The Auray WLF Series Foam Windscreens are designed to reduce unwanted vocal pops and broadband wind noise with minimal high frequency loss.

This WLF-038-3 Foam Windscreen is designed for use with headset, podium and lavalier mics with a 3/8" diameter. The density of the specialty acoustic foam is optimized to help protect the microphone element from air bursts without muffling the sound.

Whether used on headset, podium or lavalier microphones, these windscreens are effective in minimizing wind noise and plosive sounds. They are most effective in calm to light breeze conditions (0-7mph), and can be used indoors for protection against drafts caused by air-conditioners. Users can generally expect a notable reduction in wind noise, with very slight dampening of high frequencies. For most applications, this is a worthwhile exchange.

The WLF-038-3's foam is hypoallergenic and helps prevent moisture and dirt from damaging your microphone. The windscreens are designed to fit microphones from AKG, Audio-Technica, Audix, Beyerdynamic, Electro-Voice, Sennheiser, Sony, Shure and others.

The WLF-038-3 Foam Windscreens for 3/8" Diameter Microphones are an effective solution for basic wind protection.

High-Quality Acoustic Foam    Reduces Vocal Plosives    Reduces Wind Noise    Protects Mic from Moisture and Dirt    For Microphones 3/8" in Diameter

Sony ECM44, ECM55, ECM66, ECM166

Sennheiser MKE40, MKE60

Shure EZG, EZO, MX183, MX184, MX185, MX412, SM83, SM84, SM98, SM99, 839W

Electro-Voice CH230, Co90, Co94, Co100, CP212, CP281, CS200, RE98

Beyerdynamic MCE10, MCE52, SHM22, SHM88

Audix ADX20, ADX112, ADX118

Audio Technica AT803B, AT853, AT855, AT857, AT859, ATM35

AKG C567, CK970

Related Questions and Answers

Q: 1. If I'm going to be mounting the AT875R on the camera, not holding it, is there any advantage to using foam cover as apposed to just one of these, or would this do for everything?

A: This is a few years after the original question, but the dynamics are still the same for anyone else wondering if these higher-end dead cats are worth the extra few bucks. YES, there is an advantage over every other option out there, including the lesser-priced ones that are really only the fuzzy part and retrofit over your existing foam windshield. Look at the picture of the cutout on the Auray professional windscreen. See the webby network of nondescript "whatever that is" between the outside of the dead cat (IE the fuzzy exterior) and the microphone itself? THAT is what keeps the wind out. It is made of a pliable plastic, and because of its jumbled weave, it cuts the path of the wind from as many directions as you see "jumbles." In my experience, the fluffy exterior helps more with cutting plosives and with sibilance. Let's put it this way, when I want clean audio, these professional windscreens are what go on my microphones. When I NEED a video that requires an audio sync with wind (a close of leaves blowing, etc), I will record two tracts: one mic with the professional windscreen for clean audio, and the second mic with the mic-kit "foam" one, so I will have "just enough" wind noise to match the scene!

Q: 2. What foam windscreen is needed for this to work with a ECM77b?

A: Use this furry windbuster with this foamy: Auray Foam Windscreens for 1/4" Diameter Microphones (3-Pack) B&H # AUWLF0143 https://bhpho.to/36vFYY3

Q: 3. Does it work with ntg4 + ?

A: Yes. See below dimensions ( the depth spec does work, as 7.1 " is more than enough to cover the mic element / side vents. Auray WSS-2018 Specs Compatible Mic Diameter 0.75 to 0.9" / 19 to 23 mm Inner Depth 7.1" / 18 cm Rode NTG 4+: Physical Color Black Mounting 3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware) Construction Material Metal Dimensions ø: 0.87 x L: 10.94" / ø: 22 x L: 278 mm Weight 6.21 oz / 176 g (Microphone)

Q: 4. Will this fit a Sennheiser MKE 600?

A: Yes, this should fit the MKE600.

Q: 5. Does does fit senal mc24 shotgun mic?

A: Yes, the Auray Professional Windshield for Shotgun Microphones (7") is compatible with the Senal MC24-EL Long Shotgun Microphone.

Q: 6. its compatible whit dpa4017b?

A: Yes, the Auray WSS-2014 is compatible for use with the DPA 4017B shotgun microphone.

Q: 7. will this fit SonicPresence SP15 PRO On-Ear XLR Binaural Microphone for Spatial Audio?

A: The Auray Fuzzy is made to fit over a foam windscreen, so you would first need to use a compatible foam windscreen and then put the Auray Fuzzy over that.

Q: 8. Does this fit the NTG-4?

A: Yes, the Auray WSS-2014 Professional Windshield for Shotgun Microphones does fit on the Rode NTG4 Shotgun Microphone.

Q: 9. Does it work with Rode ntg2?

A: For proper fitment to the Rode NTG-2 we recommend the WSS-2014

Q: 10. Is this suitable for a 416 t

A: It works quite well!