For MacBook users, Microsoft Surface devices, and other Thunderbolt 4 equipped laptops, the Plugable Thunderbolt 4 Docking Station offers plug-and-play connection supporting up to two monitors. Using the included Thunderbolt 4 cable, connect this dock to your device while keeping your notebook charged thanks to the 96W of power delivery and included AC adapter and power cord. Thanks to the two Kensington locks, you can keep this dock in place or display it worry-free.

Thunderbolt 4 Host Connection    3 x Thunderbolt 4 Ports    4 x USB-C 3.2 Gen 2 Ports    1 x HDMI 2.0 Port Supports 4K at 60 Hz    1 x 2.5 Gb/s Ethernet Port    UHS-II SD 4.0 Card Reader    1 x 3.5mm Headphone/Mic Combo Jack    96W of Power Delivery

While providing transfer speeds up to 40 Gb/s, the three Thunderbolt 4 ports are capable of data, video, and high-res audio. For MacBooks with M1 Pro, M1 Max, and M1 Ultra chipsets or later, these Thunderbolt 4 ports support up to dual 6K monitors at 60 Hz. For other compatible devices this dock can output video to one 8K display at 30 Hz, two 4K displays at 60 Hz or a single 4K display at 120 Hz.

Four USB 3.2 Gen 2 ports with up to 10 Gb/s transfer speeds support peripherals like mice and keyboards as well as flash drives and other accessories. The UHS-II SD 4.0 card reader allows you to transfer files without needing an additional adapter for your SD card. Additionally, the HDMI 2.0 port allows for 4K video output at a 60 Hz refresh rate. A wired network connection that provides more reliable internet is achievable using the 2.5 Gb/s Ethernet port.

Related Questions and Answers

Q: 1. Can this device be used to power the computer to which it is connected ?

A: Yes, the Silicon Power SR30 8-in-1 Docking Station can transmit power via the USB-C host connection, up to 100W.

Q: 2. Does the AkiTio unit have a power switch for the fan as in the description (even though the photo on B&H shows none)?

A: No, the OWC 4TB AKiTiO Thunder3 RAID Station (2 x 2TB) BH #OWTB3RSDK04T does not offer fan control.

Q: 3. Can this work with a thunderbolt 2 adaptor?

A: I'm sorry, but it must be a native Thunderbolt 3 connection.

Q: 4. Does this enclosure support the new Seagate 24 TB drives?

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station does not have a limit on the size of drives you can use.

Q: 5. Can this enclosure be used for raid0 confuguration with Window Storage Spaces?

A: Yes, this enclosure can be used in a RAID 0 configuration when using a software controller such as Windows Storage Spaces.

Q: 6. Is WD 6TB Network HDD Retail Kit (WD60EFRX, Red Drive) 100% compatible with this device?

A: Yes. This dock is fully compatible with the WD RED 6TB Drives.

Q: 7. I have an iMac (Retina 5K, 27-inch, Late 2015). I have tried to connect the USB-C on the AKiTiO to the USB port on the computer but I get the message , "Cannot Use Thunderbolt Accessory." I then bought an Apple Thunderbolt 3 to Thunderbolt 2 adapter and connected the AKiTiO using the supplied cable but there is no indication of any connection on the computer whatsoever, not even in Disk Utility. Can I use this drive with my computer?

A: The Thunder3 will only work with native Thunderbolt 3 connections. It will not work on loder computers with the Apple adapter.

Q: 8. When installed with 5 drives and connected to a pc does it show up as 5 individual drives or as one large drive?

A: You would see each individual drive. This housing does not support RAID setups on its own

Q: 9. Does this drive support 16TB drives? Or does it support any drive? Like can it put 4 16TB+ Drives in this?

A: According to Sabrent, you can use any 3.5" disk of your choosing for the Sabrent USB 3.2 Gen 2 4-Bay 3.5" SATA Hard Drive Tray-Less Docking Station (B&H # SADSSC4B).

Q: 10. Have the fixed the fan noise issue with the current model?

A: We do not currently have a spec from OWC regarding the Gemini Thunderbolt 3 Dock's fan noise.