Amplifier With 2 Inputs

Rdl Hd-ra35u 35-watt Remote Mixer Amplifier (usa Power Supply)

Product Code: ga16977
Availability: In Stock

$1,428.75 $2,243.14

Qty

1 reviews Write a review

Description
Reviews (1)

The HD-RA35U 35-Watt Remote Mixer Amplifier from RDL features dual-zoned amplifier outputs and is designed for use in applications requiring background music with paging or music on hold functionality. The unit has 4 audio inputs, including 2 mic- or line-level inputs on terminal blocks and 2 stereo RCA line inputs that are each summed to mono.

The HD-RA35U features 2 mixers. Its Zone 1 mixer provides 35 watts of amplifier output for background music use, while the Zone 2 mixer has 4 watts of output on a 600 Ohm connection for music on hold scenarios. Additionally, a line-level output allows for connectivity to a separate power amplifier.

For Background Music with Paging, MOH 2x Mic, 2x Line-Level Inputs 2x Stereo to Mono 2x Output Power Amplifier Zones Manual or Automatic Ducking Automatic Sleep Mode Made in the USA

Key Specs
Number of Channels	2
Amplifier Power Rating	4 Ohms: 35 W RMS (1% THD) 8 Ohms: 32 W (1% THD)
Audio I/O	2x Block Balanced Mic/Line Input 2x Stereo RCA Unbalanced Input 1x RCA Unbalanced Zone/Amplifier Input 1x RCA Unbalanced Preamp Output 1x Stereo RCA Unbalanced Zone/Line Output
Amplifier
Form Factor/Type	Tabletop
Number of Channels	2
Number of Zones	2
Amplifier Power Rating	4 Ohms: 35 W RMS (1% THD) 8 Ohms: 32 W (1% THD)
Performance
Frequency Response	Mic Input to Line Output: 40 Hz to 25 kHz ±1.5 dB Line Input to Line Output: 20 Hz to 20 kHz ±1 dB (Balanced) 20 Hz to 20 kHz ±0.5 dB (Unbalanced) Amplifier: 50 Hz to 20 kHz ±1 dB
I/O Impedance	MOH Output: 600 Ohms
Input Level	Mic: -9 dBu Maximum -50 dBu / 2.5 mV Minimum (Max Gain) Line: +20 dBu Maximum (Balanced, 1% THD+N) +5 dBV Maximum (Unbalanced, 1% THD+N) +11 dBV Maximum (Unbalanced, with One Input, 1% THD+N) -21 dBu / 70 mV Minimum (Balanced, Max Gain) -15 dBV / 180 mV Minimum (Unbalanced, Max Gain, Both Inputs Driven)
Headroom	MOH Output: +16 dB
Output Level	MOH Output: 0 dBu / 775 mV Nominal RCA Output: -10 dBV / 316 mV Nominal (Unbalanced) Block Output: 0 dBu Nominal (Balanced)
VCA Control	0 to 10 VDC
Noise	Mic/Line Input to Line/Amplified Output: -70 dB (Balanced, Below Compressor Threshold at Max Gain) < -75 dB (Unbalanced, Max Gain)
THD+N	< 0.5% (1 kHz, at Compressor Threshold, Main Output) < 0.1% (Line Output)
CMRR	Mic Input: > 50 dB (50 Hz to 120 Hz) Line Input: > 80 dB (Balanced, 50 Hz to 120 Hz)
Signal Processing
EQ	2-Band: Treble: ±10 dB at 10 kHz Bass: ±9 dB at 100 Hz
Ducking/Muting	Yes
Compressor	Yes
Connectivity
Audio I/O	2x Block Balanced Mic/Line Input 2x Stereo RCA Unbalanced Input 1x RCA Unbalanced Zone/Amplifier Input 1x RCA Unbalanced Preamp Output 1x Stereo RCA Unbalanced Zone/Line Output
Speaker Outputs	2x Block Balanced
Phantom Power	24 VDC, Selectable On/Off per Mic Input
Power
Power Consumption	1 W (Sleep Mode)
Physical
Operating Conditions	32 to 122°F / 0 to 50°C
Dimensions	8.6 x 3.3 x 9.0" / 21.9 x 8.3 x 22.8 cm
Packaging Info
Package Weight	8.1 lb
Box Dimensions (LxWxH)	18.9 x 10.4 x 4.1"

Four audio inputs

Paging input with front-panel volume control

Three inputs with VCA volume control adjusted using optional RDL remote control

Bass and Treble tone controls

Designed for background music with paging and music-on-hold

Manual or automatic (VOX) priority ducking

Balanced inputs and amplified outputs on detachable terminal blocks

Unbalanced inputs and outputs on RCA jacks

Automatic sleep mode for saving energy

Analog Compressor/Limiter for Zone 1

Related Questions and Answers

Q: 1. hello it can be connected to a voltage 220?

A: The QSC GX3 operates at 120V AC. You will need to use a step-down transformer to use it with 220V AC such as the Sevenstar ST-500 Step Up/Step Down Transformer - 500W (B&H # SEST500UD) or Watson Voltage Converter - 500 Watt Max (B&H # WAVCGSD500).

Q: 2. What part number will slave trip this unit?

A: You need to get BH #SPPPFBA405 speedotron Sync cord adapter -converts male household to male phono plug, then get a wein L8 micro slave.

Q: 3. Can we give input to 1 GX3 power amplifier from another GX3 power amplifier?

A: There are no outputs on the GX3 other than speaker outputs which can not be connected to the input of another amplifier. The GX3 outputsare designed to connect only to speaker inputs

Q: 4. what kind of speakers to use with these?

A: This amplifier is designed for commercial installation systems that offer 70 or 100 volt taps.

Q: 5. Does it come with cables?

A: Yes, the SeaSonic Electronics Focus GX 1000-Watt 80+ Gold Power Supply comes with modular power cables.

Q: 6. how do you rack mount this amp?

A: Use a rack shelf.

Q: 7. Is it better to used for lows bass or mids and highs?

A: Frequency Response 20Hz - 20kHz, +0, -1 dB

Q: 8. What is the input power Range of this unit?

A: It is 120 VAC 60Hz only.

Q: 9. What is the AC power range of this unit?

A: It is 120 VAC 60Hz only.

Q: 10. I wish to use this amp with (4) speakers inside a small (1,500 sqft) fun center lobby with 10ft. ceilings. Would someone be able to suggest a good speaker match? Thanx.

A: Thank you for your question. Please give us a call at 800.606.6969 so that we can better assist you in getting the right speakers for your needs.

Alan	19/08/2024
I started charging my NOCO GB70 with the standard USB input to test the charging. That worked to charge partially. I then plugged in the XGC4 to see how the charge continued. Wow, this charged the remaining (to full) charge in a short period of time. Very much faster than the USB. Glad I decided to purchase this charger. I am very happy with the purchase. Highly recommended. 5