3Rd Wave Warranty

Atlona 2-year Extended Warranty For At-wave-101

Product Code: ga169535
Availability: In Stock

$674.94 $931.42

Qty

10 reviews Write a review

Description
Reviews (10)

Stay protected with the 2-Year Extended Warranty for AT-WAVE-101 from Atlona. Providing two years of coverage, this manufacturer extended warranty combines with the original product warranty for a total of five years of coverage. Applying to defects in materials and craftsmanship, this extended warranty includes free advanced replacement for covered models.

Please note that this plan must be purchased at the same time as the applicable unit.

For AT-WAVE-101 Manufacturer Extended Warranty Covers Materials & Workmanship Advanced Replacement

Parameters
Length	2-Year
Type	Extended
Start Date	End of Manufacturer Warranty
Scope of Coverage	Parts & Labor
Included Support	Advance Exchange
Region	International

Related Questions and Answers

Q: 1. how are stated dimensions possible? Accommodates Devices measuring up to 5.3 x 3.5 x 0.6" (135 x 89 x 15 mm) Dimensions 5.3 x 3.5 x 1.2" (135 x 89 x 31 mm). This is saying it accommodates something that is just as long as the largest external dimension. Case Logic web site specs have the same problem.

A: The case measurements are not a absolute. The cloth can be flexed some.

Q: 2. Is a tripod included in this set?

A: no the tripod is NOT included with this set

Q: 3. Is this the track and the legs for the tripod?

A: It is not. This product is just for the dolly with track wheels. The Tripod and Track are not included.

Q: 4. What parts do I need to install an isolator or a cheese plate instead of the 100mm bowl?

A: I don't believe ProAim makes a bowl head to flat base adapter but you can use a 100mm or 75mm ball to flat base adapter directly with an isolator. An example would be: - Kessler Crane 100mm Ball Kit for KillShock Inversion Kit - Kessler Crane KillShock Inversion Mounting Kit https://www.bhphotovideo.com/c/product/1430593-REG/kessler_crane_mg1069_100mm_ball_kit_for.html https://www.bhphotovideo.com/c/product/1430592-REG/kessler_crane_mg1068_killshock_inversion_mounting_kit.html

Q: 5. Can I attach a DJI gimbal on it?

A: Yes. The following unit will adapt to several gimbal systems.

Q: 6. i just purchased the Godox QT1200IIIM Flash Head. Will this work with this unit ? thanks

A: The Photogenic ION would not be suitable for the Godox QT1200IIIM.

Q: 7. How to install a FREEFLY Toad (Male Adapter), what parts are needed?

A: You will need a 75mm or 100mm Ball to Flat Base Adapter. Once you attach the ball to flat base adapter to the end of the ProAim Wave-2 Jib, you will be able to screw the Toad Adapter onto a 3/8"-16 thread on the end of the ProAim Wave-2 Jib.

Q: 8. Can I use the 7' wave 2 on a manfrotto 546b? 75mm bowl. Is it solid enough?

A: The 546B Tripod System is rated for 22 lb Load Capacity and the Proaim 7' Wave-2 Video Jib/Crane Arm is rated for a Maximum 55 lb Load Capacity. We will have to say the 546B Tripod System would not be appropriate.

Q: 9. Can this photo paper use with Canon dye sub printer?

A: No, the Canon MG-101 Magnetic Photo Paper (4 x 6", 5 Sheets) BH #CA3634C002 is for Inkjet printers.

Q: 10. I have an Sennheiser EW100 G3 Receiver with a frequency range of 516-558MHz. Will this antenna still work?

A: Yes, the Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are compatible for use with the Sennheiser EM 100 G3 Wireless Receiver that operates on the 516 to 558 MHz frequency band.

Gary	02/09/2024
I always keep a lens hood on all my lenses for 2 reasons: 1- decrease the lens glare 2- decrease risk of direct impact to the lens if dropping the lens, walking through branches, etc... protecting the lens tip. I was surprised when I realized that this nice lens did not come automatically with a lens hood! 5

Yasmin	29/07/2024
The Canon ET-101 Lens Hood is a perfect fit for the Canon RF 800mm f/11 IS STM lens. My only criticism: Why is the lens hood an accessory to be purchased separately? I suspect the answer is the added cost. But still, it's a general expectation that a lens hood comes with the lens. 5

Allan	23/07/2024
Shooting wildlife outdoors can be challenging in sunny locations. Additionally, I like to use lens hoods on all of my lenses to protect the objective lens. This purchase was necessary to me. 5

Steve	06/07/2024
Way over priced for a few grams of plastic but it serves the purpose well. I want something to protect the lens front element. 5

Nelson	06/07/2024
An important accessory; wish it came with the lens! 5

James	04/06/2024
The build quality and fit are excellent. Havent had a chance to use it in action with the lens, but Im sure it will function just as well as anoy other Canon lens hood 5

Steven	29/05/2024
This is the best lens hood I own! It is well made and has a feature that locks it to the lens, which makes it quite secure. It was backordered for many months, but worth the wait! 5

John M	08/05/2024
First, I bought the competitor's hood, JJC. It self destructed with minimal use. This is an example of You gets what you pays for. No fighting to get it to spin on and off. Easy peasy. 5

Dick	13/04/2024
With the Canon quarter twist and lock, goes on and off easy. Is also reversible to get it out of the way. Since it does not use the lens threads you can use the lens cap or filters with out interference from the hood. Made of plastic (hope it 's strong), highly over priced, should come with the lens! 5