The Audio-Technica System 10 ATW-1701/L is a digital wireless microphone system specifically engineered to meet the audio needs of vloggers, mobile journalists, and videographers. It provides an easy-to-operate solution with sophisticated technology to ensure reliability and high-quality audio for projects ranging from YouTube and wedding videos to corporate spots and interviews.

The ATW-1701/L features an omnidirectional lavalier microphone and bodypack transmitter for hands-free speech and dialog, along with a camera-mount receiver that connects to your DSLR or mirrorless camera via the included 3.5mm output cable. It operates anywhere in the world, transmitting 24-bit/48 kHz audio in the 2.4 GHz spectrum, well away from potential TV and radio interference.

This peer-to-peer system delivers three levels of diversity assurance—frequency, time, and space—for optimal performance at a range up to 100'. Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing before a shoot. Up to eight wireless mics may be used on set at once.

Plug & Record Set for DIY Videographer    MT830cW Omnidirectional Lavalier Mic    Bodypack Transmitter    Triple-Diversity Camera-Mount Receiver    Protected Peer-to-Peer Connection    Easy to Use, Flexible Operation    Balanced Output & Headphone Output    7-Hr Batteries + USB Power    Up to 8 Mics on Set / 100' Range

• Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
• Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
• Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.
• For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

• The MT830cW lavalier microphone features an Audio-Technica cW-style 4-pin locking connector and delivers a natural, broadcast-quality sound optimized for speech intelligibility. Its omnidirectional polar pattern ensures that the sound remains consistent, even when the speaker's head moves away from the mic.
• The level control on the transmitter can be set to match the sensitivity of your microphone or audio source for distortion-free input.
• The output level on the receiver can be reduced by 10 or 20 dB if you find you're overloading the input to your camera or recording device. The 3.5mm output can be switched to deliver either a balanced or unbalanced signal.
• Both the transmitter and receiver are housed in lightweight, plastic chassis and equipped with belt clips. The included shoemount allows you to easily mount the receiver to your camera.
• With just a quick press, the power switch on the transmitter doubles as a mute function. This function can be locked out to prevent an accident.
• Conveniently, the receiver's LCD display shows critical information for the receiver as well as the transmitter—including battery status, signal level, mute status, and channel selection for both units.
• An additional 3.5mm output on the receiver allows you to monitor your signal while recording—helpful if your camera doesn't offer a headphone jack.
• The receiver features a rechargeable lithium-ion battery that provides up to 12 hours of operation. Using the included power adapter, the battery can be recharged via USB in about 4.5 hours, while in operation.
• On the transmitter's end, power is supplied by two AA batteries, giving you up to 7 hours of shooting time depending on battery type and usage.
• With this peer-to-peer system, you can only use one transmitter and one receiver at once. However, up to 8 transmitters can be paired with the receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter off and the next one on.
• For man-on-the-street interviews or if you need to pass the mic between several people, you can add the ATW-T1002 handheld transmitter/microphone to your system.

Related Questions and Answers

Q: 1. I already have a Rode PinMic that I use with a Zoom H1 for maximum discreetness when shooting weddings. Will the PinMic work with this system, or should I make sure to get the audio-technica lavalier?

A: the mic attaches by a unique to AT .. to my frustration my sony mics and sure mics will not work.Also odd with this system is the the the receiver uses 2 aa batteries (normal) the tranmitter pack must be recharged. (weird to me) I bought it for the neat antenna but I'd stick with Sony or Sure in the future. hope that helps. Pete

Q: 2. Can I use it while it is charging?

A: Yes

Q: 3. I use a Canon XA10 video camera and will be doing video shots in crowded cocktail bars. I need to find a good lavalier microphone system. I hear that the 2.4GHz is better that the UHF. Yeah? Also, I will usually be needing mics on 2 people as they'll be in the shots at the same time. (Maybe sometimes 3 people!) It seems this system is made for only 1 mic per camera?... I'm a bit new to all this, as you might be able to tell! I'd appreciate any advice or guidance. Thanks!

A: Of my 4 wireless mics the AT System 10 is the best. My other 3 mics (Sony) are analog and use the same freq band as some family radios in the US and of some world phones in Europe and Middle East. I got a lot of interference there. I only use 1 mic but I think that the same receiver can pick up several. I would wholeheartedly recommend The System 10.

Q: 4. Would I be able to use a different mic than the included Lav? What kind of adapter would be required for a mic with XLR output? It would be used with a fixed mic on a stand about 90 feet line of sight from the receiver. Sound would only be for camera sync.

A: You are NOT limited to just the included lav. There are several other mic options available including a cardioid lav AT898CW which I use, and a hand held cardioid with built-in transmitter designed for the System 10 reciever.You can also get (or make) adapters to connect XLR to the AT 4-pin with the right wiring. note that the impedence of some mics will match better than others.

Q: 5. I have AT 3000 series wireless microphones, are the connectors on my bodypacks compatible with the System 10 connectors?

A: I wish I could answer this. Right after I acquired the equipment some events happened that have prevented me from even trying it out. Sorry - I don't know.

Q: 6. Could you tell me which lav mic cpmes with it? Thanks in advance.

A: This system ships with the MT830cW lavalier. See the following link for more information: a href= http://bhpho.to/1BdG8NF target= _blank http://bhpho.to/1BdG8NF/a

Q: 7. Is the receiver unit dual band meaning can I use transmitters sending signal to one receiver unit?

A: The System 10 receiver is only capable of receiving a single transmitters signal simultaneously.

Q: 8. Is there a way to replace the receiver battery? I own this nice wireless system for about two years now and it started to drain fast...

A: Please contact Audio-Technica at 330-686-2600 to see about changing the rechargeable batteries in your wireless system.

Q: 9. Can you use more then one of these systems at the same time?

A: Users may use between 4 and 8 Audio-Technica System 10 Camera-Mount Digital Wireless Microphone Systems in tandem.

Q: 10. Can this be used without a camera? Can I record direct to my Mac using an Adobe Audition or Garage Band type application?

A: Yes if you have the adapter or interface for the Apple plug. I use the Tascam iXZ for Apple. You will also need an adapter to make it a 1/4 plug.