Extend the capabilities of your workstation using the USB-C 9-in-1 Docking Station from C2G. With Gigabit Ethernet, a 3.5mm headphone/mic combo jack, several USB ports, and dual video outputs, this docking station offers wide options when it comes to connecting peripherals. This docking station includes a 60W power supply but can support up to 100W of power delivery to your connected device.

USB-C Host Connection    1 x USB-C Power Delivery    3 x USB-A 3.0 Ports    2 x USB-A 2.0 Ports    2 x HDMI Ports up to 4K at 30 Hz    Gigabit Ethernet    1 x 3.5mm Headphone/Mic Combo Jack

Three USB-A 3.0 ports offer up to 5 Gb/s transfer speeds while two USB-A 2.0 ports offer 480 Mb/s transfer speeds perfect for peripherals like keyboards, mice, flash drives, or other external accessories.

The dual HDMI ports support a single display with 4K resolution at 30 Hz or two displays with 1080p resolution at 60 Hz. This docking station is TAA compliant.

This portable docking station has a metal build and connects to your host device through an integrated USB-C cable. The included 60W power supply keeps your device charged through the featured power delivery so this docking station doesn't drain your battery.

Related Questions and Answers

Q: 1. Does anyone know what battery plate is in that example image?

A: The plate pictured in the first image on the Tilta Dual-Handle Power Supply Bracket for Select DJI Gimbals' product page is the Tilta Battery Plate for DJI RS 2 Dual-Handle Power Supply Bracket (V-Mount)(BH #TITGADHBV). See: bhpho.to/3R1cjd0

Q: 2. Is there an handle accessory that will allow me to control follow focus on an RS3 with this rig? (NOT an RS3 Pro)

A: Control handle solutions like the Tilta Dual-Handle Power Supply Bracket for Select DJI Gimbals all require the DJI RS3 Pro Gimbal model.

Q: 3. I'm confused how a handle from Tilta advanced ring will connect to this--is a special nato rail adapter needed or included?

A: The Tilta Dual-Handle Power Supply Bracket for Select DJI Gimbals is not directly compatible with the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals (BH #TITGAARG). If you were to get the Tilta Remote Control Handle for Advanced Ring Grip for RS 2 and RS 3 Pro (BH #TIGAARGRCH ), which comes with a NATO rail adapter, you could use the included NATO rail adapter to mount one of the controllers from Advanced Ring Grip to the Tilta Dual-Handle Power Supply Bracket for Select DJI Gimbals. See: https://bhpho.to/326U7HX

Q: 4. Does this AC plug work with the Hyperdeck Studio HD Mini's?

A: No, the best choices for the Black Magic Hyperdeck Studio HD Mini are listed below. Non-Locking Blackmagic Design 12V Power Supply for Select Hardware BH #BLPSUSP Locking Blackmagic Design International Power Supply for Video Assist 12G (12 VDC, 36W) BH #BLPWRSPVA12G

Q: 5. How do you turn off power saving if hooked up to a nas?

A: The power saving feature of the Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station can not be disabled, so we do not advise using it with a NAS enclosure.

Q: 6. Can you install both grips (the BH #TIGAARGWCH and BH #TIGAARGRCH) to have control over remote recording as well as lens control? One installed on the left and one on the right?

A: The Tilta Dual-Handle Power Supply Bracket for Select DJI Gimbals will only allow the Ronin Battery Handle to be on the left side. You can then use the remote control handle on the right side.

Q: 7. Is this the best type of device to clone an old PCIe® NVMe™ M.2 SSD system drive to a larger one?

A: Yes, the Sabrent Tool-Free USB Type-C Dual Docking Station for PCIe NVMe M.2 SSDs with Offline Cloning Function would work well for cloning a M.2 drive to another M.2 drive.

Q: 8. Can it clone to NVMe ssd's of the same exact size? Or does the destination SSD HAVE to be larger?

A: The target drive does not have to be a larger drive and a SSD of the same exact storage capacity can be used. But to minimize the possibility of errors with the Sabrent Tool-Free USB Type-C Dual Docking Station, the target SSD should be the same model/manufacturer as the original.

Q: 9. Is this only compatible with came tv mini batteries or am I able to use other mini vmount batteries from other brands?

A: The CAME-TV Uninterruptible Power Supply Dual V-Mount Battery Plate would work with any v-mount battery size. You do not need to work with Mini sized batteries.

Q: 10. Can we hold this dual-handle bracket upside down and attach this to an Easyrig MiniMax?

A: Yes you can.