox off of the light is misleading. I don't think that's possible. as the fixture itself is what gives it it's rigidity.

Q: 6. Can this be used for flat lays?

A: Yes this light kit can be used to shoot flat lays.

Q: 7. can i plug it into 220volt supply?

A: This is a multi-voltage light fixture, so you can use it on 100-240VAC.

Q: 8. Is there a max wattage rating? per socket? total wattage? Are the sockets plastic or ceramic/porcelain? Will it accommodate a mix of different wattage bulbs?

A: No wattage rating is specified. The sockets are plastic. I wouldn't put anything but CFL's in them. The soft box would overheat if you use photo floods..

Q: 9. Can the light level be adjusted, or is it always on ?

A: The Raya Octa Fluorescent 7-Socket Fixture has dual rocker switches on their back panels, each of which control on/off function for 3 or 4 lamps allowing the creation of a light ratio. You can either turn one switch on to use 3 lamps, the other switch to use 4 lamps, or both switches to use all 7 lamps at once.

Q: 10. High output means what? How bright are these at 6 feet?What is the beam angle?How much does each light weigh?

A: The Boltray 400 should be roughly equivalent to around 280-300 Watts of hot tungsten/halogen light. Yes, the beam angle is 60. And the weight per light is about 3 pounds. // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.