With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Shoulder Rig for Sony BURANO    VCT Pro Baseplate, Side Rails    Top Plate, Tactical Handle    Z-Finder LCD Viewfinder

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. What's in the box?

A: This kit includes the VCT Pro Baseplate, FS7 Trigger Grip, LANC Extension Cable and Axis Mini for FS7.

Q: 2. What viewfinders can you use with the Axis Mini EVF Mount?

A: The Zacuto Axis Mini EVF mount is designed to work with Zacuto EVF models like https://bhpho.to/396pLfw

Q: 3. How sturdy is the mount? Are you able to firmly press it against your eye for stabilization?

A: While the Zacuto Sony FX6 Z-Finder is not designed for stabilization purposes, you can press the Zacuto Sony FX6 Z-Finder eyepiece against your eye when hand-holding the Sony FX6 Full-Frame Cinema Camera to assist you in stabilizing and reducing camera movement.

Q: 4. Will Finder work using Vocas LCD Monitor Support kit for FX 6 ?

A: No, We recommend using the Zacuto Z-Finder Shoulder Mounting Kit for Sony FX6. Zacuto Z-Finder Shoulder Mounting Kit for Sony FX6 BH #ZAZSXFK https://bhpho.to/3R7Pl5J

Q: 5. Can this be used comfortably against the eye on a shoulder mount position?

A: Yes, the Zacuto Sony FX6 Z-Finder can be positioned for work with on shoulder cameras.

Q: 6. Does this unit come with an extension cable to plug the grip into the camera?

A: yes the grip extender contains the appropriate extension cable

Q: 7. Is this eyepiece more prone to screen burning (if left facing the sun) than the Sony FX9 eyepiece? Does it have any kind of IR filtering? I heard the shorter the finder, the more dangerous it is to burn the screen, sometimes in only a few seconds.

A: No, the following unit does not offer IR filtering. It is highly recommended to use the enclosed lens cap to block light from entering your Z-Finder when not in use.

Q: 8. Can you attach the Zacuto Kameleon Pro directly with this rig? If not, what extra accessory do I need?

A: The accessory needed to connect a Zacuto Kameleon PRO is an EVF mount, Zacuto made one for this case, you can search it on the website, item code: ZAZMAEM

Q: 9. does it include 15mm rods?

A: yes this does include the 15mm rods. Zacuto VCT Pro Baseplate 2 x 6.5" 15mm Rods 1/4"-20 Camera Screw 3/8"-16 Camera Screw Limited Lifetime Warranty Zacuto Sony FX9 Dual Trigger Grips Limited Lifetime Warranty Zacuto Axis Mini for Sony FX9 Zacuto Axis Mini EVF Mount Zacuto Sony FS7 & FX9 Top Plate Zacuto Sony FX9 LCD Axis Adapter Limited Lifetime Warranty Zacuto LANC Extension Cable (13.8")

Q: 10. Can this be used with the Canon C300 MK II by any chance?

A: No, the Zacuto C300 Mark III & C500 Mark II Recoil Pro is not compatible with the Canon C300 MK II.