Designed for use with the ARRI ALEXA 35 Live Multi-Cam System, this CCM-1 Camera Control Monitor for Live Production Set equips you with full camera control and menu access in a touchscreen display along with an improved monitor yoke support and any necessary cabling. his 7" onboard monitor features a single EVF-cable solution for imaging, control, and power for sleek rigging, BNC input and loop output, battery options, and a choice of touchscreen, side button, and joystick/button control. Display tools are based on the SmallHD monitoring tool kit familiar to many ACs and operators. This kit comprises the CCM-1 monitor, a folding sunshade, a screen protector, an MYS-1L monitor yoke support, two 1.5' VF cables, and a 1.6' RS power cable.

For ARRI ALEXA 35 Live    7" Camera Control Monitor    Monitor Yoke Support MYS-1L    Touchscreen Display and Physical Buttons    Includes Folding Sunshade    Includes Screen Protector and Cables

Designed for use with the ARRI ALEXA 35 Live Multi-Cam System, this CCM-1 Camera Control Monitor for Live Production Set equips you with full camera control and menu access in a touchscreen display along with an improved monitor yoke support and any necessary cabling. his 7" onboard monitor features a single EVF-cable solution for imaging, control, and power for sleek rigging, BNC input and loop output, battery options, and a choice of touchscreen, side button, and joystick/button control. Display tools are based on the SmallHD monitoring tool kit familiar to many ACs and operators. This kit comprises the CCM-1 monitor, a folding sunshade, a screen protector, an MYS-1L monitor yoke support, two 1.5' VF cables, and a 1.6' RS power cable.

Compatible with the ARRI ALEXA 35 Live, the new MYS-1L monitor yoke features improved springs suited for supporting the CCM-1 monitor than the previous version. Once mounted to the support you can adjust your viewing angle on four axes, one of which includes a built-in counterbalance.

The CCM-1 offers full camera control and novel viewing configurations for both the ALEXA 35, ALEXA 35 Live, and ALEXA Mini LF digital cinema cameras. It can use the same viewfinder connector as the MVF-2 without taking up one of the camera's SDI ports, providing an alternate means of imaging, control, and menu selection, or it can be used alongside the MVF-2. The CCM-1 uses SmallHD PageOS, which enables LUTs to be added to a Page or Pages with the monitor LUT tool. Both the ALEXA 35/35 Live and Mini LF will require an upcoming firmware update to be fully functional with the CCM-1.

• The CCM-1 employs a 7" IPS LCD screen to display a bright, high-contrast 1080 x 1200 HD image with ARRI-quality color accuracy and subtlety.
• Display tools like focus peaking and false color affect only the image, not the status overlays, for easy viewability.
• Sensor-level functions like zooming use the sensor resolution for improved focus checking and more.
• The CCM-1 uses SmallHD PageOS which enables LUTs to be added to a Page or Pages with the monitor LUT tool.
• Status changes can be viewed in real time as interactive settings overlaid on the live image.
• An updated home screen displays all relevant camera information.
• Each of the five main exposure parameters can be expanded for a live preview over your image.
• Access all your camera settings via the touchscreen, side buttons, or rear joystick and buttons.
• Playback control has been improved with an extended clip list and both menu and user button control.
• Both the side buttons and the joystick and back buttons combination are positioned on the left side for easy, single-handed use.
• The side buttons include a dedicated Menu button and four user-assignable buttons.
• When used with your camera's VF connector, the CCM-1 leaves both SDI outputs free for other uses.
• The CCM-1 supports up to 33' VF cables that are ideal for distanced use for live event productions.
• Connect the CCM-1 via its SDI ports to enable ALF-1 and ALF-2 application, access the full SmallHD tool set, and use with third-party cameras.
• The 3G-SDI input and loop outputs can be used for monitoring when using a Hi-5 or other wireless controller.
• A new 5-pin LEMO USB port can be used with the upcoming USB-to-Ethernet adapter to enable ALEXA Mini LF camera control while simultaneously using an MVF-2.
• The 3.5mm TRS audio jack provides the same headphone monitoring as the MVF-2.
• A user-replaceable steel block enables you to switch out the more frequently used ports in case of excessive wear.
• When used with a single power/image/control VF cable, the CCM-1 provides the REC 709 standard of 100 cd/m² brightness, which is suitable for studio and interior use.
• Add a power cable with DC input or an onboard battery using a separate plate to boost the brightness to 1300 cd/m² for outdoor viewing.

Related Questions and Answers

Q: 1. Is a licensed Win Pro OS included (installed) with the system?

A: Yes, Via OS windows 10 pro.

Q: 2. Is there a multilanguage support?

A: This is a Windows-based switcher which requires compatible, separately available, streaming and mixing software. It will have whatever language support is available through Windows.

Q: 3. Does the Go Plus come with the Replay capabilities?

A: Yes, the vMix GO Plus includes the full vMix Replay capabilities.

Q: 4. Is this compatible for a7s iii?

A: The Sony a7S iii has a multi port that this cable could connect too. However, the camera is not listed under the compatible cameras. So I can not guarantee this will work with the a7S iii.

Q: 5. What is the typical latency of the unit when outputting to an external source such as a projector?

A: As a Production Switcher the output should be real time. If there is any latency it should be undetectable.

Q: 6. Does lanc control work with the fx3, if so does touch to focus work?

A: The Sony FX3 Full-Frame Cinema Camera (B&H # SOFX3) does not have a LANC port, which will not allow for control on the Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control.

Q: 7. Does this provide closed-captioning capabilities?

A: Closed-captioning could be implemented when using Wirecast software and a subscription to their Web Services option https://www.telestream.net/Wirecast/WebServices/ , which has specific tools for live captioning. Please note that the ACMEGO44K does require software such as Wirecast (TEWCSW) or Vmix (VMSCSIVMIX4K) for full operation.

Q: 8. What version of Vmix is included?

A: The Switchblade M9 Pro SDI includes vMix 4K.

Q: 9. Does lanc control work with the fx6? does touch to focus work?

A: The Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control has no camera controls that work with the Sony FX6 whatsoever.

Q: 10. Can you loop through HDMI input to SDI output?

A: The Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control does allow for loop out with either HDMI or SDI.