The Sennheiser AWM UHF Wall Mount Antenna is designed to enhance the wireless performance of your Evolution Wireless Digital microphone system and

can be installed quickly and easily in any room, on a vertical wall or horizontal ceiling surface, on a mic stand, or on a VESA 100 mount.

The AWM UHF can be connected to any stationary Evolution Wireless Digital receiver or EW-D ASA antenna splitter. It features adjustable gain settings of -6, 0, +6, and +12 dB, with a multicolor LED to display the chosen setting. Power is provided through either a BNC or DC jack.

Open Box Products Have a Limited 2-Year Manufacturer Warranty    For Evolution Wireless Digital System    Mounts on Wall or Ceiling    Active Directional Antenna    Adjustable Gain Settings    Power via BNC or DC Jack

• For use with Evolution Wireless Digital microphone systems
• Operates in the UHF I: 470 to 694 MHz frequency range
• Active directional antenna
• Discreet design with fully integrated antenna
• Adjustable gain settings of -6, 0, +6, and +12 dB for different cable length
• Mountable to a wall, a ceiling, a stand (with a 3/8"-16 thread), or a VESA 100 mount
• Power supply either via BNC or DC Jack

Related Questions and Answers

Q: 1. I have a frequency problem ?

A: Please e-mail us: askbh@bandh.com

Q: 2. This antenna suits for the G3 transmitter also?

A: Yes they do, and they are very easy to replace. With the right tools 5 min

Q: 3. Will this antenna work for range G 566-608? And both receiver and transmitter?

A: Yes. The Sennheiser 578854 Antenna can be used with SK 100/300/500 and SK 2000 Bodypack Transmitters from the G2, G3, and G4 series that operate on any frequency band between 558 to 626 MHz.

Q: 4. can i use it in europe , voltage problems maybe?

A: Voltage should not be a problem since the power adapter works on 100-240 volts. However, you need to check if the operating frequency ranges are OK for your region in Europe. That by itself would be the reason to buy in Europe so that you can make sure you are operating within the local law and allowable frequency spectrum.

Q: 5. Will this also work for a G2 EW-100? (the older model)

A: Yes, im fairly sure it will work. I used this part to replace the antenna on a Sennheiser receiver which I am guessing was the same model as yours the first EW100 that took two AA batteries instead of a single 9v. No problems as far as I can recall. Good luck.

Q: 6. Is this easy to replace and does it work on the G2 receiver?

A: This would not be compatible. Sennheiser does not list an available replacement antenna for the G2.

Q: 7. Does this antenna works in any frequency of the G3 transmitter and receiver?

A: Ive had no issues. It works.

Q: 8. Can this microphone be paired with any other receivers for use in field/documentary work?

A: Yes, the Sennheiser SK-XSW-A Bodypack Transmitter that is included with the Sennheiser XSW 1-ME2 UHF Lavalier Microphone Set (A: 548 to 572 MHz) can also be used with the Sennheiser EM-XSW 2 True Diversity Receiver with External Antennas - A: 548 to 572 MHz (B&H # SEEMXSW2A) or the Sennheiser EM-XSW 1 Dual-Channel Stationary Receiver with Internal Antennas - A: 548 to 572 MHz (B&H # SEEMXSW1DU). The actual Sennheiser ME 2-II Omnidirectional Lavalier Microphone with Locking 3.5mm Connector can be used any Sennheiser wireless transmitter that accepts a locking 3.5mm connector as well as wireless transmitters from other manufacturers that use the same type of locking connector and the same internal wiring configuration.

Q: 9. Can the receiver have 2 mics connected to it? Like 1 handheld and 1 lapel mic?

A: No. This receiver can only be used to connect to one transmitter at a time.

Q: 10. Is the rate given for 1 antenna or a pair?

A: The antenna is a single unit, not a pair.