Underwater Camera Female Diving

Octamas Gear Swiss Cage Advanced Power I/o Set For Red V-raptor

Product Code: ga169429
Availability: In Stock

$8,749.50 $11,986.82

Qty

5 reviews Write a review

Description
Reviews (5)

The SWISS Cage Advanced Power I/O Set for RED V-RAPTOR from OCTAMAS gear contains all recommended accessories for professional rigging, including power distribution. The SWISS cage universe follows industry norms, allowing advanced and complex setups and switching and sharing vital components between camera systems.

For Pro Rigging & Power Distribution LWS, ARRI & Other Industry Standards Top/Bottom Interface Plates Dovetails, Reducers, Cables & Much More

Parameters
Support Type	Cage, Handheld Support, Rod Support System
Grip Type	Topside Handgrip
Camera Compatibility	RED V-RAPTOR
Mounting
Rod Standard	15 mm LWS / 60 mm Spacing
Battery Plate Type	No
Accessory Mounting	Multiple ARRI Anti-Twist 3/8"-16 Female Thread Multiple 3/8"-16 Female Thread Multiple 1/4"-20 Female Thread
Camera Mounting	1/4"-20 Male Screw, 3/8"-16 Male Screw
Tripod Mounting	1/4"-20 Female Thread, 3/8"-16 Female Thread, ARRI Dovetail
Rod Ports	2x 19 mm Rod Port, 4x 15 mm Rod Port
Shoe Mounting	No
Rosettes	No
General
Materials	Aluminum (7075)
Dimensions	3.9 x 5 x 1.1" / 98 x 127 x 27 mm (SC Top Interface Plate) 3.1 x 2.7 x 0.4" / 80 x 68 x 10 mm (SC Dovetail Plate 80) 4.1 x 1.5 x 1" / 104 x 38 x 25 mm (SC 15mm Rod Mount Interface) 5.9 x 1.9 x 2.6" / 150 x 48 x 65 mm (Top Handle Pro) 5 x 3.9 x 1" / 127 x 98 x 26 mm (SC Bottom Interface Plate Power) 5.1 x 3.9 x 1.3" / 130 mm (SC 15mm Interface Bridge Plate) 5.5 x 2.7 x 0.4" / 140 x 68 x 10 mm (SC Dovetail Plate 140) 1.1 x 2.4 x 0.8" / 29 x 60 x 21 mm (Lens Mount Adapter Support Bracket) 2.4 x 1.8 x 0.8" / 60 x 45 x 20 mm (19mm Rod Mount) 2.4 x 1.2 x 1.3" / 60 x 30 x 34 mm (19mm Rod Mount 90°) 0.7 x 0.7 x 0.8" / 19 x 19 x 21 mm (19mm to 15mm Reducer) 2 x 0.9 x 0.4" / 52 x 23 x 10 mm (SC Mounting Wings Short Left/Right Pair) 4.1 x 1.2 x 1" / 105 x 30 x 25 mm (Mounting Cheese Stick) 2.4 x 3 x 0.7" / 61 x 77 x 18 mm (Mounting Cheese Plate 1)
Weight	7.1 oz / 200 g (SC Top Interface Plate) 3.5 oz / 100 g (SC Dovetail Plate 80) 3.9 oz / 110 g (SC 15mm Rod Mount Interface) 7.1 oz / 200 g (Top Handle Pro) 11.6 oz / 330 g (SC Bottom Interface Plate Power I/O) 11.8 oz / 335 g (SC 15mm Interface Bridge Plate) 6.2 oz / 175 g (SC Dovetail Plate 140) 0.3 oz / 9 g (Lens Mount Adapter Support Bracket) 1.8 oz / 50 g (19mm Rod Mount) 1.9 oz / 55 g (19mm Rod Mount 90°) 0.5 oz / 15 g (19mm to 15mm Reducer) 1.2 oz / 35 g (SC Mounting Wings Short Left/Right Pair) 1.6 oz / 45 g (Mounting Cheese Stick) 1.6 oz / 45 g (Mounting Cheese Plate 1)
Interface	1x D-Tap 1x Fischer 3-Pin (12 VDC, Trigger) 1x LEMO 2-Pin (Power Input) 2x LEMO 2-Pin 0B (AUX, Power) 1x LEMO 4-Pin 00B (RED Control) 1x LEMO 5-Pin 0B (Timecode, Genlock) 2x LEMO 9-Pin 0B (RED EXT Input/Output)

SWISS cage Top Interface Plate for RED V-RAPTOR
SWISS cage 3.1" Dovetail Plate
SWISS cage 15mm Rod Mount Interface
Top Handle Pro
SWISS cage Bottom Interface Plate Power I/O for RED V-RAPTOR/KOMODO/KOMODO-X
4" 9-pin 0B RED EXT to 9-pin 0B RED EXT Cable
12" D-Tap to 2-pin OB AUX/PWR Cable
SWISS cage 15mm Interface Bridge Plate
2 x 5.5" SWISS cage Dovetail Plate
Lens Mount Adapter Support Bracket for V-RAPTOR/KOMODO/KOMODO-X/DSLM
19mm Rod Mount
19mm Rod Mount 90°
2 x 19 to 15mm Reducer
SWISS cage Mounting Wings Short Left/Right Pair
Mounting Cheese Stick
Mounting Cheese Plate I

Related Questions and Answers

Q: 1. Would this work on komodo as well?

A: The 8Sinn Lens Adapter Support for RF to PL Mount Evolution and RED V-RAPTOR would not be compatible with the RED Komodo. The compatible adapter would be the 8Sinn Lens Adapter Support for Evolution RF to PL Mount, B&H # 8SLASEVRFPL.

Q: 2. Will it fit a Nikon Z6 camera with the Nikon NIKKOR Z 180-600mm f/5.6-6.3 VR Lens attached?

A: You will not be able to fit both the lens and camera attached. But you will be able to fit them unattached.

Q: 3. Would this plate be compatible with the "SmallRig Lightweight Magnesium Alloy Baseplate with Dual 15mm LWS Rod Clamp"?

A: Yes, the Manfrotto style bottom of the SmallRig Arca-Swiss/Manfrotto-Type Mounting Plate Set would be compatible with the SmallRig Lightweight Magnesium Alloy Baseplate with Dual 15mm LWS Rod Clamp, BH #SM3067.

Q: 4. This bag is 1/2" too long to be considered a personal bag on an airline-is it flexible enough to be squeezed under a plane seat?

A: The exterior of the Manfrotto Advanced Gear M III 17L Backpack is 18.5 x 11.8 x 7.3 inches which is well under the 45 linear inch range that most airlines use.

Q: 5. As of January 2022 only the RED CFExpress card is "approved". Does this mean that if I put in another card the camera won't accept it? Or does it just mean that RED hasn't approved it to be fast enough to capture 8K120 Raw? Two very different things and just wondering if anyone has tried any other media. Thanks!

A: The RED PRO CFexpress Type B cards are RED approved, meaning they have been tested and approved by RED. Third-party media cards are compatible with the camera system but are not officially approved by RED. As long as the read and write speeds of the third party media meet or exceed those of the RED PRO CFexpress Type B cards, there should be no issue using third party media cards. Just note that damage and warranty will not be covered by RED.

Q: 6. will this 4234 work with a 502 Fluid video head with a 504PLONG plate, and a XPRO Geared Three-way head with a 200PL plate?

A: You can screw the SmallRig Arca-Swiss/Manfrotto-Type Mounting Plate Set onto the quick-release plates that you already have (in the same place where you screw a camera). However, if you want to replace the quick-release plate and use the SmallRig directly on your 502 fluid head and/or XPro Geared head, then it won't work. It is not compatible.

Q: 7. Will this camera support wireless timecode & genlock? With Atomos Ultrasync and Tentacle Sync?

A: With the RED DIGITAL CINEMA V-RAPTOR 8K S35 Sensor Camera (B&H# REVRPTRS35) all current indications are that it will need a wired input for genlock and timecode. As always, if you use certain Atomos external recorders with compatible Atomos UltraSync products then timecode could be wireless except for the connection to the recorder from the camera. The same applies if using Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 (Dual Set) (B&H# TETE2MK2).

Q: 8. Will Core Nano batteries fit? https://www.bhphotovideo.com/c/product/1333711-REG/core_swx_core_n98s_6_6ah_lithium_ion_battery.html

A: Yes. The RED DIGITAL CINEMA V-RAPTOR ST 8K VV + 6K S35 Dual-Format DSMC3 Camera, will work with V-Mount Core Nano batteries. BH #CONANOV98 is a great option. https://bhpho.to/3zhgita

Q: 9. What file size in 23.98fps at 6k super 35 crop?

A: On the RED DIGITAL CINEMA V-RAPTOR 8K VV + 6K S35 Dual-Format DSMC3 Camera (Canon RF, Black) capturing 23.98fps at 6K 17:9 - 6144x3240 RAW HQ, you can expect: 202.20 MB/s 12.02 GB per minute 721.41 GB per hour Capturing 23.98fps at 6K 17:9 - 6144x3240 RAW MQ, you can expect: 164.40 MB/s 9.81 GB per minute 588.51 GB per hour Capturing 23.98fps at 6K 17:9 - 6144x3240 RAW LQ, you can expect: 95.66 MB/s 5.60 GB per minute 336.30 GB per hour

Q: 10. Can we record on non red cfxpress card ?

A: We cannot guarantee compatibility with non-RED media. However, the RED CFexpress cards are the only ones certified by RED for use in their cameras.

anyonymous	08/09/2024
The chain design is really easy to use. Great product 5

anyonymous	27/07/2024
I already own other two background paper drive sets for more than two years and they are still working well. 5

Gyt the Wit	17/07/2024
When my old drive set (many years old) broke this replacement was fantastic. Striaght away it was easy to install and works like a dream. ... 5

ANIESTE	01/06/2024
Whats to say. Their background drivers and they do what their supposed to do! I use three different color backgrounds for product shots and the ease of changing the backgrounds is simplified with this product. 5

Pixel-Magic Photography	28/04/2024
You need Bogen/Manfrotto hooks (brackets) with this. Choose 3 roll or 6 roll brackets. The brackets can mount on ceiling or on wall -ceiling is probably best (better separation and height for all rolls). Long paper cores may possibly sag, so you can use PVC 2 diameter or aluminum tubing. It is simple to setup and works great. With this system you can change backgrounds really fast. Best overall solution for permanent installs pricewise and for changing speed. 5