Control your modular like never before with the intellijel Tetrapad, a multidimensional performance touch controller that allows you to press and slide your fingers along the four pads to turn your movements into CV signals. The Tetrapad is designed to work with the optional Tête module, which adds looping/sequencing, CV control, and presets.

Each of its four pads use force-sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system. Use it as a keyboard, drum pads, a fader bank, LFOs, and voltage memory. You can even smooth out the rough edges with the built-in slew. The module ships with a ribbon power cable.

4 Pressure and Position Sensitive Pads    Eight Flexible Outputs & LED Indicators    Send Pitch, Gate, or Other CV Signals    Keyboard, Chord Gen, Fader Bank Modes    LFO Control, Drum Pads, Switches    Personalize Pressure Response    Works with Optional Tête Module    Includes Ribbon Power Cable

Tetrapad is a versatile multidimensional touch-sensitive control surface for Eurorack. Each of its four pads use force-sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.

• Four pressure- and position-sensitive pads, each with a corresponding pressable encoder and LED.
• Eight flexible outputs and LED indicators send Pitch, Gate, or other CV signals depending on the selected mode.
• The pads can be set to function as a keyboard, a chord generator, a bank of faders, an LFO control, drum pads, switches, or can trigger a specific voltage.
• Personalize pressure response and automatically save all settings for future use.

• Tetrapad operates in numerous modes—each configures the module to perform a specific control task. Through these modes, Tetrapad becomes an 8-key keyboard, a voltage storage device, or a 4-note chord generator. In its special Combo Mode, each pad can be assigned a function independent of the other three pads, such as: a fader, a bipolar fader, an LFO, a dual switch, or a finger drumming pad. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of the Tetrapad’s eight independent outputs, while its multitude of multicolored LEDs keep you informed of exactly what’s happening within each mode.
• Each mode contains 12 memory slots for that mode, allowing you to instantly recall one of 12 different custom keyboards; one of 12 different voltage maps; one of 12 fader/LFO/switch combinations; etc.
• Tetrapad automatically remembers how you’ve configured each of its modes and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance since you know it will always power up with your configurations intact.

Available separately, the Tête expands the Tetrapad touch surface. Capture your gestures, save them, play them back with the Tête's looper or step sequencer. Modulate your physical input with external CV from your modular, and sync all of your motions with the internal or an external clock.

• 20 HP Eurorack format module
• Maximum depth: 0.7" (19mm)
• Includes power ribbon cable with Eurorack power headers
• Power consumption: +12V: 130mA, -12V: 15mA

Related Questions and Answers

Q: 1. Will this work with the Sony HXR-NX100 Full HD NXCAM Camcorder?

A: Yes.

Q: 2. Is the zoom rate a smooth transition from gently pressed to all the way? As in, is it good for on-camera zooms. I would like to use it on my Steadicam for sports.

A: Yes, you can do real on-camera zooms with this control.

Q: 3. Does this receiver only have a HDMI out?

A: Yes, the Teradek Bolt 4K RX Monitor has one (1) HDMI out.

Q: 4. Does this TPC-700 also interface to the Datavideo DVK-400 Chromakey hardware?

A: Yes, the TPC-700 Datavideo 7" Touch Panel Controller will also support the Datavideo DVK-400 4K Chromakey.

Q: 5. is this compatible with canon DSLRs and lenses?

A: This is designed to run with the servo mechanisms attached to zoom lenses on professional cameras. It uses a common ENG connector, which is a circular connector, has 8 pins, and is about 1/2 in diameter. I can't imagine that any DLSR would be compatible.

Q: 6. Will this work with SONY HDR-CX230 ?

A: It will not. This controller is not compatible with the CX230.

Q: 7. Will this work with the Canon 50-1000 lens?

A: We are not aware of this controller working with that Cinema Lens.

Q: 8. will this work for the Sony FDR-AX100? looking for a zoom remote can't seem to find one. thanks

A: I use it together with a AX100 and it works although I had to buy a separate adaptercable from Sony AV to Sony Multi. The zoom-wipe needs a little bit of fingertrainig to figure out the ideal amount of pressure for the desired zoom-speed...

Q: 9. how to adjust pupillary distance?

A: Page 02 in the manual shows how to adjust the Epson Moverio BT-40S. https://files.support.epson.com/docid/other/4140169.pdf

Q: 10. Does this work with the FX9 and Sony 28-135 lens combo?

A: Yes, the MagnusVC-20-SCP LANC Zoom Controller will connect to the SONY FX9's LANC input, and control a SONY PZ lens like the Sony FE PZ 28-135mm f/4 G OSS Full-Frame Power Zoom Lens. Please note you will not need to use the AVR cable with the kit.