Keep your hardware protected from spikes and outages with the PR3000RTXL2UCN Smart App Sinewave UPS from CyberPower, a rack/tower convertible UPS with line-interactive topology, surge protection, battery backup, and sine wave output to eliminate power gaps that can be detected by sensitive equipment and cause unexpected shutdowns. This uninterruptible power supply (UPS) sports eight NEMA 5-20R outlets and one NEMA L5-30R outlet, all of which provide surge protection and battery backup, while four also serve as critical load outlets. Providing an output of 3000VA/3000W at 50/60 Hz, the PR3000RTXL2UCN Smart App Sinewave UPS can be used with 120V inputs. Line-interactive topology, automatic voltage regulation, and power-factor correction all ensure your connected equipment is appropriately powered, while a 2430-Joule surge suppression rating and a 30A circuit breaker prevent damage during a spike.

This UPS offers runtimes measuring 1.5 minutes at full load, or 5.5 minutes at half load, while the backup battery has a 3-hour recharge time. The sine wave power output results in low total harmonic distortion and electrical noise for improved line clarity. In addition to an RJ45 port for cloud monitoring, the rear panel also incorporates a USB-B, serial, and EPO ports for communication purposes as well as a pre-installed RMCARD205 network card for remote management and control via a standard web browser or network management system. Also available are Extended Battery Module (EBM) connections for extended runtime during power outages.

The multifunction LCD screen rotates 90° and can be used to monitor battery and power conditions and alerts to potential problems. Use PowerPanel Personal software to control your UPS via a convenient dashboard interface. The PR3000RTXL2UC utilizes a 10' power cable with a NEMA L5-30P plug for flexible deployment.

Output: 3000VA / 3000W    Input: 100-120 VAC (Range: 70-155 VAC)    8 × NEMA 5-20R | 1 x NEMA L5-30R    9 x Battery/Surge & 4 x Critical Outlets    RJ45 | USB-B | Serial | EPO    Pre-Installed RMCARD205 Network Card    Sine Waveform, Line-Interactive Topology    Automatic Voltage Regulation (AVR)    2430 Joules of Surge Suppression    Multifunction LCD Panel

• Corporate Servers
• Department Servers
• Network Devices
• Storage Devices
• Telecom Installations
• VoIP Installations

Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.

Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.

The UPS generates energy that is identical to, or cleaner than the utility company's power grid. Benefits include low total harmonic distortion, minimal electrical noise, and optimal line clarity.

This model accepts the RMCARD205 network management card for remote management and control via a standard web browser or network management system. Built-in cloud monitoring is included.

AVR increases or decreases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life.

Battery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.

Extend runtimes for critical devices by powering down non-critical equipment to free up battery capacity.

Allows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.

Tilts to provide a better viewing angle when the Smart App Sinewave is mounted low. Rotates 90° when placed in a tower format for horizontal viewing. Provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.

Makes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.

Allows for horizontal rack or vertical tower installation.

Provides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.

Exists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.

This model is an ENERGY STAR certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

A patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.

CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date.

CyberPower will repair or replace up to $400,000 of properly connected equipment if it is damaged by a power surge.

Related Questions and Answers

Q: 1. Does this product come with CyberPower RMCARD202 Remote Management Card - SNMP/HTTP?

A: No it does not.

Q: 2. Will this handle a devise that has a large amp draw?

A: This CyberPower Smart App Sinewave UPS will support up to a 20a draw. Note that only the bottom two outlets support that current. The others are 15a.

Q: 3. does this unit come with rack rails? can't seem to find that info anywhere. thanks!

A: Yes, the CyberPower PR1500RTXL2U Smart App Sinewave UPS BH #CYPR15RTXL2U includes rack rails.

Q: 4. Is this product compatible with Windows 10?

A: Hello Ray, Yes the accompanying software is compatible with Windows 10. Thank you for submitting your question!

Q: 5. Does the unit come with the comm. cables (usb, serial, epo)? If so, what type jacks are on both ends of USB cable furnished?

A: The CyberPower PR1500LCD Smart App Sinewave UPS ships with a DB-9 serial cable and a USB Type-B to Type-A cable.

Q: 6. I am installing this on a flyback but the courier service is asking if this is TSA compliant? Is it?

A: For questions regarding transporting the CyberPower OR1500LCDRT2U Smart App Intelligent LCD Equipped Uninterrupted Power Supply, please contact CyberPower directly for help.

Q: 7. Hi, for the CyberPower PR2200RTXL2U how many Extended Battery Modules (BH #CYBP48VP2U02 MFR #BP48VP2U02)can be added together?

A: The CyberPower PR2200RTXL2U Smart App Sinewave UPS BH #CYPR22RTXL2U supports up to 10 extended CyberPower Extended Battery Modules BH #CYBP48VP2U02.

Q: 8. Am I able to mount this on a 2 post server rack aka telecomm rack? If so, how? What railing system should I use?

A: The CyberPower OR500LCDRM1U Smart App LCD UPS BH #CYOR500LCDRM is compatible with standard racks(1 RU) and mounting hardware is included.

Q: 9. Can i add externas bateras ..?

A: Hi John - the unit does not have the ability to add external batteries. If you need extra batteries you would want to look at our PR2200LCDRTXL2U

Q: 10. does this make any noise? fan noise? I'm think about mounting this in my sound studio.

A: Bit late to the party, but in the hopes this may help someone: Yes, it makes noise. There is a constant hum, not just when on battery power, and noticeable vibration, kind of like touching a speaker. I would not recommend this for a quiet location.