Craft captivating displays on walls, floors, and ceilings with the American DJ UBL9H, a 42" versatile LED linear fixture with nine 20W, 6-in-1 HEX LEDs (RGBAL+UV) well suited for uplighting, downlighting, stage washing, and dancefloor illumination. The inclusion of the lime LED chip allows for a high CRI of >90, which ensures the fixture’s output will render colors accurately when used to illuminate scenery, décor, and people.

The LEDs are arranged in independently controllable groups of three, allowing for smooth color mixing, while creating of a wide variety of hues and shades. Additionally, the fixtures can also be used to generate white light output with color temperature variable between 2300 and 9900K. For even more versatility, the UV element allows the creation of a "blacklight" effect, causing white and neon colored décor and clothing to glow when used alone. The UBL12H comes complete with an indoor locking power cord, UC-IR24 remote, and a 20° diffusion filter.

For Uplighting, Downlighting, Wash, FX    9 x 20W, RGBAL+UV 6-in-1 LEDs    0 to 100% Dimming; 6 Modes, 4 Curves    17° Beam Angle/20° with Diffusion Filter    7 DMX Channel Modes    Smooth RGBAW+UV Color Mixing    64 Built-In Color Macros    5 Operational Modes    Includes Diffusion Filter & Power Cord    Includes Brackets and UC-IR24 Remote

• Ultrabright, 42" indoor linear bar with 9 x 20W ultrabright HEX (RGBAL + UV 6-in-1) LEDs
• Long-life LEDs (rated at approximately 50,000 hours)
• Linear color temperature control (2300 to 9900K)
• Smooth RGBAL+UV color mixing
• OLED display with 4-buttons
• 7 DMX channel modes: 6, 11, 13, 16, 18, 25, and 28 channels
• RDM Compatible
• 3 groups of three, RGBAL+UV LED pixels controllable via DMX in 18, 25, and 28 channel modes
• 5 operational modes: Auto Run, Program Mode, Sound Trigger, RGBAL+UV Manual, and DMX-512 Mode
• LED refresh rate: 1.9 kHz
• 64 built-in color macros
• 6 selectable Dim modes (Standard, Stage, TV, Architectural, Theatre, and Stage 2)
• 4 selectable Dim curves (Square, Linear, Inv. Square, and S. Curve)
• Built-in microphone for sound trigger
• Pulse and strobe effect
• Electronic dimming: 0-100
• Built-in horizontal magnetic alignment feature
• Compatible with the ADJ UC-IR24 remote. Operates at a distance of up to 32.8'

Related Questions and Answers

Q: 1. how do you install this device?

A: It is hard wired just like a wall switch or table lamp would be.

Q: 2. Is this rectangular or triangular? The only ONE picture shows very little and I am trying to determine how it hangs if three sides show and are illuminated?

A: This is rectangular in shape. Three of the sides are lit, and the fourth side would be mounted to a wall.

Q: 3. Is there any way you can install a remote / wireless switch for this device? If so, do you have any recommendations?

A: Good question. I believe there a few different ways to accomplish this install to be compatible with a wireless remote switch. You would have to do some research on that however. One way I know of is using a pico wireless remote and a Lutron PowPak RMJ-5R-DV-B. They are compatible together. The pico can be used as a portable remote device or it can be installed using a wall adapter. The powpak could be mounted right o. The side of a junction box or it could probably fit inside of the recording light fixture. There's plenty of room inside. I believe there's a 30' range on these devices. That's just one quick way of doing it for about $150-$200.

Q: 4. Can I get this same item but have it say, "LIVE MIC"?

A: Unfortunately Sandies and other manufacturers do not offer an LED sign that says "LIVE MIC" but Sandies does have the same sign with "RECORDING" which we do have available in stock. You can find it on the website listed as Sandies 393 Three-Sided RECORDING Light with LEDs - 110 VAC to 12 VDC LED Driver (B&H # SAN393REC110).

Q: 5. On/off switch? Do you plug into ac?

A: Yes it gets plugged into an AC line. The Power Supply is Not Included.

Q: 6. Is this item supposed to blink? It seems to be short circuiting when the switch is on. Wired it directly to a light switch/outlet.

A: They are not designed to blink unless the additional flasher is used (not included). We recommend having a professional electrician install these units.

Q: 7. Can this just be lugged into wall socket to turn on?

A: Yes - it will plug into an AC outlet.

Q: 8. How do you power this? It says the power supply is sold separately. Is it just a regular wall plug or do I need to get something else?

A: You will need a 24v Remote Transformer. We are in Australia and use 240v as standard. You should speak to an electrician regarding wiring.

Q: 9. Can I power directly with 12 volt DC?

A: No, this particular Sandies 340 RECORDING Light features a built-in 110 VAC to 12 VDC LED driver that allows you to use 110 VAC power. The 12 VDC version is MFR# 340-REC-12 which we should be able to order for you. Please contact us by phone if that is the one that you would like to order as we do not have it listed on the website. As another option, we do have the TecNec Industry-Standard Warning Light - Recording, 12 VDC (B&H # TES340REC12) which is a similar light that operates with 12 VDC.

Q: 10. can it be ceiling mounted like an exit sign?

A: Yes it can be mounted like an exit sign, but not to the actual ceiling. It mounts on the wall close to where the ceiling meets with the wall.