The teal Custom 2" Camera Strap from Souldier is fully adjustable from 36 to 63" at four points-two on the strap body and two on the ends of the black webbing that back threads to your camera's strap lug. The strap is made from a cotton/polyester fabric blend on front with a backing of recycled seat belt material. It includes all silver hardware. The strap can be worn either cross body style or over your shoulder. The teal Custom 2" Camera Strap is handmade in the USA and backed by Souldier's limited lifetime warranty against defects.

Strap Width: 2.0"    Adjustable Length: 36 to 63"    Recycled Seat Belt Backing Material    Cotton/Polyester Fabric Blend    Includes Silver Hardware    Adjustable at Four Points    Two Slides on Strap, Two on Webbing    Attachment Loop Connects to Camera Lug    Wear Cross Body or Over the Shoulder    Handmade in the USA

Related Questions and Answers

Q: 1. Where are the included rubber washers supposed to go?

A: The rubber washers are there to protect the threading on the screws.

Q: 2. Is Vello 1.5' TTL cable long enough for 5Dmk3 with camera grip with this bracket?

A: I use this with the original 5D, with battery grip. I have a cable that is about that length and find that plenty.

Q: 3. I shoot with D750 and primarily 24-120mm f/4G, 50mm 1.8g, 85mm 1.8g along with SB-800 flash/cord. Does this cause any flare? If you bounce the flash upwards on horizontal, do you experience shadows? Also do you experience shadows in vertical position? I use the regular Custom Brackets but want something smaller simply to avoid shadows.

A: I use the Mini-RC with a 24-70 lens. My subjects are usually 6 to 8 feet away.I don't get any flare when using the bracket. But I do get thin hard shadows behind my subjects on any walls or structures behind my subject.

Q: 4. Will this mount fit on my Sony A6500 ??

A: It will fit but the camera is very small and the bracket is large so will be awkward to use. You also won't have where to hold well in vertical mode. I would recommend buying a battery grip like this one and placing it on the camera. With this grip it will allow you to better use that bracket on the camera. https://www.bhphotovideo.com/c/product/1335221-REG/vello_bg_s5_battery_grip_for_sony.html

Q: 5. Will this work with the extension grip?

A: Unfortunately, no.

Q: 6. Is there a left-handed version of this bracket? I would prefer to have the flash on the left, so I can adjust it as needed while taking photos with my right hand. I love the small profile this bracket creates.

A: Pretty sure right-side is the only version made. I don't remember seeing any other options when I was in the market for a bracket. You make an interesting point about not having to take your hand off the grip to change the flash - but this bracket mounts the flash very close to the right side of the lens and I believe that it was on the left side of the lens, one would have issues accessing the zoom and focus rings.

Q: 7. Will this frame mount to Arca Swiss mount?

A: Yes. The L-bracket uses the arca-swiss style on both components.

Q: 8. Can this be mounted on a Canon 5D mark 3 without a grip?

A: I have Nikon and Sons gear so not totally familuar with Canon but as long as there is a centralized standard tripod socket on your Canon the mini CB should mount well. I have an older mini-CB and now the newer model. The newer is more forgiving - so should fit you fine.

Q: 9. Does this bracket allow full unimpeded use of the articulating rear view screen while attached to the RP camera?

A: Yes, you can articulate, open and closed the Canon EOS RP LCD using the Sunwayfoto Custom L-Bracket for Canon EOS RP Mirrorless Camera. The antitwist bar on the bracket allow full articulation and access to all camera ports.

Q: 10. Doe this L-bracket fit the Manfrotto 494 Ball Head? If not, is there an L-bracket for a Canon RP that does fit the 494 ball head

A: Yes, the Sunwayfoto Custom L-Bracket for Canon EOS RP Mirrorless Camera will work with the Manfrotto 494 Ball Head.