Vcf Release Notes

Erica Synths Black Lpg Low-pass Gate Eurorack Module (10 Hp)

Product Code: ga170949
Availability: In Stock

$627.00 $815.10

Qty

0 reviews Write a review

Description
Reviews (0)

Modular synthesizer enthusiasts in search of versatile sound-shaping processor will be impressed with the erica synths Black LPG, a low-pass gate circuit inspired by the original Buchla design, that combines a 2nd order low-pass VCF with a VCA with a distinctive resonance circuit on top. Voltage control over VCF cutoff frequency, VCA offset, and mode (VCF / VCF+VCA / VCA), as well as built in decay envelope generator makes it a versatile module for sound shaping in any modular setup. The module includes a power ribbon cable and a set of mounting screws.

Full Analog Design 3 Vactrols for 2nd Order VCF VCF / VCF+VCA / VCA Modes Manual and VC of Cutoff / Offset Manually and VC Mode Selection Resonance: Manual Control + Overdrive Decay Envelope Generator with CV Output Manual and VC of Decay Time Module Depth: 1.4" (35mm) Includes Ribbon Cable & Mounting Screws

Key Specs
Sound Generation	Analog
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output 1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input
MIDI I/O	No
CV/Gate I/O	1x 1/8" / 3.5 mm TS Trigger Input 3x 1/8" / 3.5 mm TS CV Input 1x 1/8" / 3.5 mm TS CV Output
Patch Points	No
Eurorack Current Consumption	44 mA on +12 V Rail 45 mA on -12 V Rail
Horizontal Pitch	10 HP
General
Item Type	Eurorack Module
Sound Generation	Analog
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	No
Performance Functions	No
Built-In Speaker	No
Synthesis
Oscillators	No
Mixer	No
Amplifiers	1x VCA
Envelopes	1x VCF/Assignable Envelope Generator: Decay
Filters	Number of Filters: 1 Characteristic: Analog Type: Low-Pass Gate Slope: 2-Pole/12 dB (LPF) Controls: Cutoff, Resonance, Drive
LFOs	No
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output 1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	1x 1/8" / 3.5 mm TS Trigger Input 3x 1/8" / 3.5 mm TS CV Input 1x 1/8" / 3.5 mm TS CV Output
Control Voltage Level	Modulation CV In: -5 to +5 V
Patch Points	No
Sync I/O	No
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Maximum Output Level	10 V p-p
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	44 mA on +12 V Rail 45 mA on -12 V Rail
Physical
Color	Black
Horizontal Pitch	10 HP
Included Accessories	No
Packaging Info
Package Weight	0.46 lb
Box Dimensions (LxWxH)	7.8 x 4.15 x 2.55"

Three vactrols for 2nd order VCF
VCF/VCF+VCA/VCA modes
Manual and voltage-controlled cutoff/offset
Manual and voltage-controlled mode selection
Manual resonance depth control
Resonance overdrive switch
Built in decay envelope generator
Manually and voltage-controlled decay time
Envelope CV output
Skiff-friendly design
Power consumption: +44mA / -45mA
Module depth: 1.4" / 35mm

Related Questions and Answers

Q: 1. Would this work well as a slider stand for Dana or Shuttle Dolly?

A: With the pop up 5/8 pin, this stand can work with both the Dana Dolly and the Kessler Crane Shuttle Dolly.

Q: 2. Can I put it in the dryer?

A: Yes this can put in a dryer on a low setting.

Q: 3. For those using this as a tethering stand, what adapter are you using to mount your case/table?

A: To answer my own question (for others that might be wondering), I ended up buying the Manfrotto 1 1/8 (28mm) Male Adapter . With a couple modifications (two 3/8 nuts and a wide washer) I was able to mount my SKB laptop case perfectly!

Q: 4. Is this machine washable?

A: Yes.

Q: 5. Can I add another section to this and make it taller?

A: The Avenger Junior Roller Low Boy Stand with Combo Head (Chrome/Black, 4') BH #AVA5012 can be used with Junior pin column extensions.

Q: 6. How well does it block light? Obviously it doesn't block 100% of light coming through, but is it effective enough to use as a window covering on location?

A: The Impact Muslin Background (Black, 10 x 12') would not be ideal for covering a window to block light. You would be much better using duvetyne like the TRP WORLDWIDE Duvetyne / Commando Cloth (8 x 8'), B&H # TRS8, MFR # S8.

Q: 7. Will this work with the Delta 1 Muslin Mover System?

A: Not initially, because the top has a tunnel to put a rod through, but since your system uses hooks (I'm guessing), you could manually make the holes and it will work just as well .

Q: 8. Description states 10' x 12' - 10 feet wide or high?

A: This is ten feet tall by twelve feet wide.

Q: 9. Can I add casters to these? Specs say it is not compatible with wheels but accessories list casters from various brands including Kupo

A: Yes, The following third party casters can adapt to the following stand. Avenger A9000N Wheel Set with Brakes https://bhpho.to/3f99nLo

Q: 10. weight?

A: It is pretty light, only 15 pounds.

There are no reviews for this product.