Aim confidently with this Tactical Rifle Blue Laser from Osprey Global. Unlike red and green lasers that are limited by air temperatures, the 450nm blue laser will work in temperatures from -4°F to 140°F. The laser is controlled by a push button, but also comes with a remote pressure switch so it can be operated without moving your hands from firing position. Made of anodized 6061-T6 aluminum, the laser fits on Picatinny rails and will run up to 7 hours on a single CR123A battery.

Class 3A 450nm Aiming Laser    Onboard & Remote Pressure Switches    Windage & Elevation Adjustment Screws    Fits Picatinny Mounts    Works from -4°F to 140°F    Uses One CR123A Battery    7 Hours Runtime

• Class 3A 450nm blue laser for use in wider temperature range than red or green lasers
• Onboard switch or included remote pressure switch
• Mounts on Picatinny rails
• Windage and elevation adjustment screws for zeroing
• Anodized 6061-T6 aluminum housing

Related Questions and Answers

Q: 1. Radio Triggering Range of up to 328' - To use this item, does one need a single Cactus V5 transceiver? I noticed you sell the transceivers either singly or in pairs, and the description suggests this item can trigger the transceiver itself.

A: It depends on what your goal is as well as existing equipment. The laser has a sender built in, so it can activate the shutter and on-camera flash with a single transciever. If you want to use remote flash (most aoolications like water drops, bursting ballons etc.) require a remote flash - then you either need a second transceiver or a camera/flash system that controls a slave flash. Hope this helps

Q: 2. Will this fit the Lumix G7?

A: Yes it will. This is a Universal Cage designed for cameras similar in size to the G7. It will work with the G7.

Q: 3. Are interior dimensions provided were measured when the pouch lays flat, or is this diameter of the round pouch?

A: The Zing Designs STB1 Extra Large Stuff Pouch (Black with Blue Trim) interior dimensions of 8 x 6 inches is with the pouch laying flat on a table.

Q: 4. How precisely do you have to line up the laser? We've tried a similar product but it's so picky that even a strong wind can push it far enough out of alignment that the camera will not trigger.

A: The subject will need to be precisely aligned with the trigger.

Q: 5. Will this work with a Nikon Z6?

A: This is a universal cage which should work with most Mirrorless cameras. Since it fits cameras like the A7 it should work fine with the Z6.

Q: 6. Does this fit a Lumix S5?

A: The form factor of the Panasonic Lumix GH4 is very different of the S5 body, so the YELANGU C500 Camera Cage with Matte Box and Follow Focus will not be able to fit the Panasonic Lumix S5.

Q: 7. will it work on canon 6d mark ii

A: This rig is for mirrorless cameras. The 6D Mark II is too big.

Q: 8. The description mentions certain other triggers Will these trip Pocket Wizard Plus-III radios?

A: How this can work with other radio systems like Pocketwizard Plus III is the Cactus sensor needs to be attached via a 3.5 to 3.5 cord to the Plus III. When the Cactus sensor is set off it sets off the hard wired Pocketwizard which then can set off other Pocketwizards.

Q: 9. What kind of wooden hand grips will fit this cage?

A: If you were to add a Low-Profile NATO Rail (2") to the side of this cage, BH #SMLPNR50MM, you could then use the SmallRig Wooden Side Handle with NATO Clamp, BH #SM2187B. NATO Rail - https://bhpho.to/2TKeeIC Nato Side Handle - https://bhpho.to/2W5XFIG

Q: 10. will a sony alpha fit in it?

A: The answer is YES