Whether for emergencies or adventures, the 522 Portable Power Station from Anker gives you the freedom to power your devices off the grid. It delivers 300 watts, with 600 watts surge capacity for startup demand by tools or appliances. Two AC outlets, two USB-C ports, one USB-A port, and a car-style power outlet offer ways to plug in your gear. The power station can be charged in 3.5 hours from an AC power source or 2.7 hours via solar power. It can also be charged via USB-C or your vehicle's auxiliary port.

300W AC Inverter (600W Surge)    299Wh LiFePO4 Battery    Two Grounded AC Outlets    Two USB-C Ports, One USB-A Port    Car-Style DC Output Jack    Recharge from AC in 3.5 Hours    Charge from AC, USB-C, or Solar    Real-Time Power Input and Output Display    LED Light

• 300W (600W surge) AC power from two grounded wall-style outlets
• One 12 VDC car/vehicle socket
• One USB-C PD 60W in/out port, one USB-C 20W port, one USB-A port

• 13.4Wh camera battery: 19x
• 19Wh tablet: 13x
• 40Wh drone: 6x
• 5W LED bulb: 39 hours
• Wi-Fi router: 19.4 hours
• CPAP machine: 6.5 hours
• 45W portable freezer: 5.8 hours

• Easy-to-read battery level indicator
• LiFePO4 cell chemistry
• 299Wh capacity
• Designed to perform for 10 years
• Control system monitors temperatures up to 100 times per second
• Unibody design
• Power-saving mode

Related Questions and Answers

Q: 1. What is the plug length for the power station?

A: Omnicharge has not provided details on the length of the power cable included with the Omnicharge Power Station 10X.

Q: 2. What do is "digital equipment" vs. Analog?

A: As others said, its intended to separate equipment to minimize line noise in the system.

Q: 3. Will this station power a haze machine of 188W 1.5A 250V or 1120W 8.1A 250V ?

A: With no DC input it will not work

Q: 4. I get the impression that this unit is inferior to the standard PST-8. Will plugging in analogue devices into the digital outlets produce worse results? Are the digital outlets weaker in some way to the analogue outlets?

A: No, it will not produce worst results. Both the digital and analog labeled outlets would support either type of device.

Q: 5. Does it matter if I use the digital outlets with analog equipment or vice versa? Are they all the same in power conditioning or is there a difference??

A: You can plug them into either but that defeats the purpose of using something like the Furman PST-8. For the best results, we recommend using Digital equipment with the digital outlets and analog equipment with the analog outlets.

Q: 6. Are all 8 outlets surge protected? The doc for the pst-8 says that all 8 outlets are filtered and surge protected but the document for the 8d says that 4 are linear and 4 digital without mentioning surge protection.

A: As per the manufacture all 8 outlets are filtered and surge protected.

Q: 7. Can I plug a ups unit into this 8 outlet Furman? i heard that you can only plug ups into a 2 outlet unit?

A: According to the UPS manufacturer APC, UPS should always be plugged into the wall directly.

Q: 8. Does it come with 3 pin xlr male and female for the amaran 200x ? Thank you for the answer :)

A: Yes, the Aputure 2-Bay Battery Power Station (V-Mount) comes with a 3-pin female to 3 pin male cable and a 3-pin female to 5 pin adapter.

Q: 9. Will this also charge batteries?

A: No, you would not be able to charge the batteries with this Aputure 2-Bay Battery Power Station (V-Mount) BH #APAAKS2BPSV • MFR #APD0170A3B.

Q: 10. Does this come with a C Stand Clamp?

A: Although a clamp is not included, the Impact CC-128 Double Super Clamp, BH # IMCC128 can hold the 2 Bay Battery Power Station from the top strap. https://bhpho.to/3zqLhEr