Get creative with tempos using the black 4ms Shuffling Clock Multiplier Kit, a DIY Eurorack module that produces eight multiplied clock tempos from a single input clock. The multiplied clock signals range from x1 to x8 (x32 using the separately available breakout module) and include five slipped/shuffled/skipped clock outputs including x3, x4, x5, x6, x8, as well as three steady clock outputs including x1, x2, and x8.

The Rotate CV jack reassigns the multiplication number on all jacks, while the Slip CV causes particular beats to land ahead in time. The SCM Kit includes all the components needed to complete the module as well as a black panel.

Full DIY Kit    Beginner Level Build    8 Multiplied Clock Tempos from Clock In    x1 to x32 Multiply Range    Slipped/Shuffled/Skipped Clock Outputs    x3, x4, x5, x6, x8 (S3, S4, S5, S6, S8)    Steady Clock Out: x1, x2, x8    Rotate CV Input Reassigns Multiply Jack    CV Slip Causes Beats to Land Early    Compatible with SCM Breakout Module

• Includes all the parts necessary to build a full-featured QCD Expander
• Intermediate/Advanced-Level Kit: Soldering proficiency required
• Tools Needed (Not Included):
  • Soldering iron, solder
  • Flush snips
  • Needlenose pliers (for removing a component if you make a mistake)
  • 5/16" and 3/8” socket driver (optional: pliers will work too if you're careful)
  • Multimeter (for reading resistor values if you don't know the resistor color-code chart)

• Multiply-by-1 to Multiply-by-32 (x32 with optional breakout module), on 8 output jacks
• Five Slipped/Shuffled/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)
• Three steady clock outputs (x1, x2, and x8), which are not affected by Slip/Shuffle/Skip effects
• CV Rotate jack to shift multiply-by amount on all jacks
• CV Slip causes particular beats to land ahead in time
• Connects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Resync, Mute, and 4x Fast
• ISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code
• Maximum input frequency 3 kHz

• Clock Input (3.5V to 15V clock, rising-edge triggered)
• CV Rotate (0V to +5.1V input)
• CV Slip (0V to +5.1V input)
• Multiplied clock outputs (8 jacks where R is the CV rotation 0 to 7):
  • Multiply-by (1+R)
  • Multiply-by (2+R) and slip/shuffle/skip
  • Multiply-by (3+R) and slip/shuffle/skip
  • Multiply-by (4+R) and slip/shuffle/skip
  • Multiply-by (5+R) and slip/shuffle/skip
  • Multiply-by (6+R) and slip/shuffle/skip
  • Multiply-by (7+R) and slip/shuffle/skip
  • Multiply-by (8+R)

• 4 HP Eurorack format module
• Maximum Depth: 1.39" (35mm)
• Includes power ribbon cable with 16-pin Eurorack power header
• Power consumption: +12V: 33mA, -12V: 4mA

Related Questions and Answers

Q: 1. What size would work for the Godox V860ii for Olympus?

A: The large 1.9"x3". https://www.bhphotovideo.com/c/product/1453699-REG/vello_flash_multiplier_diffuser_attachment_with.html

Q: 2. Will the Dracast 1000 LED panels fit in this case, or are the yokes too tall?

A: Yes they will fit

Q: 3. I ordered this and now am looking for a laser pointer so I can trigger this via a laser. Which color laser should I be using? If it matters the distance from the laser pointer and the receiver will never be more then 20-30 feet.

A: This option will work very well "Quartet MP-1200Q Class Three Standard Pen Size Laser Pointer BH #QUMP1200Q • MFR #MP-1200Q"

Q: 4. Does it work with the Godox V1 for Nikon?

A: Unfortunately, this softbox is not compatible with the Godox V1.

Q: 5. Will the flash multiplier fit a Nikon sb-700?

A: This will not fit a SB-700.

Q: 6. Will this work with A Fujifilm x100T?

A: You would need to purchase the Impact Shutter Release Cable for Canon Cameras with Sub-Mini Connector, B&H # IMC2.5CANSM, to connect the hahnel Captur Pro Module to the Fujifilm X100T Digital Camera. With the above cable, yes, it would be compatible for your usage needs.

Q: 7. Will this work on a Nikon SB910?

A: Yes. I have both the SB900 and the SB910. The adapter is not perfect. Mine doesn't square up with either flash head, but close enough.

Q: 8. Can this be adapted to fit a Yongnuo 968EX-RT?

A: Yes, but the following adapter is needed in order to mount the system. Vello Flash Multiplier Adapter for Small 1.5 x 3" Flashes BH #VEFMASM • MFR #FMA-SM https://www.bhphotovideo.com/c/product/1415805-REG/vello_fma_sm_flash_multiplier_small_adapter.html

Q: 9. Which of these would fit well on a Sunpak DF3600U?

A: While the Sunpak DF3600U has similar dimensions to the Canon 580EX series flashes, this adapter could work. However, it has not been tested to our knowledge.

Q: 10. Will this fit a Godox AD200 and if not which Vello will?

A: The Vello Flash Multiplier-Diffuser Attachment should be a nice tight fit for you AD200. with the standard head. The bare bulb head will not fit.