Enjoy professional quality sound reproduction with the LD Systems MON 8 A G3, a compact, powered stage monitor that can double as a main PA speaker, well suited for bands, performers, DJs, and singer-songwriters. The MON 8 A G3 delivers a powerful and precise sound, thanks to the 300W RMS (1200W peak) Class-D amplifier that powers the 8" woofer and 1" high-frequency driver. The drivers are arranged in a coaxial design for true point-source performance and provide a frequency response of 68 Hz to 18 kHz with a peak SPL of 121 dB.

The rugged enclosure is made from birch plywood and features a resistant polyurea coating. The side of the speaker features two combo XLR-1/4" inputs and XLR-thru outputs, as well as two powerCON power connectors for daisy-chaining to other monitors. The second generation DynX DSP provides four application presets, a 3-band EQ, tunable notch filter, and an alignment delay. The other side of the speaker features a 35mm pole socket for raising the speaker on a stand to be used as a main PA. The MON 8 A G3 ships with a powerCON power cord.

Compact High-Performance Stage Monitor    Class-D Power Amp: 300W RMS / 1200W Peak    Coaxial Design: 1" Titanium HF Driver    8" Woofer with 2.5" Voice Coil    CD Horn with 50 x 90° Dispersion    DynX DSP with 3-Band EQ, Filter, Delay    Four Application Presets    Two Combo XLR-1/4" Inputs + XLR Thru    powerCON Power Input + 3.5mm Pole Socket    Includes Power Cord

• Compact high-performance stage monitor with top-of-the-range technologies
• Class-D power amplifier with 300W RMS / 1200 W peak and 121 dB max. SPL
• Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
• 8" woofer with 2.5" voice coil
• Optimized, practical radiation pattern due to 50° x 90° CD horn
• DynX DSP (Gen.2) for distortion-free sound even at maximum volume
• 3-band EQ, notch filter, 4 application presets and delay function
• PowerCON-compatible loop-through professional power connection
• 35mm speaker stand flange for FOH applications
• Durable polyurea coating and heavy-duty front grille

The highly efficient Class-D power amp delivers 300W RMS. The peak power of 1200W, which can be called up at short notice, guarantees a dynamic, assertive sound image.

The next monitor can be supplied with power via a second powerCON compatible connection. Thanks to the two XLR outputs, you can also daisy-chain the audio signal to a neighboring stage monitor.

Heavy-duty birch plywood

• The enclosures are made of heavy-duty 15mm birch plywood and coated with durable polyurea. Thus, they reliably withstand many years of hard use on the road

Steel front grille

• The extra-strong, torsion-resistant steel grilles effectively protect the speakers

Two die-cast aluminum handles

• The two cast aluminum handles, homogeneously integrated into the overall appearance, enable the best possible handling onstage

Recessed connections

• The connections and controllers are recessed in steel trays and are thus optimally protected against damage

Noiseless heat sink

• An elegantly designed heat sink on the back of the monitor provides fanless and thus noiseless cooling of the power electronics

PRESET: Selection of the loudspeaker preset

• FULLRANGE
• FLAT
• MONITOR
• MON HPF

3-Band EQ

• HIGH EQ Setting the treble frequencies from -10 dB to +10 dB
• MID EQ Adjusting the center frequencies from -10 dB to +10 dB
• LOW EQ Adjusting the bass frequencies from -10 dB to +10 dB

Notch EQ

• NOTCH GAIN Narrow band reduction of a feedback frequency 0 to -12 dB
• NOTCH FREQ Setting the feedback frequency from 500 Hz to 10 kHz

Alignment Delay

• DELAY Time delay of the audio signal in 0.1m steps up to 10m (0m = OFF, display in meters and feet)

Related Questions and Answers

Q: 1. Would this work for carrying my Canon C200 (without the handle) and with 24-105L lens?

A: Cotton Carrier CCS G3 Harness-1 (Gray) BH #CO686GREY will work for carrying the Canon C200 (without the handle) and with Canon 24-105 f/4 L lens.

Q: 2. Does this monitor have a VESA mount? We want to install it on a wall.

A: Yes, the Samsung Odyssey G3 LF24G35TFWNXZA 24" 16:9 144 Hz VA Gaming Monitor does support a 100mm x 100mm VESA mount pattern.

Q: 3. Will this harness hold a Canon 5DMarkIII camera with a 300mm f/2.8 lens plus 1.4x converter?

A: While I don't have a 5DMarkill camera I do use it with my camera that has a 300MM lens with no problem

Q: 4. Can it support a Nikon180-600mm f/5.6-6.3 VR Lens on a Nikon Z 9 camera body?

A: Yes, the Cotton Carrier CCS G3 Harness-1 can absolutely support the Nikon180-600mm f/5.6-6.3 VR Lens on a Nikon Z 9 camera body.

Q: 5. I use a 400mm L as my walk around lens. Is it better to use the lens mount in the holster so the camera and lens don't separate or is the camera mount enough?

A: When using the Cotton Carrier CCS G3 Harness-2 , it is good to start off mounting the camera to see if one comfortable that way. Then try the lens mount.

Q: 6. Is there a mirror flip option for using in a teleprompter?

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have a mirror flip option at this time.

Q: 7. Can this fixture control individual cells?

A: No, the Creamsource SpaceX RBGAW Color LED Light, 1200W does not allow for control of the individual cells.

Q: 8. I am 6'8" and wondering about positioning and length of the vest and the comfort whether it should ride higher or lower?

A: The most comfortable way to use the Cotton Carrier CCS G3 Harness-1 (Gray) would depend on your specific body proportions and your personal taste.

Q: 9. Will this system work with a camera with a battery grip?

A: Yes, the Cotton Carrier CCS G3 Harness-1 (Gray) will work with a camera with an attached battery grip.

Q: 10. What is the maximum torso adjustment? (Chest size?)

A: There is not a max and min torso adjustment size, but for the waist, it is 26" to 57".