Mount your B-Box onto your Sony BURANO cinema camera with this B-Box Bolt-On Mount from Wooden Camera. This mount attaches to the top of the separately available B-Box and provides a 3/8"-16 anti-twist mounting screw to mount the B-Box onto the side of the Wooden Camera Top Plate for Sony BURANO. Its compact, low-profile design provides a solid, lightweight connection to your rig.

Mount B-Box onto Sony BURANO    Mounts onto B-Box with 2 x Screws    Mounts on Top Plate with 3/8"-16 Screw    Compact, Low-Profile Design

Related Questions and Answers

Q: 1. Will this mount to a Sony F3?

A: This is not compatible with the Sony F3.

Q: 2. Can I attached the Wooden Camera UVF Mount to the SHAPE top plate for FS7?

A: This is an unknown combination that I am afraid that can only be answered by trying it. I would be of the opinion that you could fit either of the Wooden Camera pieces to the camera but not at the same time.

Q: 3. This is a 5 pin lemo, this should work with Z Cam e2 cameras? If not can you point us to one that will work with Z Cam, thanks

A: We do not think the Wooden Camera A-Box Adapter Box for the Ikonoscope Camera will support Z-Cam camera models. However, the MID49 Audio Breakout AB-1 listed below will support Z-Cam cameras. MID49 Audio Breakout AB-1 for Select RED, ARRI & Z Cam BH #MIM49BOBAB1 • MFR #M49-BOB-AB1

Q: 4. And what about the Sony Fx9?

A: The Wooden PL to E-mount adapter supports the following Sony camera models. Sony Alpha, FS7mkII and FX9

Q: 5. Will the Vmount battery used on the back of the cradle pass through cradle and still power the camera too?

A: The Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) passes through the V-mount battery power to the camera, as well as providing a power source for the Teradek.

Q: 6. Will this be compatible with the new A7S III?

A: Yes this will work with the A7Siii

Q: 7. Will this work with a Sony FS100?

A: The mount itself would work, however the support bracket likely not. The bracket is meant to be used inverted and hang from a Wooden Camera FS7 Top plate, something not possible with the NEX-700. I would suggest the Metabones MB_PL-E-BT1 PL to E-Mount Adapter with Internal Flocking B&H # MEMBPLEBT1 as the most affordable solution. There are three alternatives to this that are very compatible to the NEX-FS100. They are more robust and will do a better job of maintaining the lenses back focus. Please see below.

Q: 8. How long is the Lanc cable inside the D-box, and can it make it to the front Lanc port on the camera?

A: Unfortunately, the manufacturer does not provide this specification and since this is a special order item, we have no way to physically verify this... For your convenience: support@woodencamera.com

Q: 9. i want uses with my sony fs7,does it have magnification factor? thanks

A: The Sony FS-7 has a Super35 sensor. The PL lens mount was developed for film cameras with Super35 apertures. So among PL mounted lenses and cameras, there is no change in the field of view or magnification. As near as I know, there is no full frame PL mount camera so you will never see a difference among PL mount Super35 cameras while using PL mount lenses. (An exception of course is if you go to a camera with a PL mount but with a smaller sensor than Super35.)I strongly suggest that using crop factor or lens magnification as tools be dropped. Just learn what the wide-normal-tele lens mm's are for each camera you are using. For me it makes no sense wasting time calculating for a format you are not using.

Q: 10. will this work on sony fs7 markII? and on sony fx6?

A: It works for sure with the FS7M2, Wooden Camera has not verified that it works with the FX6--yet.