Filmmakers get more control over what they capture with Mavic 3 Pro Drone with Fly More Combo & DJI RC from DJI. This flagship drone adds a third lens to the system, with a 70mm f/2.8 medium telephoto, enhancing your creative possibilities with more control of how much you capture of a subject and its surroundings. Remaining is the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, which has been upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe for even beginner pilots.

3-Axis Gimbal with Tri-Camera System    20MP 5.1K Wide-Angle 4/3 CMOS Hasselblad    166mm 12MP 7x Zoom Telephoto    70mm 48MP 3x Zoom Medium Telephoto Lens    7 Intelligent Flight Modes    Up to 43 Minutes of Flight Time    O3+ Transmission with 9.3-Mile Range    Omnidirectional Avoidance with APAS 5.0    D-LOG, D-LOG M & HLG Post-Processing    Fly More Combo & DJI RC Remote

• 24mm Hasselblad Wide-Angle: The 20MP Hasselblad camera remains, with its adjustable f/2.8 to f/11 aperture and large 4/3 CMOS sensor for reduced noise in low-light situations. It offers 5.1K video resolution at 50 fps and incorporates the Hasselblad Natural Color Solution (HNCS) to capture and produce true-to-life colors in your media. When post-processing, you can use D-Log, D-Log M, and HLG.
• 70mm Medium Telephoto: The new camera in the tri-cam system, this 48MP lens offers an f/2.8 aperture and 1/1.3" CMOS for excellent day and night shots. Video is captured in 4K at 60 fps, and you can get clearer midrange shots with a 3x optical zoom. D-Log M and HLG are supported for efficient post-production, and it's capable of taking advantage of Night, ActiveTrack, and Hyperlapse shooting modes.
• 166mm Telephoto: This 12MP full telephoto lens returns, but with an updated aperture of f/3.4, letting more light in for better low-light performance using its 1/2" CMOS. It also improves its 4K fps from 30 to 60 for smoother video and incorporates a 7x optical zoom for clear close-ups.

An omnidirectional obstacle sensing system with APAS 5.0 technology actively detects obstacles during flight and will automatically plot safe routes around them during flight.

• Waypoint Flight
• Cruise Control
• Hyperlapse
• MaserShots
• FocusTrack
• Panorama
• QuickShots

Wide, Medium Telephoto & Telephoto Lenses

• Normal (8-bit 4:2:0): H.264 & H.265
• HLG/D-Log M (10-bit 4:2:0): H.265

Wide Lens

• D-Log (10-bit 4:2:0): H.264 & H.265

• Up to 43 minutes of flight time
• O3+ video transmission from up to 9.3 miles away
• Supports optional DJI Goggles 2, Goggles Integra, and RC Motion 2 for a more immersive flight experience

Related Questions and Answers

Q: 1. What are the latest accessories need to get this work with the transmission system?

A: The DJI Focus Pro All-In-One Combo and DJI Transmission with High-Bright Monitor Combo currently do not integrate.

Q: 2. Is this system compatible with the prior motors (RS motors), the prior LIDAR unit, or the Cable hub?

A: DJI has not released compatibility information on the DJI LiDAR Range Finder or the DJI RS Focus Motor (2022). We will update this question as soon as this info is released.

Q: 3. Where can we buy the mount to connect the hand unit to the DJI monitor, as it is a key piece of gear, yet it seems unavailable?

A: At this time, DJI has not yet released the mount for the DJI Focus Pro Hand Unit in the DJI Focus Pro All-In-One Combo in order to mount the DJI High-Bright Remote Monitor.

Q: 4. Does this kit come with the battery for the hand unit? Or is this something we need to buy extra?

A: The DJI Focus Pro Hand Unit included in the DJI Focus Pro All-In-One Combo does not come with a battery included. An NP-F550 battery such as the Watson NP-F550 Lithium-Ion Battery Pack (7.4V, 2200mAh), BH #WANPF550, would be necessary to operate the hand unit.

Q: 5. Can the motor and hand unit be used without the grip and lidar?

A: Yes, the DJI Focus Pro All-In-One Combo can be used without the Grip,and Lidar. The motor could be powered by the Gimbal and the Handwheel connects to the motor wirelessly.

Q: 6. Where is the link for the new DJI Focus Pro LiDAR to DJI Transmission Cable Hub? That’s need to hook up the transmission system?

A: There are a few products that were sent to influencers that have yet to be released by DJI. Both the new cable hub and the DJI Hi Bright Monitor mount have not been released as products from DJI. We do not have a timeframe when they will be available.

Q: 7. Will this handle work with the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals BH #TITGAARG?

A: The DJI Focus Pro Grip of the DJI Focus Pro All-In-One Combo can mount onto the NATO mounting points of the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals, but the grip is designed to be connected directly to the focus motor and may not be a functional setup.

Q: 8. Is there an accessory just to output the video feed with the lidar depth map to a bigger monitor? Without rigging transmission….

A: Currently the DJI Focus Pro LiDAR depth map of the DJI Focus Pro All-In-One Combo is only available when used in conjunction with the DJI Transmission with High-Bright Monitor Combo, BH #DJTRC.

Q: 9. Is there longer cables that work with the motors and lidar? USB-c has much longer options but they do not seem to work

A: At this moment we do not have longer cable options for the DJI Focus Pro All-In-One Combo.

Q: 10. Can we use the Focus pro with non hard hard-stop lens ?

A: No, DJI recommends only using lenses with hard stops like Cinema Lenses when using the DJI Focus Pro All-In-One Combo.