The LUCIA PGI-72 Chroma Optimizer Ink Tank from Canon is compatible with the PIXMA PRO-10 Printer. It features pigment-based ink and Canon's FINE (Full-photolithography Inkjet Nozzle Engineering) technology which ensures accurate ink placement.

For the PIXMA PRO-10 Wireless Professional Inkjet Printer

Related Questions and Answers

Q: 1. Is it machine washable?

A: Yes, the Filmcraft Studio Blanket is machine washable.

Q: 2. Will this fit a canon 24 - 70 2.8 ii?

A: An alternative to the E-82 II cap is the Sensei 82mm Center Pinch Snap-On Lens Cap, BH # SELC82. https://bhpho.to/3DeV6sF

Q: 3. Are the width and height adjustable for this item?

A: The height is easily adjustable since it uses standard light stands. The width can be set to three values. The crossbar consists of 4 segments of 3 foot tubes. You can use 2 for 6 ft wide, 3 for 9 ft wide or all 4 for 12 ft wide..

Q: 4. Do the stands have standard studs so they can be used as light stands or just the pins used for the background support crossbar?

A: Yes, it does has the standard studs and the pins for supporting the crossbar are removable.

Q: 5. Will this lens cap fit Canon 135mm f2? Thank you.

A: I assume you mean Canon EF 135mm f/2L USM Lens if yes Canon E-72 II 72mm Lens Cap will work.

Q: 6. Are these muslins designed for 24' width or 24' in height (to be used as a wall to floor seamless)?

A: The sown in rod hanging looped over part of the fabric is on the 10' side. So, these are designed to hang on the rod with the 10' width. They then fall down 24' and drape onto the ground. You could also use spring clamps (#2 grip clips) to hang the fabric in any orientation you'd like. For example you could clamp the fabric so that it's 24' wide and 10' tall if you like. But it is designed to hang on the included rod and stands in a 10' wide 24' tall orientation... and since the stands only go up so far... there is quite a bit of overflow fabric that you can put on the ground.Hope this helps!

Q: 7. Can this be use on CP 910 ?

A: Yes

Q: 8. Does this background paper works on this support ?a href= http://www.bhphotovideo.com/c/product/45468-REG/Savage_1_12_107_x_12yds_Background.html target= _blank http://www.bhphotovideo.com/c/product/45468-REG/Savage_1_12_107_x_12yds_Background.html/a Thanks

A: Yes it works perfectly fine with me. You will need to buy two clamps to hold paper from rolling

Q: 9. Are these background flame retardant?

A: No, neither the Impact Muslin Background - 10 x 12' (White), B&H # IMBGW1012, nor the Impact Muslin Background - 10 x 12' (Black), B&H # IMBGB1012, included in the Impact Background System Kit are flame retardant, and they should not be used around or near open flames or without proper fire extinguishing equipment nearby.

Q: 10. Does this cap fit the Canon 35-350?

A: Yes, the Canon E-72 II 72mm Lens Cap will fit on the Canon 35-350mm lens.