Upgrade your lighting experience with the black American DJ PAR Z100 5K2, a bright, white LED PAR fixture, which combines the aesthetic appeal of a traditional stage PAR can with the contemporary advantages of LED technology. The fixture features a 100W, 5700K white COB LED engine with a CRI of 90. With 5 manually adjustable zoom beam angles, along with DMX In/Out and locking power In/Out, the fixture facilitates the seamless connection of multiple units for permanent or temporary use.

The manual zoom lets you focus the beam at 9, 15, 20, 25, and 30° angles. The fixture can be controlled via two channels of DMX, and comes equipped with a powerCON in/out to daisy-chain up to 15 fixtures at 120V (25 at 230V). Other features include 0 to 100% electronic dimming with six dimmer modes, an LED display with a 4-button menu for easy navigation, and a universal, auto-sensing power supply. A gel frame for diffusion filters is also included (filters available separately).

For Theater, Film, and Video Production    100W White COB LED    0 to 100% Electronic Dimming w/ 6 Modes    9, 15, 20, 25, 30° Beam Angles    DMX: 3 or 4 Channel Modes    Primary/Secondary and Standalone Modes    5700K Color Temperature    powerCON I/O and 5-Pin DMX I/O    Includes Gel Frame for Diffusion Filters    Includes powerCON Power Cable

• 100W, 5700K White C.O.B. LED (Chip On Board)
• Manual Zoom: 9, 15, 20, 25, or 30°
• 4-button DMX menu display on rear panel
• OLED display
• Adjustable latch to manually change beam angle
• Includes gel frame for diffusion filters (Diffusion filter sold separately)
• Strobe Rate: 0.6 to 7.5 Hz
• Refresh Rate: 1.2 kHz
• Electronic Dimming: 0 to 100%
• 6 Dim Modes
• Daisy chain: 15 fixtures at 120V; 25 fixtures at 230V
• DMX: 5-pin DMX In/Out

• DMX-512
• 2 DMX control modes: (3 & 4 Ch. modes)
• RDM and RDM Net Compatible
• Primary/Secondary, stand-alone mode
• Onboard manual control mode

Related Questions and Answers

Q: 1. What is the maximum opening of the clamp?

A: 1 3/16" is the clamp opening size.

Q: 2. does the top piece unscrew? What is the recommended base?

A: No, it is a continuous single piece. Both ends are threaded with standard microphone connections, one end male other female (5/8-27 I believe).

Q: 3. Does B&H (or anybody) sell replacement elastic for this model mount? Mine is more than 10 years old and useless.

A: Hi, we do not sell replacement elastic bands for this model. You may contact the manufacturer for replacement parts @ https://on-stage.com/replacement_parts. Thank you for shopping at B&H!

Q: 4. How much developer. Does this container make?

A: You can make 2 quarts of developer with this container.

Q: 5. what is the thread size conneting to the Mic?

A: The On-Stage MSA9508 features a 5/8 threading to mount most standard mic clamps.

Q: 6. What color is this gooseneck?

A: Yes, it is Black.

Q: 7. How many inches long is the umbrella when folded?

A: Unfortunately, Savage does not list the length of the Savage Translucent Umbrella (36 ) when folded. The best I can list is the packaging dimensions for the umbrella are listed as 30.0 x 3.0 x 1.5 , so I would guess the umbrella is slightly shorter than 30 inches when folded closed.

Q: 8. Fit Sennheiser ME2?

A: Will fit, but will be lose... reccommend using a foam under the windjammer itself

Q: 9. Does this fit the MM-MSLM Microphone Madness lav without the foam? I lost mine at a gig.

A: Hi Adrian. This is not a mic we have tested with our Lavalier Windjammers here at Rycote HQ, but based on the capsule measurements I believe it will work. Note that you will need to use the supplied foam inserts to securely hold the capsule inside the Windjammer (these ship inside the packets). I hope that helps!

Q: 10. Do I need this for a Yeti Blue mic?

A: The Blue Yeti microphone has an included desktop stand built right into the microphone itself, you would not need a shock mount for that particular model.