Bring flexible cooling and storage to your build with the North Mid-Tower Case in charcoal black with a dark tinted side panel from Fractal Design. Supporting ATX, Micro-ATX, and Mini-ITX motherboards, this case supports up to three 2.5/3.5" drive bays and comes with two; each drive bay can be used to install a 2.5 or 3.5" drive, or both simultaneously. Additionally, two 2.5" drives can be mounted behind the motherboard tray. Seven expansion slots provide space for adapter cards, including GPUs up to 13.9". PSUs up to 10" are also supported, along with CPU coolers up to 6.7".

Two preinstalled 140mm fans provide efficient cooling right out of the box. A total of four 140mm or six 120mm fans can be installed . Or, install radiators up to 240 and 360mm at the top and front of the case, respectively. Featuring walnut wood slats and an open front, this case utilizes a steel frame and dark tinted tempered glass side panel. A front I/O panel sports a USB-C 3.1 Gen 2 and two USB-A 3.0/3.1 Gen 1 ports, audio input and output jacks, and brass hardware accents.

ATX, Micro-ATX, and Mini-ITX Support    Steel Frame & Windowed Side Panel    2 x 2.5/3.5" Drive Bays    2 x 2.5" Drive Mounts    7 x Expansion Slots    USB-C 3.1 Gen 2, 2 x USB-A 3.1 Gen 1    2 x 140mm Fans Included    Support for Liquid Cooling Systems    Supports GPUs up to 13.9"    Supports PSUs up to 10"

Enhance your gaming station with real wood slats on the front of the case, as well as a faux leather tab and brass hardware accents.

Get efficient cooling with two preinstalled 140mm fans or install radiators up to 240 and 360mm at the top and front of the case, respectively. This case supports GPUs up to 13.9" with front fans installed, or up to 11.8" with a 360mm radiator installed. Additionally, seven bridgeless expansion slots allow for extensive customization.

Get easy access to internals by removing the side panels, unclipping the front, and popping off the top panel using an integrated tab.

Up airflow and cooling potential via an open front and a mesh top panel.

• Use the two included 2.5/3.5" drive bays to install two 2.5" and two 3.5" drives simultaneously
• Mounting points provide space for a third drive bay, available separately
• Two dedicated 2.5" drive mounts behind the motherboard tray provide room for even more storage

Make the most of your building experience with an intuitive interior layout. Two 140mm fans come preinstalled and the case fits a total of four 140mm or six 120mm fans .

Doubling the speed of its predecessor, USB 3.1 Gen 2 features a maximum throughput of 10 Gb/s when used with compatible devices and is synonymous with USB 3.2 Gen 2.

Related Questions and Answers

Q: 1. I want to carry a R5 with RF 24-70 2.8 attached, RF 70-200 2.8, godox V1 flash and some batteries. Is it capable?

A: Yes, the Peak Design Everyday Backpack v2 (30L, Black) is more than large enough to fit R5 with RF 24-70 2.8 attached, RF 70-200 2.8, Godox V1 flash and some batteries

Q: 2. Has anyone else had any issues with the sternum straps or shoulder straps loosening up on their own? My straps have started to loosen up on their own and it happens all the time.

A: There have not been any reported issues with straps loosening on the Peak Design Everyday Backpack v2 (30L, Black).

Q: 3. does it fit Sony A7RIV, 50mm and 18mm and 100-400 mm lens along with Mavic Air 2S ?

A: Yes, the Peak Design Everyday Backpack v2 (30L, Black) should be able to store the Sony Alpha a7R IV Mirrorless Digital Camera, the Sony FE 50mm f/1.2 GM Lens, the Sony FE 100-400mm f/4.5-5.6 GM OSS Lens, the DJI Air 2S Drone, and a standard 18mm lens.

Q: 4. Is the 13" enough to carry the Olympus E-M1 mk II along with 3 of the olympus pro lenses (i.e., 7-14, 12-40 and 40-150)?

A: You'll be able to fit all that gear inside the 13", though won't have much room for anything else. Be sure to move up to the 15" if you want to expand further than that.

Q: 5. Would 30L version fit under airline seats?

A: Different airlines have different requirements, however, based on the 'universal requirements' of 18 x 14 x 8 inches, the Peak Design Everyday Backpack v2 (Midnight, 30L) is too big to be an under the seat item.

Q: 6. How does this compare to the mindshift or mckinnon - cross-shopping all 3?

A: Unfortunately, all bags have their merits and it's hard to do a precise comparison of all three based on your use case. I'd recommend giving us a call or live-chatting with us and we can discuss them and potentially other options that would suit your needs!

Q: 7. Will this fit a Leica Q2 with lens hood attached?

A: Depending on how you orient the camera inside the case, yes, you should be able to fit the Leica Q2 Digital Camera and lens hood inside the Peak Design Field Pouch v2 (Charcoal).

Q: 8. will this fit the tamron 24-70 f2.8,70-200 f2.8, and the 150-600 plus a camera body?

A: Yes, you can fit that gear into the Peak Design Everyday Backpack v2.

Q: 9. Is the Field Pouch big enough to hold a Fujifilm X100V?

A: Yes, the Peak Design Field Pouch v2 will be able to hold the Fujifilm X100V.

Q: 10. How are the side entries for using camera gear? I’m coming from the more traditional camera backpack, curious if anyone can share their experience.

A: The side entries are very convenient and practical to use, just slide the bag around to the side or front and access the gear, very easy.