Add a 3-pin control option to your Sony BURANO cinema camera with this Remote Cable from Wooden Camera. The cable features 3.5mm connectors on each end that connect the camera's remote port with the B-Box for Sony BURANO. The connection enables the 3-pin LEMO-type connector on the B-Box to be used for run/stop control of the camera.

LANC Cable for Remote Control    Connects BURANO Control with B-Box    Enables 3-Pin Connector for Run/Stop    3.5mm Connectors on Each End

Related Questions and Answers

Q: 1. Will this cable work with PocketWizard Plus II transceivers and a Sony a7r3III?

A: The S-VPR1-ACC cable is fully compatible with the Plus III and the MultiMAX radios but not officially compatible with the Plus II. It may work if the camera stays awake. You can try setting the camera's sleep timer to longer than the default. We recommend the 13369-S remote camera cable for a Plus II: https://www.bhphotovideo.com/c/product/1481561-REG/pocketwizard_13369_sony_remote_camera_cable_for.html This cable will work with any PocketWizard radio and also has a USB connector which lets you to connect to an external power source to power your remote camera. Power source can be purchased separately.

Q: 2. Does it take Diopters?

A: The bellows ring included in this kit integrates a 138mm slot for round polarizers. If you are mounting the diopter directly to your lens, you may then use the appropriate clamp-on ring that accommodates the front diameter of the lens.

Q: 3. Will this work for a sony a6000 and a PW Plus X model? Thanks

A: Hi Íosac - The S-VPR1-ACC cable is officially compatible with Plus III and MultiMAX radios (with current firmware). We recommend a different cable for the PlusX - the 13369-S remote camera cable: https://www.bhphotovideo.com/c/product/1481561-REG/pocketwizard_13369_sony_remote_camera_cable_for.html The 13369-Sony cable will work with any PocketWizard radio and has the added benefit of a USB connector which enables you to connect to an external power source to power your remote camera. Power source can be purchased separately.

Q: 4. Will this work with an A7r4?

A: Yes, it is compatible with the A7RIV.

Q: 5. Can this be used for USB out to computer for photo download/mass storage? Or is the USB exclusively for battery power?

A: This cable is only useful for triggering the camera with a pocket wizard.

Q: 6. Is this safe to use with the Sony FX3 camera? I understand it uses the same battery as A7sIII, but I wanted to be absolutely sure, as I wouldn't want to brick my FX3. Also, would it show any errors that it's using a 3rd party battery?

A: Yes, the Wooden Camera D-Tap to Sony a9 / a7R III Dummy Battery Power Cable is compatible with the Sony FX3. There is a built-in voltage regulator and reverse polarity protection.

Q: 7. Can it power the Canon cine servo zoom lens 25-250mm ?

A: You would need the following power cable accessory: https://bhpho.to/33da5US

Q: 8. Does this cable also provide power to the PocketWizard? Looking at it for a situation where I might need to have a remote camera setup for a week+ without access to it to swap out batteries

A: No.

Q: 9. I have a Zacuto Pro Baseplate & Amira. The Zacuto riser block doesn't go high enough is there a accessory to make swing away?

A: To convert the Wooden Camera UMB-1 Universal Matte Box (Pro) to a swing-away, you can use the Wooden Camera Swing-Away Arm for UMB-1, B&H # WO202800.

Q: 10. Will this work with Sony A7s III?

A: Yes. The following dummy battery will work.