In blue, this is a 12' Cat6a Snagless Unshielded (UTP) Slim Ethernet Network Patch Cable from C2G. Supporting Ethernet speeds up to 10 Gb/s, this network cable is suitable for high density applications such as in large conference rooms and data centers. The cable features a 28 AWG conductor and has RJ45 male connectors with gold-plated contacts. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Other colors are optionally available for color-coding your installations.

28 AWG Conductor    RJ45 Connectors; Gold-Plated Contacts    Supports Ethernet Speeds up to 10 Gb/s    Suitable for Large Data Centers & More

Related Questions and Answers

Q: 1. I have about eight 3rd party cables with the N3 connector and not ONE of them connect snugly enough to be reliable. How is this one?

A: No. The following cable fail after alot of plug and playing. Please review the following that offers a barrel lock PocketWizard CM-N3-ACC Canon 3' Remote Camera Cable BH #POCMNACC • MFR #12402 https://bhpho.to/3QlEzYM

Q: 2. Is this cable regulated?

A: The Output Voltage on the Kondor Blue D-Tap To Sony L Series Dummy Battery NPF Cable is 8V (Regulated).

Q: 3. will this work with the tilta bmpcc 4k/6k half cage?

A: This USB cable adapter will work well with a full or half cage from Tilta for the Blackmagic Pocket 4K or Pocket 6K.

Q: 4. Will this work with the FX30 too?

A: Yes the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable will work with the FX30.

Q: 5. Any Sony camera user out there NOT have the timecode signal bleeding issue?

A: We are not aware of the timecode signal bleed you are referring to, but if you need assistance with your Tentacle Sync 3.5mm Mini-Jack Microphone Y-Cable (12") please feel free to email us at https://www.bhphotovideo.com/find/contactForm.jsp, call us at 800.606.6969, or use the live chat feature to receive real time assistance.

Q: 6. I have this cable and plugged it into my Sony A74 camera, then attached the Tentacle Sync E Mk2 unit that I used earlier as a slave to accept the master audio timecode signal from my Sound Devices Mix Pre 3 II external audio recorder. So now the Tentacle Sync E Mk2 unit is sending timecode to the camera's left channel. Also I attached a Deity V-Mic D3 Pro to send audio to the camera's right channel and then I recorded a video clip. When I play back the clip on my headphones, I hear audio from both channels, so I'm hearing the loud whir from the timecode signal on the left channel at the same time as the person's voice on the right channel. I would like to find a solution that will allow me to monitor the video/audio take, hearing audio that is synced with the video clip, when I review by playing back the clip in camera. With the Sound Devices Mix Pre 3 II recorder, that high quality .WAV file will be synced later in post. I'm thinking that I would need a pair of headphones with a disabled left channel, so only the right channel is allowed to playback while I review the camera take on set. Can anyone recommend headphones that one can switch off the left channel, or have another solution that will allow a review of the synced audio/video clip on set? Thank you.

A: As you note, the Tentacle Sync 3.5mm Mini-Jack Microphone Y-Cable (12") is sending timecode as audio to the left channel of the camera's audio track. In this case, although rudimentary, the most simple solution would be to only monitor with one side of the headphones, physically removing the side emitting timecode from your ear. There are no suggestions for headphones that allow for disabling audio of one side or the other.

Q: 7. I've read concerns that this cord has issues with certain data rates of 6k BRAW, is there info on what it generation of USB-C it is? Or what data rates it supports?

A: This cable supports 6K BRAW. Tilta does not provide any other specs on this cable. But they have confirmed that it does support 6K Braw recording.

Q: 8. Does this cable work with the r5c?

A: No, We would recommend the C3 cable. N3 would be for Nikon cameras. A good choice is. https://bhpho.to/3Wiclke

Q: 9. There have been concerns that this cord cannot keep up with 6k braw. Do you know if it capable of being used with a 6k pro?

A: Yes, the Tilta 90° USB Type-C Cable for Tilta BMPCC 4K Cage supports 6K BRAW.

Q: 10. Will this cable work with the Sony RX100 vii?

A: Yes, this cable can be used with the RX100 vii.