Monitor your surroundings with the Y32 5MP Outdoor Analog HD Mini Bullet Camera from ACTi. This unit uses a 1/2.7" progressive scan CMOS image sensor to transmit 2592 x 1944 resolution video at up to 20 fps. An IR LED provides up to 98' of night vision. The camera's 2.8mm fixed lens delivers a 102.2° horizontal field of view. HD-TVI, HD-CVI, AHD, and CVBS signal outputs are supported.

This camera is housed in an IP67-rated enclosure that is suitable for outdoor use.

2592 x 1944 Resolution at 20 fps    Night Vision up to 98'    2.8mm Fixed Lens    102.2° Horizontal Field of View    Supports HD-TVI, HD-CVI, AHD & CVBS    BNC Connection    IP67 Rated for Outdoor Use

Supports HD-TVI, HD-CVI, AHD, and CVBS signals

IR cut filter for day and night switching

130 dB wide dynamic range, white balance, digital noise reduction, and flip image orientation

4kV surge protection

Related Questions and Answers

Q: 1. BMD Teranex Mini HDMI to SDI 12G Converter - Can this device Embed audio only without accompanying video signal?

A: yes

Q: 2. Would this allow the SDI output from the Blackmagic talkback converter to interface over XLR to other intercom systems?

A: You can extract the Talkback audio in SDI 15/16 with this converter.

Q: 3. I am wanting to convert a 4K video feed from a ATEM Television Studio Pro 4K to 1080p HDMI out. I am trying to connect to a Epiphan Webcaster X2. Will this Teranex be able to convert the 4K SDI out to 1080p HDMI?

A: That is not possible as this does not do scaling.

Q: 4. Can someone recommend a piece of hardware to duplicate xlr audio ? I have two inputs and would like to have 8 outputs to run into these audio injectors since they don't have xlr loop through.

A: You could look at the Behringer DS2800 2-Input/8-Output Distribution Splitter for Commercial Applications, BH #BEDS2800. https://bhpho.to/31kTDhj

Q: 5. Can I connect my atem to this and send vga out to existing projector signal ?

A: This device will give you an analog composite or an RGB component output. We use this converter to feed the component input of our projector and it works great. If you only have a VGA input on your projector, you will need to convert the component signal to VGA before you can use it on your projector.

Q: 6. Can I use this to distribute the Program Output from BMD Atem 2 M/E Production to 3 BMD Studio Camera HD for Tally and Talkback?

A: Yes, you can.

Q: 7. What SDi signal inputs will this work with? 1920x1080i 59.94?

A: The following HD Video Standards will work: 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080i50, 1080i59.94, 1080i60 1920x1080i 59.94 is compatible.

Q: 8. What is the bit depth of the S-video to SDI A/D conversion?

A: 10-bit.

Q: 9. Will this convert a 35mm film camera output (analog) to SDI signal (Digital) ?

A: No, this is a converter to go from SDI to analog. Here is a converter that will convert from analog to SDI: https://www.bhphotovideo.com/c/product/558906-REG/Blackmagic_Design_CONVMAAS_Mini_Converter_Analog_to.html?sts=pi&pim=Y

Q: 10. Does the BM Mini Converter SDI to Analog pass close captioning or strip it from the signal?

A: The digital closed captioning will be removed. If there is captioning in the active video in the SDI, it will remain in the active video of the analog.