The Tiffen 3 x 3" CC10M Magenta Filter is a color compensating (or color correction) filter for use when making color balance adjustments. It can be used to alter the color balance of a scene by placing in front of a light source or the lens of your camera. It can also be used to apply color corrections when used in the darkroom with an enlarger or to help pre-visualize color adjustments when viewing prints.

Magenta is the opposite of green and can be used to reduce green tones or casts within a scene or print. This magenta CC10 is more dense than a CC05 filter and less dense than a CC20 filter, and requires a 0.3 stop compensation for normal exposure results.

Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 3 x 3" / 76.2 x 76.2mm.

Color Compensating Filter    Achieve Proper Color Balance    Also for Printing and Viewing Use    ColorCore Technology

Magenta color compensating filter for use when making color balance adjustments.

Magenta is the opposite of green and is added to reduce green tones or color casts within a scene or print.

Related Questions and Answers

Q: 1. Can the Leica Q lens hood still be used when this filter is mounted on the lens?

A: Ye it can. There is ample clearance provided.

Q: 2. Will it fit a Z series filter holder?

A: The Ruggard 5-Pocket Filter Pouch is designed to hold filters up to 4 x 6" with 5 pockets for each filter, which would make for a tight fit for the Cokin Z-Pro Series Filter Holder (B&H # COFHZP). The filter holder can be attached behind the case with the Velcro strap. Alternatively, the Ruggard Protective EVA 10-Pocket Filter Case (Up to 4 x 6"), B&H # RUFCV3108B should allow for the filter holder and filters to fit. Then there is the Haida Case for M10-II Filter Holder (B&H # HAHD4708) that should work for the filter holder alone.

Q: 3. How wide is the webbing that makes up the belt loop on the back? Would it slide through a MOLLE loop?

A: The belt loop is too wide for a Molle loop.

Q: 4. how many 2mm shims come with this set?

A: The ARRI Impression V Filter Kit comes with 3x LPL 2mm mount shims.

Q: 5. How many shims are in this kit?

A: The ARRI Impression V Shim Pack contains: 3 x 2mm LPL shims 3 x 1.85mm LPL shims 3 x 1.95mm LDS shims 24 x TX 6 screws

Q: 6. Will Leica E82 UVa II Filter fit Fujinon GF Lens 45-100mm?

A: Yes, the Leica E82 UVa II Filter is compatible with the FUJIFILM GF 45-100mm f/4 R LM OIS WR Lens.

Q: 7. Does the filter Leica E43 UVa II fits the Summilux type 2 E43 lens? I know that the filter thread is normally 0.5mm on this lens, however the filters from BW 010M are supposed to be 0.75 and they fit the lens. Thank you!

A: Leica filters fit Leica lenses !

Q: 8. Can I stick a filter without a lid in this? Or can it get scratched?

A: Yes, you can. There are soft dividers on the inside separating the filters, so you can put them inside without a hard case.

Q: 9. Is the 49 the correct filter for the Q2 monochrom (with the hood attached)?

A: Yes, the Leica E49 UVa II Filter (Black) is compatible with the Leica Q2 Monochrom Digital Camera with the lens hood attached.

Q: 10. I assume reduction rings can be used to adapt this to lenses with smaller diameters, correct?

A: One would typically use the appropriate size ring from the following set to adapt the Tilta Lightweight Filter Clamp-On Adapter (B&H# TIMBT16LFA) for use with lenses having smaller diameters: SmallRig Matte Box Adapter Ring Kit for Mini Matte Box (52/55/58/62/86-95mm) (B&H# SM3383) https://bhpho.to/31JCKQn