Enjoy 120" of bright, colorful video with 4K and Dolby Vision support using the LTV-3500 Pro 3300-Lumen XPR 4K RGB Laser Projector with ALR-C120 Fixed Frame Screen from AWOL Vision. With a 0.25:1 ultra short-throw ratio the LTV-3500 Pro is designed to be placed on a flat surface right under your screen for massive home entertainment in a small footprint. To complete the setup, this AWOL Vision bundle includes the ALR-C120 120" Cinematic ALR fixed frame screen.

Brightness of 3300 ANSI Lumens    120" ALR Fixed Frame Screen Included    RGB Triple Laser Light Source    FHD (1920 x 1080) Native Chip Resolution    UHD 4K Resolution via XPR Technology    0.25:1 Ultra Short-Throw Ratio    Dolby Vision, HDR10+ & HLG Support    3 x HDMI 2.0b Inputs    HDMI eARC & Optical Audio Outputs    Control 4, PJLink & SAVANT Compatible

The LTV-3500 Pro is a true RGB triple-laser projector offering some of the highest color accuracy currently available in home projection. It has three HDMI 2.0b inputs with 4K and HDR support, including support for Dolby Vision.

The LTV-3500 Pro offers Dolby Vision, HDR 10+, Dolby Atmos, and active 3D support. It stands out as one of the most comprehensive ultra short-throw RGB laser projectors available.

The implementation of laser dimming technology has greatly improved contrast, leading to a significant enhancement in image quality over previous models.

AWOL is now seamlessly integrated with Control4. Easily control the projector's power, volume, HDMI source switching, and more through Control4.

Optimize the image of LTV-3500 Pro ultra short-throw laser projector with the ALR-C120 Cinematic ALR Fixed Frame Projection Screen. Fully tensioned in a slim 0.4" aluminum frame, the 120" diagonal ALR-C120 hangs on the wall and is designed to reflect the light coming from the projector below it, while rejecting ambient light coming from overhead, providing a clear, colorful image, even with the lights on.

• Ricoh F2.0 glass lens
• 8-point keystone correction
• Full RGB color management system
• Active 3D ready
• 24 FPS movie mode
• 8 ms response in 1080p
• 15 ms in 4K
• 107% Rec.709 coverage
• Control 4, PJLink, and SAVANT compatible
• Lower cost of power comopared to LED TVs
• Screen rejects 95% of overhead ambient light
• Included screen has a 170 degree viewing angle

Related Questions and Answers

Q: 1. 15 ft. or less onto a concrete wall from dusk to dark. Will this work? A borrowed Panasonic pt-ax200u worked, I want my own proj

A: The Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector, B&H # EPHC1080W, will be able to project onto a concrete wall, however the image quality will not be best verses a projection screen.

Q: 2. Will this projector work in an illuminated room?

A: The Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector BH #EPHC1080W is designed to work bes in a room with low ambient light.

Q: 3. Does this unit 3D capable ?

A: The Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector (B&H # EPHC1080W) does not support 3D projection.

Q: 4. If I put the magnetic plate on the small HD focus, will I still be able to attach a sun hud?

A: Yes, you will still be able to attach a sun hood.

Q: 5. Do these diopters fit this model? https://www.bhphotovideo.com/c/product/1601363-REG/manios_digital_film_lcdvf46dk_kinotehnik_46mm_close_up_lens.html/reviews

A: Yes, The Kinotehnik Viewfinder for SmallHD FOCUS HDMI, BMPCC 6K/4K with 5" LCD Screen is compatible with the following Diopter kit. https://bhpho.to/3GPapa5

Q: 6. will this work with the small hd 503 ultrabright?

A: Yes, it will.

Q: 7. Can I play video and picture files from a flash drive?

A: Yes. The Epson Home Cinema 880 3300-Lumen Full HD 3LCD Projector BH #EPHC880P • MFR #V11H979020 features a USB Port for Multimedia Playback.

Q: 8. can the connector to the camera be used with an I phone?

A: I'm not aware that you will be able to mount this to a phone. But if the Kinotehnik Viewfinder fits over your phone screen it could magnify it. However with this said this product is not designed to be used with phones and you would need to test it.

Q: 9. i ripped my old silver white fabric, is this a replacement that will fit my 4x6 frame?

A: Yes, this is a replacement. Always look for the PRO designation when looking for the 4x6 size. The one you have here is quite secular and reflects the greatest amount of light. Hard light remains hard and soft light remains soft. If you wish to soften your light you would want the ZIG-ZAG Silver/White.

Q: 10. How do I set the start DMX channel? It seems to default to channel 1 as the start with no way to change to another number. I tried the app also but no DMX settings in there. (I have several of these I purchased from you but the manual doesn't say and I cannot find the information online!). Thank You!

A: This is a copy of the manual. If you have any other concerns please contact Savage directly. DMX Operation Connect the DMX output to the Savage RGB Pro Panel and turn the panel on. The panel should automatically detect the controller and switch to DMX mode. The panel display will say: “DMX 512 with RGB..” Below the readout, the channel information will display. Channel 1: Center Channel 2: Red Channel 3: Green Channel 4: Blue The DMX512 will default to channel one, but four channels are supported. Set channel one to any number above zero (we recommend the 50% position). The panel’s functions supported in DMX mode are RGB, hue/saturation/intensity and CCT. Red, green and blue can now be controlled individually. To change modes. Press the “Menu/Intensity” button one time. The menu will display the following: DMX 1/SW 2/R 3/G 4/B 1/SW 2/I 3/S 4/H 1/SW 2/BRI 3/CCT The number before each letter is the channel number for the selected function. The first line is the RGB mode and when selected will allow the user to make red, green and blue adjustments. The second line allows the user to adjust the intensity, saturation and hue of the selected color. The third line allows the user to switch to CCT mode. To change modes, rotate the “Menu/Intensity” clockwise until the desired mode is highlighted. Press the “Intensity/Menu” button again and the light will switch to the selected mode and be controllable with the DMX contro