Connect your Eurorack modular to the outside world with the intellijel Line Out 1U, a Eurorack level to balanced pro line level output shifter. The module is designed to convert a modular signal to balanced, line-level audio and route it into rackmount or desktop FX units, mixing consoles, digital audio workstations, and more. Simply connect the desired output of your Eurorack patch to the 3.5mm jack, connect the 1/4" jack to your destination of choice, and adjust the volume as required. The module includes a ribbon power cable.

Converts Eurorack Signals to +4 dBu Line    Up to +6 dB of Gain    3.5mm TS Eurorack Signal Input    1/4" TRS Line Output    Uses a THATCorp Balanced Line Driver IC    Includes Ribbon Power Cable

• Output path steps a nominal Eurorack level (10 V p-p) down to +4 dBu with up to +6 dB gain.
• Balanced TRS 1/4″ output path
• Uses a high quality THATCorp balanced line driver IC

• 10 HP Eurorack format module (1U)
• Maximum depth: 1.1" (27mm)
• Includes power ribbon cable with Eurorack power headers
• Power consumption: +12V: 9mA, -12V: 9mA

Related Questions and Answers

Q: 1. Anyone work on a older Protec Flugel + Trumpet case? Mine does not have screws and I'd likely have to drill out the axle.

A: PRO TEC lists the PRO TEC Replacement In-Line Skate Wheels (Set of 2) as being compatible with the following models. There is no guarantee it will work with anything else: IP110WL IP301DWL IP301TWL IP301QWL PB301VAX PB304SOPWL PL253

Q: 2. Are nuts or clips to fasten the bolts (screws) included?

A: The PRO Tec Replacement In-Line Skate Wheels have two screws included,however, there are no nuts or clips included.

Q: 3. Does it compatable with pilecan case im2750 series?

A: We are unable to measure and test whether this combination would work. Having said that, we feel there is a good chance it would. If you do not want to take a chance, then contact Pelican regarding replacement parts. https://bit.ly/2FI4Yhi

Q: 4. What is the inside diameter of the center hole?What is the outside diameter of the wheel?What is the thickness of the wheel?

A: What is the inside diameter of the center hole? 3/8 What is the outside diameter of the wheel? 2 1/4 What is the thickness of the wheel? 3/4

Q: 5. Does it campatable with pilecan im2750 series case?

A: We are unable to measure and test whether this combination would work. Having said that, we feel there is a good chance it would. If you do not want to take a chance, then contact Pelican regarding replacement parts. https://bit.ly/2FI4Yhi

Q: 6. Would this work for a canon 16-35 f/4?

A: The Canon 16-35mm f4 will not fit because it is too long. I would recommend this Lowepro instead: https://bhpho.to/2QV3nNe

Q: 7. What is the diameter of the screw shaft? I am looking for wheels with 5/16 (about 8 mm) diameter holes to fit the screws on my suitcase.

A: The diameter of the screw shaft is 6mm.

Q: 8. How many millimeters (mm) do these measure in height?

A: The PRO TEC Replacement In-Line Skate Wheels measure 2.5 x 2.5 x 0.75 , or 6.4 x 6.4 x 1.9 cm, which is equivalent to 19mm in height.

Q: 9. Can I use this device as a splitter to make a backup recording on a Zoom H6 for example?I mean, I have a shotgun mic. I split the signal in two, put it in two inputs of the recorder... I don't want to use a Y because I could lose a lot of gain on the two outputs. Or do you have other devices that can do this? Or a good mixer (I mean affordable 300-500) to to team with the H6 that can do this? I plan to use it with a Shotgun AND a Lavalier. So 2x2 outputs. Thanks! ;)

A: This device is designed for line level signals only. Splitting a microphone signal is never a good practice as there will be signal loss and added noise. A mixer, not a splitter is the way to go. The Mackie Mix8 (B&H # MAMIX8) is an 8-channel compact mixer that features high quality components, a rugged metal chassis, and is designed for a variety of sound reinforcement applications. The mixer features two mic/line inputs with 48V phantom power, two stereo 1/4 line inputs, and stereo 1/4 aux send and return. It is capable of accommodating dynamic and condenser microphones, keyboards, DJ setups, portable music players, and more.Each of the two mic/line inputs is equipped with XLR and 1/4 connectors, a dedicated 3-band EQ, aux send, pan, level control and an LED overload indicator. The two stereo 1/4 line inputs each feature an aux send, 3-band EQ, level control, balance control and also have an LED overload indicator. a href= http://bhpho.to/1sLQeDj target= _blank http://bhpho.to/1sLQeDj/a

Q: 10. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.