Whether you are a gamer, designer, or video editor, the Fractal Design Torrent Mid-Tower Case offers you enhanced cooling capabilities within a sleek and stylish case that is eye-catching yet modest. Sporting a mid-tower design, the Torrent can hold a wide range of motherboards including E-ATX, ATX, micro-ATX, and mini-ITX, as well as SSI-EEB and SSI-CEB form factors. Two 3.5" and four 2.5" drive bays can house your hard-disk and solid-state drives while ensuring accessibility, allowing you to easily scale your storage solution depending on your needs. The Torrent can hold graphics cards up to 18.1 inches and offers seven expansion slots, allowing you to easily install high-end GPUs without worry. Two 180mm and three 140mm fans come pre-installed on the front and bottom of the Torrent, respectively, and the case supports radiators up to 420mm. Additionally, you can connect your external devices such as storage drives and controllers with two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port, and one 3.5mm combo audio jack conveniently located on the top of the case.

E-ATX, ATX, M-ATX & M-ITX Support    2 x 3.5" Bays    4 x 2.5" Bays    7 x Expansion Slots    1 x USB 3.2 Gen 2 Type-C Port    2 x USB 3.2 Gen 1 Type-A Ports    2 x 180mm, 3 x 140mm Fans Included    Supports Radiators up to 16.5"    Support for Graphics Cards up to 18.1"    Light Tint Tempered Glass Panel

Designed to provide enhanced cooling performance, the Torrent offers a streamlined design featuring two 180mm fans that pull air along with three 140mm fans located at the bottom of the case. Together, these fans provide cooling capabilities for your components and can be controlled with the included fan hub. Additionally, you can readjust the fans to your preference, allowing you to set various push-pull configurations suitable to your needs.

A unique layout allows the Torrent to ensure your components are breathing properly. An extra-large bottom fan support offers GPU cooling while the rest of the case can accommodate radiators up to 420mm and even custom water-cooling loops.

Front and bottom dust filters reduce air particles and debris from gathering on the inside of your case. A dedicated cable management space includes several external cable straps so you can manage your wires neatly. The tool-less design makes installing components easy, which saves you time and tools needed to complete your build.

This particular Torrent model includes an array of RGB lighting effects found within the front and bottom fans, allowing you to customize various effects that can be managed with select motherboard models.

This particular Torrent model includes solid side panels instead of tempered glass, giving users a traditional style case.

The tempered glass side panel protects your system while giving you a window to view your creation. The PSU shroud is equipped with ARGB lighting, allowing you customize your style.

Related Questions and Answers

Q: 1. How do I set the start DMX channel? It seems to default to channel 1 as the start with no way to change to another number. I tried the app also but no DMX settings in there. (I have several of these I purchased from you but the manual doesn't say and I cannot find the information online!). Thank You!

A: This is a copy of the manual. If you have any other concerns please contact Savage directly. DMX Operation Connect the DMX output to the Savage RGB Pro Panel and turn the panel on. The panel should automatically detect the controller and switch to DMX mode. The panel display will say: “DMX 512 with RGB..” Below the readout, the channel information will display. Channel 1: Center Channel 2: Red Channel 3: Green Channel 4: Blue The DMX512 will default to channel one, but four channels are supported. Set channel one to any number above zero (we recommend the 50% position). The panel’s functions supported in DMX mode are RGB, hue/saturation/intensity and CCT. Red, green and blue can now be controlled individually. To change modes. Press the “Menu/Intensity” button one time. The menu will display the following: DMX 1/SW 2/R 3/G 4/B 1/SW 2/I 3/S 4/H 1/SW 2/BRI 3/CCT The number before each letter is the channel number for the selected function. The first line is the RGB mode and when selected will allow the user to make red, green and blue adjustments. The second line allows the user to adjust the intensity, saturation and hue of the selected color. The third line allows the user to switch to CCT mode. To change modes, rotate the “Menu/Intensity” clockwise until the desired mode is highlighted. Press the “Intensity/Menu” button again and the light will switch to the selected mode and be controllable with the DMX contro

Q: 2. No, I meant how do you physically control the light? Is it there just a snap grid that is offered, or are there barn doors?

A: To physically control the Nanlite PavoSlim 120C RGB LED Panel there are knobs on the controller, pictured at this link https://bhpho.to/3Gyw3li. There are no barndoors made for this light. The light does come with modifiers that include, Lite Diffuser, Standard Diffuser, Eggcrate and Softbox.

Q: 3. What is the 60c case dimensions? I would like to know if I can fit two of these cases into a Peli Air 1615 hard case for travel?

A: Two of the Nanlite PavoSlim 60C RGB LED Panels (with each in their own case) would not fit into the Pelican 1615AirTP Wheeled Hard Case. The dimensions of the case for the 60C are approximately 15 x 15 x 7.5".

Q: 4. what is the power draw of this fixture?

A: The Nanlite PavoSlim 120C RGB LED Panel BH #NAPS120C is a 120w light.

Q: 5. Is the joystick 4-way or 8-way?

A: This is not a typical joystick with forward, back, left, right motion. It is a realistic front loader stick. The loader stick controls vertical, horizontal, and twist axes, while a mode switch on top of the stick doubles those commands, giving you six axes.

Q: 6. What is the power output on this lights?

A: The Nanlite PavoSlim 120C RGB LED Panel BH #NAPS120C is rated for 12,830 LUX at 1 meter.

Q: 7. does this work with construction simulator?

A: No, Construction Simulator is not compatible with the Logitech G Heavy Equipment Side Panel.

Q: 8. Hi, will this work with United kingdom electricity supply? Thank you.

A: The power supply for the Sprite 40 RGB is multi-voltage so the light can be used in the UK.

Q: 9. Is there enough brightness for using it as a key or main light?

A: Yes, the Nanlite PavoSlim 60C RGB LED Panel does have enough output to be used as a key light for interviews or photography.

Q: 10. Does the Memories work with Non gaming standard Pc or Mac applications ? like comy/paste/play files..etc??

A: The Heavy Equipment side panel is compatible with simulators in addition to games on Mac and PC's, such as a Flight Simulator. It will not work for standard computer functions that can be used when not using a specific software like copy/paste and stop/start for video.e