Add optional 15mm rods to the top of your Sony BURANO rig to mount a matte box, monitor, EVF, or follow focus using this Front 15mm LWS Dual-Rod Clamp from Wooden Camera. This rod clamp features 15mm LWS rod port spacing and requires the separately available Top Plate for BURANO. It mounts onto the front of the plate using the two included screws.

There are also three 3/8"-16 anti-twist threads on the front of the clamp to add more accessories, such as bolt-on rods, the Wooden Camera EVF System, or extension arms.

Add 15mm Rods to Top Front of BURANO    Requires Top Plate for BURANO    Additional 3/8"-16 Mounting Threads    Works with Optional EVF System    Durable Aluminum Construction

Related Questions and Answers

Q: 1. Does this baseplate gets the Red Komodo to standard rod placement?

A: Yes, the Tilta 15mm LWS Arca-Type/Manfrotto Dual Baseplate Kit (Black) gets the Red Komodo to standard rod placement.

Q: 2. Is this the same item from WC's website? MFR (#A40021) "LW 15mm Baseplate (Sony FX3, FX30, Fujifilm GFX100S, X-H2S, X-H2)".

A: Yes, the Wooden Camera LW 15mm Baseplate for FUJIFILM GFX 100S & X-H2S is Wooden Part number A40021. This baseplate model supports the following camera cages from Wooden (Sony FX3, FX30, Fujifilm GFX100S, X-H2S, X-H2). Wooden link: https://bit.ly/3pH1YLb

Q: 3. Will this work on the FS7M2? It looks like it wouldn't allow the viewfinder to retract since the fs7m2 has a larger thumb screw on the viewfinder where it's held to the rod.

A: Hi David, You should be able to use this kit with the FS7 MKII LCD and please note that new stock version use a square rod on the rail adapter. You should not have any clearance issues adjusting your LCD.

Q: 4. Does this only fit the Blackmagic 6K or can this baseplate accommodate other cameras like Canon R5C?

A: The Wooden Camera 15mm LWS Baseplate for Blackmagic Pocket Cinema Camera 6K Pro (B&H# WOA10026) could be used with the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C).

Q: 5. Will this work with the Tilta dovetail vase plate?

A: Yes, this is set up to easily attach to the Tilta Standard Lightweight Dovetail Plate.https://bhpho.to/2s2bwQk

Q: 6. Is this product made of metal?

A: The rail mounting clamp and bolt are metal. The battery and microphone input block is plastic (except for electrical connections and a few small pieces on the xlr inputs. The plastic has so far held up fine -- without receiving 'kid glove' treatment. Biggest issue is that there is nothing that locks batteries in place, and the shape makes rigging a solution a bit of a chore. As a cord-cutter, we've ran a BMPCC for a good eight hour day with almost no off-time, and plenty of checking takes - and could have gone hours more. Keep an eye on camera temp during extended 'camera on' shoots - especially if shooting time lapse in RAW format - parts of the camera can get too hot to touch and suffer damage. This not an 'approved' Blackmagic device, so may lack some form of power management on a camera that has no self-cooling system. Note the xlr inputs are just converters (not a preamp and offer no phantom power). Otherwise, a good, budget solution with a touch of DIY to keep batteries on the unit. For pro use, there are better and, naturally, more expensive choices. That said, ours is still in the field...

Q: 7. Will the lens support post work with Zeiss CP.2 EF lenses? It doesn't look like it will stand out far enough from the camera body to align with the lens support thread.

A: You'd have to make sure the camera is positioned such that its mount is roughly flush (or in front of the front) of the the Wooden Camera 15mm LWS Baseplate for Blackmagic Pocket Cinema Camera 6K Pro (B&H# WOA10026) in order to use a lens like that.

Q: 8. Can you attach the original Sony FS7 Mic mount back to the other side of the rod?

A: Unfortunately, no you cannot put Sony's Microphone mount onto the end of the Wooden Camera UVF rod. Although the Sony rod is also 15mm size, their mount actually uses small screws to go into threaded holes in their rod. We suggest you consider these two products from Wooden Camera.

Q: 9. What type of connector is at the end of the cable? Can it power other cameras?

A: It is a 2-pin Weipu connector found on Blackmagic Pocket Cinema Cameras. The IndiPRO Tools Dual NP-F Power System with 15mm Rod Mount is only compatible with the Blackmagic Design Pocket Cinema Camera 4K/6K.

Q: 10. The cable is listed as being "Coiled 24 to 36" Camera Power Cable", however in the photo it is not coiled and does not appear to be very long. Can you verify that the maximum length of the cable is 36" and whether it is coiled or not?

A: The IndiPRO Tools Dual NP-F Power System with 15mm Rod Mount cable is coiled despite the images on our site.