The 82mm Kase KW Revolution Professional ND Kit features ND8, ND64, ND1000, and CPL magnetic filters as part of Kase's color-coded KW Revolution filter system. The filters are designed with color-coded filter frames for easy identification and swapping. The ND8 is color-coded blue, the ND64 is yellow, the ND1000 is red, and the CPL is silver. The kit also includes adapter rings, a filter case, and one front lens cap. The KW Revolution system is based on Kase's earlier Wolverine series and is fully backwards compatible with Wolverine filters.

KW Revolution filters are made with shock-resistant and water-resistant optical glass that's durable, easy to clean, and doesn't cause any color cast. In addition to being magnetic, the filters are also front threaded. This is one of the differences between the KW Revolution series and the earlier Wolverine series.

This kit includes both the standard magnetic adapter and the inlaid magnetic adapter supported by the KW Revolution series. The standard one screws onto your lens and lets you magnetically attach the filter to it. But the inlaid adapter works a bit differently. It secures to your lens in a very recessed way. It screws onto the front filter threads very close to the front lens element and nearly hidden within the filter thread area. It hardly leaves any space between the lens and filter. This results in minimized vignetting with wide angle lenses when you attach the filter. The filter snaps onto the adapter magnetically. Up to four filters can be stacked in total, both from this KW Revolution series and from the earlier Wolverine series, and the filters can be freely rotated. Please see more about the inlaid adapter below.

0.3, 1.8 & 3.0 Optical Density    Shock-Resistant Glass    Color-Coded Magnetic Filters    Includes Filter Case and Front Lens Cap    Standard and Inlaid Magnetic Adapters    Stackable    Front Threaded    Compatible with Kase Wolverine Filters

When your KW Revolution filter (or backwards compatible Wolverine filter) is removed from the inlaid adapter, you can leave the adapter on the lens. It will not interfere with attaching the original lens cap to the front of your lens. Similarly, it won't interfere with screwing in regular screw-in filters to the filter threads of the lens.

Besides securing directly to the lens, the inlaid adapter can instead be screwed onto the front threads of regular screw-in filters. The screw-in filter can then be screwed onto your lens, and the inlaid adapter will be on the front of that filter. You can then magnetically attach KW Revolution and Wolverine filters onto the adapter. The benefit of this flexibility is that it allows you to mount the KW Revolution filters on top of regular screw-in filters that you may want at the bottom of your stack.

The inlaid adapter is not compatible with step rings.

There are a few ways to screw in the ultra-slim inlaid adapter. The main way is to first attach it magnetically to one of the included ND filters, and to then screw in both by hand. This allows you to remove the filter or stack additional ones onto it. You can also attach the optional Kase magnetic lens hood.

Related Questions and Answers

Q: 1. does this setup accommodate the Sony AS7 ii or similar?

A: The PK-02B kit was specially designed for DSLR cameras. Lanparte has a MCK-03 kit specially designed for SONY AS7 II. It comes with a cage that specially designed for mirrorless cameras.

Q: 2. Can this fit the c100 mk 2?

A: This is a very nicely designed and full feature rig for a DSLR. I would say however that the C series of Canon cameras, while you could probably get it to mostly fit, I doubt the C arm would clear.

Q: 3. Hello Can I use MagMod XL Professional Strobe Kit with Elinchrom ONE unit? Do I need any other adapter for connection? Thank you

A: Yes, you can use MagMod XL Professional Strobe Kit with Elinchrom One as long as you also use the Profoto Mount for the XL Reflecor.

Q: 4. Could this work with the LS300? If so what cable would I need to get this to work with the battery?

A: I am sure it could be made to work. You would need a cable with barrel connectors on both ends. Unfortunately, at this time there is no known cable available for the LanParte VBP-01 Sony V-Mount Battery Pinch to connect to the JVC GY-LS300. I could not find one with either LanParte or JVC. I would then have to recommend that you get a technician experienced in making such cables to create a custom one for you. Camera rental houses often have people who can do this for a fee.

Q: 5. What is the fully assembled weight of the product?

A: Feels like about 20-25 lbs.

Q: 6. Hi, I wonder if this rig works fully with a Nikon D810 camera. I have the 14-24 2.8 the 24-70 2.8 and 70-200 2.8 lenses. Can these lenses be used on this rig provided the D810 works ok here? Can some one shed some light into the battery pack shown? How does that work? is it usable for the Nikon? Sorry for silly questions but I'm just starting on cine. Thank you.

A: Carlos, as I used to say when I was in the movie business, Everyone has a first day on set. This rig will be great for your fine Nikon package. The camera can be mounted and the lenses supported if required. I would suggest you call or email us to order this kit and request the substitution of the battery coupler from the Canon battery to the Nikon battery type. See below. The big battery will not only power the camera, but the monitor and an external recorder if you get one. There are power outputs for every popular type of connection and voltage.

Q: 7. Is the VCT-14 plate included in this kit?

A: No it does not come with VCT-14 plate.

Q: 8. Will the black magic pocket 4k work on this rig?

A: This kit is really designed with Mirrorless and DSLR cameras in mind. We do not recommend it with the Pocket Cinema Camera 4K. Instead we suggest B&H # SHBM4SMKI from Shape, which is a kit designed specially for the Pocket Cinema Camera 4K. https://bhpho.to/2Eg4BcY

Q: 9. Hello, Ive a nikon D610 it is compatible ?

A: The Nikon D610 will fit in the Outex Underwater Camera Cover Kit (Small, 82mm Lens). You could use lenses that are 6" long or shorter. The front glass is for lenses that have a 82mm filter thread. Other size front glasses are available.

Q: 10. Can this be used with the Canon EOS-1D X Mark II? The Mark II is higher by 0.2in than the EOS 1DC. Thank you.

A: While we are not able to test the configuration you are asking about, it is our opinion that this rig will accommodate the 1D X Mark II.