Filmmakers get more control over what they capture with this Mavic 3 Pro Drone Fly More Combo with DJI RC Pro from DJI. This flagship drone adds a third lens to the system with the 70mm f/2.8 medium telephoto to enhance your creative possibilities with more control of how much you capture of a subject and its surroundings. Remaining are the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, which has been upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe, even for beginner pilots.

Open Box Products Have a Limited 1-Year Manufacturer Warranty (Excluding Battery & Propellers)    3-Axis Gimbal with Tri-Camera System    20MP 5.1K Wide-Angle 4/3 CMOS Hasselblad    166mm 12MP 7x Zoom Telephoto    70mm 48MP 3x Zoom Medium Telephoto Lens    7 Intelligent Flight Modes    Up to 43 Minutes of Flight Time    O3+ Transmission with a 9.3-Mile Range    Omnidirectional Avoidance with APAS 5.0    D-LOG, D-LOG M & HLG Post Processing    Fly More Combo & DJI RC Pro Remote

• 24mm Hasselblad Wide-Angle: The 20MP Hasselblad camera remains, with its adjustable f/2.8 to f/11 aperture and large 4/3 CMOS sensor for reduced noise in low-light situations. It offers 5.1K video resolution at 50 fps and incorporates the Hasselblad Natural Color Solution (HNCS) to capture and produce true-to-life colors in your media. When post-processing, you can use D-Log, D-Log M, and HLG.
• 70mm Medium Telephoto: The new camera in the tri-cam system, this 48MP lens offers an f/2.8 aperture and 1/1.3" CMOS for excellent day and night shots. Video is captured in 4K at 60 fps, and you can get clearer midrange shots with a 3x optical zoom. D-Log M and HLG are supported for efficient post-production, and it's capable of taking advantage of Night, ActiveTrack, and Hyperlapse shooting modes.
• 166mm Telephoto: This 12MP full telephoto lens returns, but with an updated aperture of f/3.4, letting more light in for better low-light performance using its 1/2" CMOS. It also improves its 4K fps from 30 to 60 for smoother video and incorporates a 7x optical zoom for clear close-ups.

An omnidirectional obstacle sensing system with APAS 5.0 technology actively detects obstacles during flight and will automatically plot safe routes around them during flight.

• Waypoint Flight
• Cruise Control
• Hyperlapse
• MaserShots
• FocusTrack
• Panorama
• QuickShots

Wide, Medium Telephoto & Telephoto Lenses

• Normal (8-bit 4:2:0): H.264 & H.265
• HLG/D-Log M (10-bit 4:2:0): H.265

Wide Lens

• D-Log (10-bit 4:2:0): H.264 & H.265

• Up to 43 minutes of flight time
• O3+ video transmission from up to 9.3 miles away
• Supports optional DJI Goggles 2, Goggles Integra, and RC Motion 2 for a more immersive flight experience

Related Questions and Answers

Q: 1. Is the Camera a true 48 mp sensor or is a tricked up 24 mp?

A: DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller has a 12 megapixel quad bayered sensor that is capable of taking 48 megapixel photos.

Q: 2. Where can we buy the mount to connect the hand unit to the DJI monitor, as it is a key piece of gear, yet it seems unavailable?

A: At this time, DJI has not yet released the mount for the DJI Focus Pro Hand Unit in the DJI Focus Pro All-In-One Combo in order to mount the DJI High-Bright Remote Monitor.

Q: 3. hand control unit can control FIZ but how does autofocus work on a zoom where focal length deviates from set focal length?

A: The DJI Focus Pro All-In-One Combo can only be used with manual lenses that have mechanical endpoints. If it is a prime lens, it will only support lenses up to 100mm. If it is a zoom lens (parfocal), like a 24-135mm focal length lens, calibration would be required at the 24mm focal length before being used.

Q: 4. is video of flight stored on drone, or in controller, or both?

A: The DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller records video files onto a microSD card on the drone itself, but you can also record lower-quality screen captures on the controller that can be saved to a microSD card in the controller. 

Q: 5. I see it says it will work with RS 3 & RS 4 Pro gimbals, but will it still work with the RS 2?

A: No, the DJI Focus Pro All-In-One Combo is not compatible with the DJI RS2 Pro Gimbal Stabilizer.

Q: 6. Can you change the lidar from 30 frames a second

A: At this moment we are not aware that the DJI Lidar sensor capture rate can be changed.

Q: 7. Can the motor and hand unit be used without the grip and lidar?

A: Yes, the DJI Focus Pro All-In-One Combo can be used without the Grip,and Lidar. The motor could be powered by the Gimbal and the Handwheel connects to the motor wirelessly.

Q: 8. DJI Focus Pro Grip can i connect it wireless to the system so i am able to select subject tracking and focus + start recording ?

A: Yes, with supported cameras the grip would control focus and start/stop from the handle. The Handle would also power a servo motor. Lidar Pro as well. It is designed to only work with products in the DJI ecosystem. We would suggest working with the DJI Focus Pro Hand unit and Hi Bright monitor B&H # DJHBRM or DJI Transmission with High-Bright Monitor Combo BH #DJTRC for wireless control. Camera compatibility: https://bhpho.to/49Y7ET4

Q: 9. Will this handle work with the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals BH #TITGAARG?

A: The DJI Focus Pro Grip of the DJI Focus Pro All-In-One Combo can mount onto the NATO mounting points of the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals, but the grip is designed to be connected directly to the focus motor and may not be a functional setup.

Q: 10. Is this system compatible with the prior motors (RS motors), the prior LIDAR unit, or the Cable hub?

A: DJI has not released compatibility information on the DJI LiDAR Range Finder or the DJI RS Focus Motor (2022). We will update this question as soon as this info is released.