Available for download, the Arturia CZ V is a phase-distortion cult classic that models two classic Casio keyboards, the CZ-101 and the CZ-1000, both used in many hits from the 1980s. The DSP team at Arturia has reverse-engineered the code used inside the seminal keyboards and modeled circuitry like the DAC outputs, doing so in order to give you an authentic Casio sound.

For both synths, the GUI presents you with a relatively simple interface. You won't need to figure out how to use data-entry buttons or small LCD screens. Instead, a streamlined front panel makes manipulating the phase distortion synthesis an intuitive affair. When you need to dive deeper, a graphic interface is on hand to show you all the parameters of the DCOs (digitally controlled oscillators), DCWs (digitally controlled waveshapers), and DCAs (digitally controlled amplifiers) emulated within.

Other panels such as the Advanced Envelope Control and an Advanced Modulation Matrix allow for tone-shaping in the extreme. You can even go beyond the original timbre of the Casios with the custom phase-distortion editor, which lets you draw and save your own custom waveforms. You'll also appreciate two additional LFOs, a combinator section, macro controllers, and a syncable arpeggiator.

With an 8-voice unison mode, 32-voice polyphony, an in-depth vibrato section, and more, this software synth provides interesting sounds in both studio and live environments. The CZ V is compatible with Mac and Windows platforms, and can operate in standalone mode or as a plug-in within your DAW in the AU, VST2, VST3, NKS, and AAX Native formats.

2 Classic Casio Keyboards Modeled    Casio DAC Outs Modeled for Authenticity    Simplified GUI for PD Synthesis    Interface Expandable for Deep Tweaking    Multiple Opportunities for Modulation    Powerful Preset Browser    Resizable GUI    Maps to Multiple MIDI Controllers    Standalone or Plug-In, Mac/Windows    AU, VST2, VST3, NKS, and AAX Native

• Two synthesis lines and independent noise source
• All CZ-101 / CZ-1000 original parameters
• 8 original waveform and custom waveform editor
• Original CZ SysEx import
• CZ, DADSR and multisegment envelopes (syncable and loopable) to control pitch, DCW, and amplitude
• 2 modulation envelopes
• 4 assignable macros
• Advanced modulation matrix
• A sample-and-hold module
• LFOs with 6 waveforms
• 3 sources combinators 
• Arpeggiator
• 4 FXs slots that can be routed in series or per synthesis line
• A synthesis line state viewer for real-time feedback
• Emulation of the original CZ DAC
• 32 voices of polyphony
• Up to 8 voices of unison with unison detune
• Over 400 factory presets

Search by name or select the appropriate tags to home in on the sonic character you're seeking. You can mark and recall your own favorites, enter comments, and set up playlists.

You can decide whether you want to fill the screen with graphic reproductions of the classic instrument, or whether you want to scale the window down when you're working in a DAW and screen real estate is at a premium. You can also zoom in for detailed work.

The software intuitively maps with the Arturia KeyLab range of controllers and plays nicely with other MIDI controllers too. You can use the software in standalone mode, or implement it within your preferred DAW. You can even play notes using your computer's keyboard, when you're on the go.

Related Questions and Answers

Q: 1. do they make one for canon?

A: Yes, you just have to make sure you get the cable that matches your flas. The battery themselves are universal, the cables are not.

Q: 2. Would this word with a countryman xlr lav? If not, I wish someone would make a lavalier system that would just record high quality audio from the mic. In today's world of synching in post, it would be far more reliable than a wireless system. Have tried consumer voice recorders but don't get quality I want. And, frankly, it just looks ghetto.

A: The Tascam DR-10x recorder is designed specifically to work with dynamic handheld ENG mics. It is not able to provide phantom power to mics that require it such as the Countryman lavaliers hardwired with XLR connectors.

Q: 3. Will this work with Yongnuo 685? If so, what cables or cords do I need?

A: I am not familiar with the Yongnuo flash. As a former EK sales rep, I would say your customer's best bet would be to contact Turbo Customer Service direct. I can tell you that they do stress the importance of using the correct cord with the flash. Good luck.

Q: 4. Hello, Tascam shows this item not available in the U.S on their site does this effect you?

A: This is a new New Item, Available for pre-order.Expected availability: End of November 2014

Q: 5. Does this convert unbalanced TRS to balanced XLR?

A: TS connection mics are usually only compatible with the mic transmitters or mic inputs that they are made for specific compatibility with.

Q: 6. Will this work with Rode Reporter Omnidirectional Handheld Interview Microphone or can you suggest a wireless solution for this mic?

A: The Rode Reporter is a dynamic XLR microphone. A wireless system like this would be a good option to use with it: https://www.bhphotovideo.com/c/product/1187383-REG/rode_news_shooter_newsshooter_kit_digital_wireless.html?sts=pi&pim=Y

Q: 7. Is it possible to pair 3 recievers to one transmitter. In other words, if the talent wear the transmitter, can it transmit his audio to 3 cameras?

A: Unfortunately it cannot. Each transmitter can only be paired with one receiver at a time. If your cameras are stationary, you could connect the AVX receiver to an audio mixer and split the output signal to your 3 cameras via cables.

Q: 8. Can you use this wireless microphone & receiver for vocals only with a mixer?

A: The Sennheiser AVX EKP Camera-Mount Digital Plug-In Receiver is just the receiver only, not a complete system with a wireless microphone. But this receiver can be connected to any device with an XLR mic input, like a professional camera, recorder, amplifier, or mixer. You can use the receiver with the included XLR to 1/8" (3.5 mm) DSLR adapter cable to connect it to a camera, recorder, or other device with a 3.5mm mic input or use it together with an additional a 1/4" adapter to connect it to a 1/4" mic input. The complete system with a handheld mic/transmitter is the Sennheiser AVX-835 SET Digital Camera-Mount Wireless Cardioid Handheld Microphone System (B&H # SEAVX835SET4).

Q: 9. Can this work on my Nikon 910 flash?

A: Per Quantum website, Turbo SC power pack with CKE long coiled cable may be used with Nikon SB910 .

Q: 10. Can someone describe what is connected to each 1/8 in. connection (tip. ring, sleeve) in terms of signal, power, and ground?

A: A specific TRS input wiring schematic is not available for the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion, however we can confirm that the D-XLR is compatible with microphones using the 3.5mm "Sennheiser" wiring configuration for compatibility. This adapter is not compatible with microphones wired for compatibility with Sony input connections.