Wireless Router Input Or Output

Rdl Ds-tprx3a 3-input Format-a Source Selector (stainless)

Product Code: ga16942
Availability: In Stock

$825.60 $1,007.23

Qty

2 reviews Write a review

Description
Reviews (2)

The stainless DS-TPRX3A 3-Input Format-A Source Selector from RDL allows you to select between 3 audio different audio sources, and provides a balanced line-level output via detachable terminal block. Only one source can be selected at a time, and selecting a new source defeats the other sources. An LED indicator shows which of its 3 inputs is selected at any time. The unit requires 24 VDC power that can be supplied through an optional power supply for through its terminal block.

3-Input Selector 1 Button Per Input LED Input Indicator Line Level Balanced Output

Parameters
Input	RDL Format A
Input Connector	RJ45
Format	Format-A Signal Pairs Used (3): A, B, C
Switches	Front-Panel Switches: 3x Momentary pushbuttons (1 per input)
Indicators	Front-Panel Indicators: 3x Select channel
Output	150 Ω, balanced
Output Connection	Detachable terminal block Format A Output: RJ45 (Loop-Through)
Output Level	+4 dBu Line level, nominal
Frequency Response	10 Hz to 20 kHz (± 0.5 dB)
THD + N	< 0.005% (1 kHz); <0.05% (20 Hz to 20 kHz)
Noise	Noise Below +4 dBu: <-85 dB
Attenuation	Off Attenuation: <90 dB (1 kHz); < 70 dB (20 Hz to 20 kHz)
Headroom	Headroom Above +4 dBu: >18 dB
CMRR	>80 dB (50 to 150 Hz)
Power Connectors	Detachable Terminal Block RJ45
Operating Temperature	32 to 131°F (0 to 55°C)
Power Requirements	24 VDC @ 45 mA plus connected loads
Dimensions	4.1 x 1 x 1.7" (10.4 x 2.5 x 4.4 cm)
Packaging Info
Package Weight	0.385 lb
Box Dimensions (LxWxH)	4.625 x 3.625 x 2.125"

Remote Selection from 3 Sources that Correspond to 3 Format-A Pairs

Single-Button Selection for Each Source

LED Indication

Line-Level Balanced Output on Detachable Terminal Block

Display is Bright During Adjustment

Display Dims After Adjustment

Remote Powering through Twisted Pair Cable

Fused Local Power Feeds all Connected Modules

Local Power Input on Terminal Block

Active Balanced Circuitry

All-Metal Construction

Related Questions and Answers

Q: 1. Will it go along well with Negative Supply Basic Film Carrier 120? Will carrier "snap-in" this?

A: Yes, the Negative Supply Light Source Mini is compatible with the Negative Supply Basic Film Carrier 120 (B&H # NEBFC120).

Q: 2. Can one of the HDMI outputs be connected to a video capture card for live streaming?

A: Yes.

Q: 3. have seamless switching?

A: Yes. So far we have had no problems. No pixelation or transition issues and no noise or distortion in the audio throughput. Very pleased with the unit.

Q: 4. What size wire plugs into the block in the rear? I used 22 AWG mic cable (black, red, stranded copper shield), is that correct?

A: Yes. 22 gauge is the typical size for line level audio, which is not a high level signal. 22 gauge is correct.

Q: 5. Does scanner do JPEG or TIFF scans?

A: Yes. Using Epson Scan 2 (the scanner's scan software via Windows/Mac), you are able to set Image Format settings. Available formats include: BITMAP, JPEG, PNG, TIFF, Multi-page TIFF, PDF, Searchable PDF.

Q: 6. Is this safe to connect to from multiple pre-amped sources? Or will the circuit between preamps close when it switches and fry one of them?

A: This is safe to use when you need to connect and switch from multiple line level audio sources to one audio line level input on a playback device only. Please note this is not intended for use with any audio sources carrying power intended for speakers.

Q: 7. Seamless switching?

A: We're afraid not. This is not a seamless switcher.

Q: 8. Is this RDL EZ-MPA2 microphone preamp good for voice over only recording?

A: The EZ-MPA2 is ideal for adding microphone inputs to mixers and amplifiers with line inputs, and it can be used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems. -------------------This product is not designed or recommended for voice-over or other vocal recording projects.

Q: 9. Does this light come with a stage pin power connection option?

A: The ETC Source Four PARNel stage pin connection model is no longer available.

Q: 10. Is this model made in USA or China?

A: The Whirlwind SELECTOR is made in the USA.