The Comprehensive CAT5e 350 MHz Assembly Cable is used in enhanced Category 5 high-speed cabling to distribute data, voice, and video to meet the requirements of advanced fast Ethernet and gigabit computer networks. This cable is 25 feet long and will handle bandwidth-intensive applications of up to 350 MHz. Meeting Cat 5e TIA / EIA standards, it offers lower impedance and structural return loss (SRL) when compared to a standard 100 MHz cable. To keep Near-End Crosstalk levels to a minimum, Comprehensive has designed this cable with a shortened body plug without a boot. Furthermore, it has a blue PVC jacket so you can color code your network installation.

Gold-Plated RJ-45 Connectors    350 MHz Transmission Speed    Exceeds Category 5e Specifications    Reduced Near-End Crosstalk    PVC Jacket    RoHS Compliant

Connector: 50 µ gold-plated RJ-45 male to male

Conductor: 4-pair 24 AWG stranded copper

Jacket: PVC

Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token, Ring (IEEE 802.5); 100 VG-Any LAN, and 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM

Designed for network adapters, hubs, switches, routers, DSL / cable modems, patch panels, and twisted-pair applications

Exceeds Category 5e specifications

Wired: TSB 568B (AT&T 258A)

Certifications: TIA / EIA

Related Questions and Answers

Q: 1. Can this support a canon mark III?

A: Assuming you mean a 5D Mk III I would think so. I currently use it with a 70D w/vertical grip.

Q: 2. Since this says it covers a super35 sensor, is it 25-100mm on a super35 or would there still be a crop factor of ~1.5x (Making it 37.5-150mm)?

A: Yes, The native crop of a S35 sensor is about 1.5x. The view of the Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens would be 37-150mm.

Q: 3. will it work with a GH5? if so, which adapters would be best? speed booster or plain mechanical? being anamorphic w/ rear Anamorphic adapter may have issues with GH5 flange distance and adapter??

A: Please review the following item. Metabones PL Lens to Micro Four Thirds Camera T Adapter (Black) BH #MEMBPLM43BT1 • MFR #MB_PL-M43-BT1 https://bhpho.to/30Hqsr3

Q: 4. Does this include lens support? If not, is it fit screw size with ARRI LS-9?

A: The Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens (PL Mount, Feet) has a thread to accept a 15mm rod lens support like the Axler 15mm Rod Bridge Adapter BH #AXRAB15LWS • MFR #RAB-15LWS

Q: 5. Is the cold shoe mount included with the Stroboframe?

A: Yes, the Stroboframe Quick Flip 350 Bracket includes the cold shoe mount in the box.

Q: 6. How much weigth can this assembly carry / hold?

A: There is no listed weight limit for this adapter. We would however, feel comfortable up to 20 maybe 25 lbs.

Q: 7. Has anyone tried using this with the Tilta Mirage Matte Box? Is there a way to clamp it on or does it only work with rails? I notice it says it has a 95mm thread, but a 100mm front.

A: The Tilta Mirage VND Kit fits on lenses 95mm or smaller. Unfortunately, the Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens is 100mm so the matte box will not fit.

Q: 8. To utilise the 1.33x Anamorphic Rear Adapter or 1.4x Full-Frame Expander on a sony e mount camera. Would it be correct to assume that the adaptors are PL mount, so you would have to keep the lens as PL mount, and buy and additional PL to sony e mount adaptor ?

A: Correct, the anamorphic adapter and full-frame expander are in PL mount only so if you were to use them you would need to adapt from PL to E mount for use with E mount cameras.

Q: 9. will this work with a rolleiflex?

A: The Stroboframe Quick Flip 350 Bracket is 9.5 inches. The camera can not be any taller than 9.5 inches to fit in the bracket.

Q: 10. Does this product include lens support? If not, is it fit with ARRI LS-9?

A: The Venus Optics Laowa OOOM 25-100mm T2.9 Cine Lens (PL Mount, Feet) (B&H# VE25100T29PL) comes with a Y-shaped holder which would typically be attached to a lens support. Depending on how you set it up, yes, it would be possible to use the ARRI LS-9 Lens Support for 19mm Studio Bridge Plate (B&H# ARK2.47227.0) as part of a means of support.