This is a V-mount Battery Adapter Kit compatible with the fos/4 Panel light fixture from ETC.

For ETC fos/4 Panel Light Fixture

Related Questions and Answers

Q: 1. Will charging stop automatically when battery is full?

A: Yes, the BLUTEC 95Wh V-Mount Battery and Charger Kit will stop charging when the battery is full. The red LED on the charger will turn green once charging is complete, and stop charging.

Q: 2. How long would it run with (2x) 150wh batteries?

A: The run time would be about an hour.

Q: 3. Is this dual battery plate compatible with the Gemini 1x1 also? I know they make a single battery plate for 1x1, but curious about full power on the 1x1 with battery power.

A: According to the manufacturer with this plate you can get 100% power on the 1x1. The single battery plate will give you about 90% output.

Q: 4. Its a little confusing. This adapter convert a 14.8V battery to 26V at output so it can power a Mixpanel?

A: This is a step up adapter to increase voltage of a 14.4 battery to a 26v level that a Mixpanel requires.

Q: 5. Can I use this to power my Red Komodo while using the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO? I only have gold mount batteries and don't want to start over.

A: Yes you can.

Q: 6. What light is this suitable for? Will it work with PavoTube 30C?

A: This is for the Nanlite Forza 60/60B lamp heads. For the Pavotube 30C, you may use the Nanlite D-Tap to 5.5mm Male DC Barrel Power Cable, BH # NACBDTDC which connects to any V-mount or Gold Mount battery that has a D-Tap connection. https://bhpho.to/30pooEi

Q: 7. Will two of these fit, mounted on the Forza 500, plus two 14v batteries mounted to the adapter?

A: This adapter is not designed for use with the Forza 500.

Q: 8. Is it possible to use this to power a traditional E27 bulb with NP-F battery via the E27 socket?

A: The Nanlite NP-F Battery Adapter and Mount for PavoBulb 10C is for led lamps not regular light bulbs. And is made for the PavoBulb 10C. Which does not draw that much power.

Q: 9. Does this work with only Bebob B-mount batteries or any B-mount battery can work ?

A: The bebob B-Mount Battery Adapter for V-Mount Camera would support the new Arri B-mount battery standard and work with any battery brand that supports B-Mount.

Q: 10. Can you power stuff through the v-mount? Or just the dc output.

A: There are 2 different ways to power with this unit. You can power directly from the V-Mount connection from the back of the plate or through the 2.5mm output jack that is located on the side. You will just need the 2.5mm connector cable to power your specific device/camera.