The 95mm Kase KW Revolution Professional ND Kit features ND8, ND64, ND1000, and CPL magnetic filters as part of Kase's color-coded KW Revolution filter system. The filters are designed with color-coded filter frames for easy identification and swapping. The ND8 is color-coded blue, the ND64 is yellow, the ND1000 is red, and the CPL is silver. The kit also includes adapter rings, a filter case, and one front lens cap. The KW Revolution system is based on Kase's earlier Wolverine series and is fully backwards compatible with Wolverine filters.

KW Revolution filters are made with shock-resistant and water-resistant optical glass that's durable, easy to clean, and doesn't cause any color cast. In addition to being magnetic, the filters are also front threaded. This is one of the differences between the KW Revolution series and the earlier Wolverine series.

This kit includes both the standard magnetic adapter and the inlaid magnetic adapter supported by the KW Revolution series. The standard one screws onto your lens and lets you magnetically attach the filter to it. But the inlaid adapter works a bit differently. It secures to your lens in a very recessed way. It screws onto the front filter threads very close to the front lens element and nearly hidden within the filter thread area. It hardly leaves any space between the lens and filter. This results in minimized vignetting with wide angle lenses when you attach the filter. The filter snaps onto the adapter magnetically. Up to four filters can be stacked in total, both from this KW Revolution series and from the earlier Wolverine series, and the filters can be freely rotated. Please see more about the inlaid adapter below.

0.3, 1.8 & 3.0 Optical Density    Shock-Resistant Glass    Color-Coded Magnetic Filters    Includes Filter Case and Front Lens Cap    Standard and Inlaid Magnetic Adapters    Stackable    Front Threaded    Compatible with Kase Wolverine Filters

When your KW Revolution filter (or backwards compatible Wolverine filter) is removed from the inlaid adapter, you can leave the adapter on the lens. It will not interfere with attaching the original lens cap to the front of your lens. Similarly, it won't interfere with screwing in regular screw-in filters to the filter threads of the lens.

Besides securing directly to the lens, the inlaid adapter can instead be screwed onto the front threads of regular screw-in filters. The screw-in filter can then be screwed onto your lens, and the inlaid adapter will be on the front of that filter. You can then magnetically attach KW Revolution and Wolverine filters onto the adapter. The benefit of this flexibility is that it allows you to mount the KW Revolution filters on top of regular screw-in filters that you may want at the bottom of your stack.

The inlaid adapter is not compatible with step rings.

There are a few ways to screw in the ultra-slim inlaid adapter. The main way is to first attach it magnetically to one of the included ND filters, and to then screw in both by hand. This allows you to remove the filter or stack additional ones onto it. You can also attach the optional Kase magnetic lens hood.

Related Questions and Answers

Q: 1. Would this rig work with a Blackmagic Ursa Mini?

A: The Lanparte Professional DSLR Kit V1 is for a DSLR camera therefore I believe it would not work.At this time, there is no rig specifically for the URSA Mini since it is so new it is not out yet. I would look for offerings by Lanparte, Wooden Camera, Zacuto and SHAPE.Attached is a basic rig that would get you started.

Q: 2. Will this rig work with a BlackMagic URSA mini 4.6k Pro? How about the new Panasonic AU-EVA1?

A: No, this will not work with either of those cameras for this is for much smaller DSLR cameras. For the BMD URSA Mini Pro we suggest this: SHAPE Blackmagic URSA Mini Kit with Matte Box & Follow Focus Pro B&H # SHURSAKIT. It has yet to be tested but this SHAPE rig probably will work with the AU-EVA1 as well.

Q: 3. Does this kit also fits with a Blackmagic 2.5k?

A: Yes, this rig can be used with a Blackmagic Cinema Camera.

Q: 4. Will this rig work with a 5D MKIII with a 70-200 L series lens? Do I have to purchase longer rods?

A: HiDepending on how you configure it, you might need longer rods. But it is as easy as getting LanParte's rod extension screws and go for your preferred length. But keep in mind tele lenses like 70-200 will need a tele lens support LanParte TS-02.

Q: 5. Does this rid fit the A7S Sony?

A: Will the battery pack power a A7S camera?

Q: 6. Will the battery pack power a A7S camera?

A: You would need an adapter such as B&H#: WOWC194700 which would convert the battery used within the A7s camera into a D-tap connection in which you could connect onto the D-tap port on the Lanparte V-mount battery plate.

Q: 7. If available where can I get the counter weights?

A: Here you go: Lanparte Stainless Steel Counter Weight B&H # LACW01

Q: 8. Does this fit westcott fj400?

A: As the MagMod XL Professional Strobe Kit uses the Bowens S-mount to connect to light fixtures, yes, the MagMod XL Professional Strobe Kit would be compatible for use with the Westcott FJ400 400Ws Strobe.

Q: 9. Does it come with batteries for the monitor?

A: The kit comes with a spring power cord that can power the monitor via battery and battery pinch power system.

Q: 10. can I use a nikon D4 on this rig?

A: Yes, LanParte PK-01 rig will take your Nikon D4 securely! The Magic Arm and Matte Box are both height adjustable so it will give you enough clearance for the D4. Also the Bridge Plate is height adjustable as well!