The Tiffen 86mm CC10M Magenta Filter is a color compensating (or color correction) filter for use when making color balance adjustments. It can be used to alter the color balance of a scene by placing in front of a light source or the lens of your camera. It can also be used to apply color corrections when used in the darkroom with an enlarger or to help pre-visualize color adjustments when viewing prints.

Magenta is the opposite of green and can be used to reduce green tones or casts within a scene or print. This magenta CC10 is more dense than a CC05 filter and less dense than a CC20 filter, and requires a 0.3 stop compensation for normal exposure results.

Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, then mounting to precision metal rings.

CC10M Color Compensating Filter    1.2x Filter Factor, +0.3    Achieve Proper Color Balance    Alter Color Balance    Useful for Printing and Viewing    ColorCore Technology    86mm Front Filter Threads    Plastic Case

Magenta color compensating filter for use when making color balance adjustments.

Magenta is the opposite of green and is added to reduce green tones or color casts within a scene or print.

This filter has a nominal peak density of 0.10, and a 1.2x filter factor, requiring a 0.3 stop compensation.

Plastic filter case for storage and transport.

Related Questions and Answers

Q: 1. Can this lens be used for all Fuji?

A: The Leica E49 UVa II Filter would be compatible with all lenses that have 49mm filter threads on the front of the lens. Fujifilm lenses come with a variety of different filter thread sizes, so the Leica E49 UVa II Filter will not fit on all Fujifilm lenses. Check the filter thread size used on the lens you own or plan to purchase to ensure it uses 49mm filters.

Q: 2. Is this filter fora Leica Q camera?

A: Hi, Marina. I believe your Q would take an E49. The E39 is for M lenses.

Q: 3. Will it fit a Z series filter holder?

A: The Ruggard 5-Pocket Filter Pouch is designed to hold filters up to 4 x 6" with 5 pockets for each filter, which would make for a tight fit for the Cokin Z-Pro Series Filter Holder (B&H # COFHZP). The filter holder can be attached behind the case with the Velcro strap. Alternatively, the Ruggard Protective EVA 10-Pocket Filter Case (Up to 4 x 6"), B&H # RUFCV3108B should allow for the filter holder and filters to fit. Then there is the Haida Case for M10-II Filter Holder (B&H # HAHD4708) that should work for the filter holder alone.

Q: 4. Do you think it would be possible to cram two B+W Plastic Filter Case D's (MFR # 65-1071524) inside it (so that it has extra dust/scratch protection in the plastic case, and additional padding protection from the Ruggard Pouch)?

A: I'm going to say probably not. Looking at the specs of the plastic case, and the way this pouch is made, I highly doubt even one would fit. This pouch has 4 slots tat hold up to 82mm, but the slot dividers are stitched together, then stitched inside the pouch, making it a snug fit just for filters. I took a photo to show you, but I don't know how to post it.

Q: 5. Do these have to be used with signatures or can we use third party lenses like cooke optics?

A: The ARRI Impression V Filter Kit is designed specifically to work with Arri ARRI Signature prime or zoom lenses.

Q: 6. What are the approximate dimensions please?

A: 4 inches in diameter

Q: 7. Will OCF II filters work with the OCF starter kit holder?

A: The Profoto OCF II Filter attaches to the light via, Attaches to OCF II Grid and Gel Holder, Attaches with Magnets and Attaches to OCF II Barndoor

Q: 8. Will this perfectly fit the NT-USB Mini? That product is definitely not the same same size as any of the listed models.

A: No. The Rode WS2 Pop Filter / Wind Shield is built to fit NT1-A, NT2-A, NT1000, NT2000, NTK, K2, PodMic, and Broadcaster Microphones. It is not compatible for use with the NT-USB Mini. Rode does not offer a windscreen for the NT-USB Mini. Instead, you can use a pop filter such as the Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and Booms (B&H # AUPFNY6).

Q: 9. It says there are three 4x5.65 filters but it also mentions an ultra circular polarizing filter. I only see 3 square filters in the photo. Does this kit include a circular polarizing filter?

A: The filter on the right is a polarizing filter and rotates in a filter holder to achieve the polarizing effect.

Q: 10. how many 2mm shims come with this set?

A: The ARRI Impression V Filter Kit comes with 3x LPL 2mm mount shims.