Voiced specifically to work with HT Venue MK III amplifiers and a vast range of other products, the HTV-212 MK III from Blackstar is a straight extension speaker cabinet loaded with a 2x12" Celestion Seventy-80 driver configuration and supports up to 160W of power. With an open-back design, finger-locked (comb) joints, heavy-duty wiring, and a timeless boutique styling, this cab delivers a powerful sound and a cool vintage look for impressing audiences, or your bandmates, on any stage.

This cabinet sports a 4- or 16-ohm mono input and two 8-ohm stereo inputs. The rugged construction ensures your cab will survive tour after tour without fear of breakage.

Voiced to Work with HT Venue MKIII Amps    2x12" Celestion Drivers    160W Power Handling    Open-Back Design    4- or 16-Ohm Mono, 2 x 8-Ohm Stereo    Finger-Locked Joints    Heavy-Duty Wiring    Boutique Modern Styling    Rugged Construction

Related Questions and Answers

Q: 1. Would these work on an EOS R with the EF-R adapter using an EF lens?

A: Yes, an EF lens on the R adapter will work with these extension tubes with full electronic communication.

Q: 2. How about making it work with the C100 dual-pixel for touch focus? (with a FREE firmware update)

A: At this time, this monitor is for the C200 and C200B only.

Q: 3. Would inserting one of these (or any tele converter) between the RF 100-500 lens and the RF 1.4X (or 2.0) tele extender, allow the lens to extend BELOW 300 mm? If so, would the lens then NOT be able to focus to infinity? Thanks.

A: Teleconverters and extension tubes have different usages and are not often used simultaneously. A teleconverter is is designed to increase the focal length of a lens by the multiplication factor listed on the teleconverter, giving you additional reach to your subject. Extension tubes are designed for macro photography, and are designed to reduce the minimum focus distance of your lens while increasing magnification, and also eliminate the ability to focus at infinity or use the lens for normal shooting. Hypothetically, using a teleconverter and an extension tube simultaneously with a telephoto lens would reduce the lens' would allow you to focus closer than the lens' listed 2.95 feet (90 cm) minimum focus distance, and would also prevent you from focusing at infinity, essentially making it a long macro lens. Unfortunately, as this is an unorthodox setup, and as the Canon Extender RF 1.4x and the Canon Extender RF 2x is designed to connect directly to the lens (the optical element on the teleconverter is designed to sit inside the rear of the lens for optimum optical performance), I cannot state if the setup you describe would work, nor if the lens would focus properly with the teleconverter's optical element out of its designed alignment inside the lens, and this would not be something we could test.

Q: 4. Is there a shorter option?

A: We're afraid not. This is the only extensions cable option we have available at this time for this kind of cable.

Q: 5. how much do these weigh?

A: The total weight of this Meike MK-RF-AF1 13mm and 18mm Extension Tubes for Canon RF would be 2.5 oz. The 18mm Extension Tube would be 1.4 oz, and the 13mm would be 1.1 oz.

Q: 6. How many 1/4-20 screw mounting holes does this have? Is there one on the bottom, or is there only one on the side?

A: There are two 1/4 20 threads on the Canon LM-V1. There is one on the side of the monitor and one on the bottom.

Q: 7. Do these extension tubes come with end-caps, and possibly a soft case?

A: These tubes come with caps.

Q: 8. Hi there! Do these tubes have gaskets? Will my Z6 still be weather sealed using these tubes with the Nikkor Z 24-70 2.8? Thanks!

A: No, these tubes are not weather sealed.

Q: 9. Will this work with the Canon RP Body + RF 24-240mm lens?

A: Yes, these extension tubes are compatible with the RP and the 24-240mm lens.

Q: 10. Can the length or height be changed quickly?

A: Yes, this hand grip acts as the lever to change the height very quickly.