Filmmakers get more control over what they capture with this Mavic 3 Pro Drone Fly More Combo with DJI RC Pro from DJI. This flagship drone adds a third lens to the system with the 70mm f/2.8 medium telephoto to enhance your creative possibilities with more control of how much you capture of a subject and its surroundings. Remaining are the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, which has been upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe, even for beginner pilots.

3-Axis Gimbal with Tri-Camera System    20MP 5.1K Wide-Angle 4/3 CMOS Hasselblad    166mm 12MP 7x Zoom Telephoto    70mm 48MP 3x Zoom Medium Telephoto Lens    7 Intelligent Flight Modes    Up to 43 Minutes of Flight Time    O3+ Transmission with a 9.3-Mile Range    Omnidirectional Avoidance with APAS 5.0    D-LOG, D-LOG M & HLG Post Processing    Fly More Combo & DJI RC Pro Remote

• 24mm Hasselblad Wide-Angle: The 20MP Hasselblad camera remains, with its adjustable f/2.8 to f/11 aperture and large 4/3 CMOS sensor for reduced noise in low-light situations. It offers 5.1K video resolution at 50 fps and incorporates the Hasselblad Natural Color Solution (HNCS) to capture and produce true-to-life colors in your media. When post-processing, you can use D-Log, D-Log M, and HLG.
• 70mm Medium Telephoto: The new camera in the tri-cam system, this 48MP lens offers an f/2.8 aperture and 1/1.3" CMOS for excellent day and night shots. Video is captured in 4K at 60 fps, and you can get clearer midrange shots with a 3x optical zoom. D-Log M and HLG are supported for efficient post-production, and it's capable of taking advantage of Night, ActiveTrack, and Hyperlapse shooting modes.
• 166mm Telephoto: This 12MP full telephoto lens returns, but with an updated aperture of f/3.4, letting more light in for better low-light performance using its 1/2" CMOS. It also improves its 4K fps from 30 to 60 for smoother video and incorporates a 7x optical zoom for clear close-ups.

An omnidirectional obstacle sensing system with APAS 5.0 technology actively detects obstacles during flight and will automatically plot safe routes around them during flight.

• Waypoint Flight
• Cruise Control
• Hyperlapse
• MaserShots
• FocusTrack
• Panorama
• QuickShots

Wide, Medium Telephoto & Telephoto Lenses

• Normal (8-bit 4:2:0): H.264 & H.265
• HLG/D-Log M (10-bit 4:2:0): H.265

Wide Lens

• D-Log (10-bit 4:2:0): H.264 & H.265

• Up to 43 minutes of flight time
• O3+ video transmission from up to 9.3 miles away
• Supports optional DJI Goggles 2, Goggles Integra, and RC Motion 2 for a more immersive flight experience

Related Questions and Answers

Q: 1. Can I use a microSD 512 and which is recommanded ?

A: Yes, the DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller can be used with a 512GB microSD card. A recommended card would be the SanDisk 512GB Extreme UHS-I microSDXC Memory Card with SD Adapter, BH #SA512GBEMSD.

Q: 2. Can you have LiDAR focus overlays on the high bright monitor without the bracket to connect the the fiz hand unit to monitor?

A: No, DJI Focus Pro Hand Unit from the DJI Focus Pro All-In-One Combo or the DJI Wireless Video Transmitter (BH #DJVDC) would have to be connected to the DJI High-Bright Remote Monitor in order for the Lidar to communicate with the monitor.

Q: 3. hand control unit can control FIZ but how does autofocus work on a zoom where focal length deviates from set focal length?

A: The DJI Focus Pro All-In-One Combo can only be used with manual lenses that have mechanical endpoints. If it is a prime lens, it will only support lenses up to 100mm. If it is a zoom lens (parfocal), like a 24-135mm focal length lens, calibration would be required at the 24mm focal length before being used.

Q: 4. Can I use my DJIRC Pro to fly this?

A: Unfortunately no. The DJI RC Pro controller is not compatible with the DJI Mini 4 pro.

Q: 5. Where is the link for the new DJI Focus Pro LiDAR to DJI Transmission Cable Hub? That’s need to hook up the transmission system?

A: There are a few products that were sent to influencers that have yet to be released by DJI. Both the new cable hub and the DJI Hi Bright Monitor mount have not been released as products from DJI. We do not have a timeframe when they will be available.

Q: 6. Will this handle work with the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals BH #TITGAARG?

A: The DJI Focus Pro Grip of the DJI Focus Pro All-In-One Combo can mount onto the NATO mounting points of the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals, but the grip is designed to be connected directly to the focus motor and may not be a functional setup.

Q: 7. Can the Focus Pro Hand Unit control the lidar unit, or is it only the Grip which can do this? If so, how is lidar info displayed

A: The DJI Lidar Pro is powered and controlled with the DJI Hand grip only. The Grip has a small display for setup and control as well as setting focus points..

Q: 8. What are the latest accessories need to get this work with the transmission system?

A: The DJI Focus Pro All-In-One Combo and DJI Transmission with High-Bright Monitor Combo currently do not integrate.

Q: 9. Can the motor and hand unit be used without the grip and lidar?

A: Yes, the DJI Focus Pro All-In-One Combo can be used without the Grip,and Lidar. The motor could be powered by the Gimbal and the Handwheel connects to the motor wirelessly.

Q: 10. Can you change the lidar from 30 frames a second

A: At this moment we are not aware that the DJI Lidar sensor capture rate can be changed.