Connect your modular synthesizer with the outside world with intellijel Outs, a balanced stereo line and headphone output module in Eurorack format. Output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces.

Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4 dBu balanced professional line-level standard or the -10 dBV unbalanced standard. Headphone monitoring is also provided via a low-noise built-in headphone amp with its own independent level control, capable of driving a wide range of impedances from studio-grade headphones to portable style earbuds. The module includes a power ribbon cable and a set of mounting screws.

Connects Modular to the Outside World    Headphone Monitor with Separate Level    Two Mono 3.5mm Inputs (Eurorack Level)    Two Mono 1/4" TRS Outputs (Line Level)    1/4" Headphone Output    Module Depth: 1.4" (34.5mm)    Includes Ribbon Power Cable    Includes Set of Mounting Screws

• Studio-grade low-noise audio
• Headphone amp capable of driving high impedance headphones via 1/4″ stereo Neutrik jack.
• Two channel, +4 dBu balanced line level outputs on TRS 1/4″ Neutrik jacks (fully compatible with -10 dbV unbalanced audio gear).
• Left input is normaled to the Right input, allowing a mono input signal to drive both stereo output channels.
• LEDs to monitor the modular-level signal sent into the device.
• Attenuator knob for the line out level, plus a separate volume control for headphones.
• 3-pin link connector on the back for connecting the output of a Mixup module directly to the Outs module.

• 6 HP Eurorack format module
• Maximum depth: 1.4" (34.5mm)
• Includes power ribbon cable with Eurorack power headers
• Power consumption: +12V: 37mA, -12V: 29 mA

Related Questions and Answers

Q: 1. Can this spilt audio and mic from an iPhone 11 Pro if connected via Apple Lightning to 3.5mm adapter?

A: It can not.

Q: 2. Does this allow one to use a non-apple headset with mic (e.g. Bose SoundSport wired for Android) for phone calls on an iPhone 8+??

A: Those headsets wired for Android may not work with phone calls.

Q: 3. Yamaha RX-a730 has a 3-port RCA type av out (video/left/right). Is this where i would connect the base unit?

A: Yes, it should work. You would have to assign what audio goes out of the RCA connection if you have multiple sources you'd like to listen to.

Q: 4. I want to use the RS 175 system to monitor the output of an analog mixer that is part of a home recording setup. How much latency can I expect between the time the signal appears at the mixer and the time it reaches the headphones? I can't find any specs on latency.

A: As it operates on RF (Radio Frequency) it should provide none to very minimal Latency. Unfortunately the Sennheiser website is not providing any addition information on the Latency.

Q: 5. I would like to use 2 sets of RS 175 headphones on 2 different Samsung Smart tv’s. Can I put 1 transmitter on each tv and just move the headphones from set to set? How are the headphones paired with the transmitters? Thanks.

A: Yes, you should be able to do that. Pairing instructions are shown on page 24 of the user guide. https://www.bhphotovideo.com/lit_files/111450.pdf

Q: 6. Can this be used on a Sony a7ii?

A: You could most certainly use this On-Camera light with the Sony A7II.

Q: 7. Can anyone compare the sound quality of the RS 175 to the Sennheiser HD 450BT wireless (bluetooth) headphones?

A: I am not seeing much reviews on the differences in Sound Quality. They should be very similar. The one main difference between the 2 will be the connectivity. The RS175 has a Base that has Analog and Digital Optical Audio Input to which it transmits the audio to the packaged headphones over Radio Frequency (RF). A System like this is mainly used with a TV to transmit the audio. The HD450BT connects with Bluetooth which is meant to connect with a portable device like a Smartphone or Tablet.

Q: 8. Does this work with a battery powered lavelier mic like the Audio Technica ATR3350 ?

A: Sorry I don't know.

Q: 9. how do you hook the headtap up to a digital mixer?

A: The headtap has a standard 1/4 jack line out. so you can easily go from 1/4 to 1/4 or 1/4 to XLR from the headtap to the mixer. I connect mine coming off a wedge monitor for my bass player and it works great!

Q: 10. What is the Amperage (A) of the power adapter?

A: That specific information is not listed. However you could use a power supply such as the GyroVu USB to Sony L-Series Dummy Battery Cable with Power Supply (40") with this light. https://bhpho.to/3deJ5Hs