Designed to for residential and commercial installations, the WAX628 AX5400 Wireless Dual-Band Access Point from Netgear makes it easy to manage a multitude of smart home and business devices, even in dense environments. By taking advantage of the 160 MHz channels, this Wi-Fi 6 (802.11ax) access point delivers total throughput speeds of up to 5.4 Gb/s over the 5 GHz and 2.4 GHz bands.

Simply connect the WAX628's 2.5G Ethernet port to a PoE+ compatible switch to transfer both data and power over a single cable. Alternatively, you can add a separately purchased 12V DC power adapter. A one Gigabit Ethernet LAN port is available for wired devices such as computers, smart TVs, and game consoles. With the included mount, you can discreetly place the access point on a wall or ceiling, where it may blend in with the environment. Use the Netgear Insight service to configure, manage, and monitor your network.

Wi-Fi 6 (802.11ax)    Up to 5400 Mb/s Throughput    2.4 GHz / 5 GHz (Dual-Band)    1 x 2.5G Ethernet PoE+ Port    1 x Gigabit Ethernet LAN Port    Includes Wall & Ceiling Mount    Up to 8 SSID Support    WPA3 Security    Netgear Insight Management

In addition to WPA3 wireless encryption, you can protect your network by designating up to eight SSIDs, each with its own VLAN control, to separate access privileges between employees, guests, and other users.

A 4-year Netgear Insight subscription is included, allowing you to manage your network locally or remotely through the cloud from anywhere, anytime.

The included 4-year subscription to the Netgear ProSupport service provides you with 24/7 access to tech support experts in addition to a 5-year warranty and next business day device replacement.

Related Questions and Answers

Q: 1. Is this device water resistant/proof? IP rating?

A: The Ubiquiti UAP-AC-M-PRO-US is not IP rated, but it can operate in conditions of up to 95% humidity and has been stated in user testimonials to endure harsh climates and extreme weather.

Q: 2. I want to install a ubiquity mesh ap system that will be attached to a local IP that is radio frequency transmitted internet service. Can I use a Unifi M AP and attach via cat5 to \a switch inside a steel wall building to supply internet service to the inside of the building from the unifi mesh ap?

A: Yes but you should use a separate antenna/receiver to supply the network feed to the switch which would then be routed to feed to your mesh APs.

Q: 3. HiMay i use this AP to cover a campus with 150m x 100m?

A: Good day This AP as cabapabities of creating a mesh system that works really good from my experiece.However your question can't be answered with so little information. Please post an aerial photo or building outline showing the areas to be served and the kinds of users expected in those areas, this can be done at ubnt community forum someone will chime in and assist with suggestion.Also I want to mention this kind of job requiresskills in WiFi, RF and networking. If you don'thave those skills, find a competent consultant or company to assist.Regards

Q: 4. Is this compatible with the netgear ax5400 router?

A: No, the Netgear MS60 is only compatible with Mesh routers/systems such as the Nighthawk MK62.

Q: 5. how are the remote mesh APs powered? since they are connected wirelessly, there's no PoE. Where I need a wireless AP, theres no power, but I could use solar powered battery if there I can use an low voltage adapter to power the mesh AP.

A: A PoE adapter is included. The draw is 9w Max.

Q: 6. Will this work with a Linksys POE switch? I do not have a unifi controller. Do I need one or can I just configure it without one?

A: It can run with a linksys POE switch as long as it has enough power and meets it poe specs. You will need to run the UniFi controller on a computer to set the unit up.

Q: 7. are these devices compatible outside the US?

A: Yes, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point are capable of being used outside of the US.

Q: 8. looking for 2 non wired extenders for my hardwired AC-Pro , will these do?

A: This will need to be at least plugged in for power. It is meant to extent the existing WiFi signal further in AP mode and repeat the signal with other UAP devices.

Q: 9. is a mount included in the box?

A: There is a wall/pole mount included with the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point BH #UBUAPACMPRUS.

Q: 10. Does is support mesh?

A: The Ubiquiti Networks Dream Machine 4x4 MU-MIMO AC1733 Wave-2 Dual-Band Gigabit Access Point is compatible with UniFi mesh devices such as the U6 Mesh.