Bring flexible cooling and storage to your build with the North Mid-Tower Case in chalk white from Fractal Design. Supporting ATX, Micro-ATX, and Mini-ITX motherboards, this case supports up to three 2.5/3.5" drive bays and comes with two; each drive bay can be used to install a 2.5 or 3.5" drive, or both simultaneously. Additionally, two 2.5" drives can be mounted behind the motherboard tray. Seven expansion slots provide space for adapter cards, including GPUs up to 13.9". PSUs up to 10" are also supported, along with CPU coolers up to 6.7".

Two preinstalled 140mm fans provide efficient cooling right out of the box. A total of six 140mm or eight 120mm fans can be installed using the included fan hub and bracket. Or, install radiators up to 240 and 360mm at the top and front of the case, respectively. Featuring oak wood slats and an open front, this case utilizes a steel frame and mesh side panel. A front I/O panel sports a USB-C 3.1 Gen 2 and two USB-A 3.0/3.1 Gen 1 ports, audio input and output jacks, and steel hardware accents.

ATX, Micro-ATX, and Mini-ITX Support    Steel Frame & Mesh Side Panel    2 x 2.5/3.5" Drive Bays    2 x 2.5" Drive Mounts    7 x Expansion Slots    USB-C 3.1 Gen 2, 2 x USB-A 3.1 Gen 1    2 x 140mm Fans Included    Support for Liquid Cooling Systems    Supports GPUs up to 13.9"    Supports PSUs up to 10"

Enhance your gaming station with real wood slats on the front of the case, as well as a faux leather tab and steel hardware accents.

Get efficient cooling with two preinstalled 140mm fans or install radiators up to 240 and 360mm at the top and front of the case, respectively. This case supports GPUs up to 13.9" with front fans installed, or up to 11.8" with a 360mm radiator installed. Additionally, seven bridgeless expansion slots allow for extensive customization.

Get easy access to internals by removing the side panels, unclipping the front, and popping off the top panel using an integrated tab.

Up airflow and cooling potential via an open front and a mesh top and side panel.

• Use the two included 2.5/3.5" drive bays to install two 2.5" and two 3.5" drives simultaneously
• Mounting points provide space for a third drive bay, available separately
• Two dedicated 2.5" drive mounts behind the motherboard tray provide room for even more storage

Make the most of your building experience with an intuitive interior layout. Two 140mm fans come preinstalled and the case fits a total of six 140mm or eight 120mm fans using the included fan hub and bracket.

Doubling the speed of its predecessor, USB 3.1 Gen 2 features a maximum throughput of 10 Gb/s when used with compatible devices and is synonymous with USB 3.2 Gen 2.

Related Questions and Answers

Q: 1. Does it work with Elite: Dangerous?

A: Hi Natalie! The Heavy Equipment Panel is s compatible with all major farm simulation software and even non-farm games including Euro Truck, Train Simulator and Elite Dangerous.

Q: 2. When using this in RAW (mid and side recorded separately, to balance later in post, rather than blending while recording) on the H5, can the H5 still record a second back-up track at reduced gain? From the little I've read on the tech of mid-side, I'm thinking it could work: capsule's stereo file 1 of 2 is mono-mid on left channel and mono-side on right channel, leaving capsule's stereo file 2 of 2 to record same at -12dB. Good guess, or wishful thinking?

A: Yes!

Q: 3. for older Android devices, is there a usb-c to 3.5mm adapter available?

A: Unfortunately, you cannot convert the digital USB-C output to a 3.5mm TRRS analog connection to make this mic work with other smartphones. I would recommend a mic with a 3.5mm TRRS connection, such as the Comica Audio CVM-VM10-K1 Camera-Mount Shotgun Microphone with Grip Handle for Smartphones, BH #COCVMVM10K1.

Q: 4. does this work with construction simulator?

A: No, Construction Simulator is not compatible with the Logitech G Heavy Equipment Side Panel.

Q: 5. Does the joystick control PTZ pan tilt and zoom?

A: Yes it does with an ATEM that supports VISCA or out SDI Protocol

Q: 6. Does it work with an xbox1

A: It is not compatible with the XBOX ONE.

Q: 7. Can this work with iPhone 15 pro ?

A: No the Zoom Am7 Mid-Side Stereo Microphone is made for compatibility with Android Devices with USB-C Connector.

Q: 8. Does this, like the Zoom SSH-6 Stereo Shotgun Microphone Capsule, allow the H5 to record in RAW, to allow mid-side balance in post?

A: Yes!

Q: 9. I avoided early BMD switchers due to fan noise (it'll be in the auditorium, not a separate control room.) Is this still an issue with these newer units?

A: The Atem Switchers still have fans and can be positioned away from the area where you work using the Blackmagic Design ATEM 1 M/E Advanced Panel. The Panel is a just controller for the Atem Switcher model and would be silent.

Q: 10. The new iPhones and iPads use a usb-c connecter. So won't this work, or is it an OS peoblem?

A: The Zoom Am7 Mid-Side Stereo Microphone for Android Devices with USB-C Connector (BH # ZOAM7) is not compatible with iPhones or iOS.