The brown Canare Starquad XLRM Cable with Neutrik Unisex XLRM/XLRF (Brown, 40') is handcrafted with the super flexible Canare L-4E6S cable and superior Neutrik unisex XLR cable. This cable allows you to switch easily between male and female by sliding housing back and forth. Use Starquad for reduced hum and EMI, and no handling noise. This cable is perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch bays to XLR inputs.

Special cross-linked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

Related Questions and Answers

Q: 1. Is this compatible with: https://www.bhphotovideo.com/c/product/1472263-REG/blind_spot_gear_bsg_1302_007_01_power_junkie_np_f.html?

A: This is not compatible. The Blind Spot Gear Power Junkie is meant to power devices through it's DC barrel port. This would only attach to the USB of the Power Junkie and will not put out enough power to power the camera.

Q: 2. Would this work with a Pentax 6x7 medium format film camera?

A: This would be compatible with a Pentax 6x7.

Q: 3. How long would a 22000 mAh, 2.4 amp output power bank last when connected to a Canon EOS M50 used as a webcam or for streaming?

A: The time of power Canon M5o really depends on the mode it used for. We can't give you exact figure bu we can compare to standard Dea Michael, As we understood your power bank is 22,000 mAh, but usually this just a specification of the battery inside and electronics is eating at least 10-15% of the power bank capacity. So lets assume that it will put out 19,000 mAh. Our up-converting cable is using around 25% of the power to up-convert form 5V of power bank to 8V of LP-E12 dummy battery. So it will be around 18,250 mAh of useful power. The LP-E12 is around 900 mAh, so 18,250 divided by 900 - will be 15-16 times longer than regular LP-E12. This of coarse just rough estimation and will depend on quality and condition of the power bank. Just for your information we also are providing 30,000 mAh and 40,000 mAh power banks. Sincerely, Gyrovu Team.

Q: 4. Is it safe for my camera?

A: This adapter is design to replace Canon LP-E10 battery. We are selling this Item for quite some time, first with DTAP to Dummy Battery , now with USB to Dummy Battery otion. Never had any complains about any problems.

Q: 5. Is this item compatible with a Vixia HF R800?

A: The GyroVu USB to Canon BP-828 Dummy Battery Cable (40") is not compatible with the Vixia HF R800 Camcorder.

Q: 6. will this work with my D7100 and a power bank?

A: Yes the GyroVu USB to Nikon EN-EL15 Dummy Battery Intelligent Cable is compatible with the D7100 and a power bank battery that has a USB-A output.

Q: 7. I have a fujifilm x100s, is this item fits with it...i mean the threaded screw

A: Yes, the Bower Pro 900 Vinyl Cable Release with Center Lock will work with the Fujifilm X100s.

Q: 8. If you are hooking up zoom and focus would you need two cords?

A: The Blackmagic Design Zoom Demand and Blackmagic Design Focus Demand would daisy chain to connect to the camera, so two of the Blackmagic Design USB-C Cable for Focus or Zoom Control (40") would be necessary to connect.

Q: 9. Will the GyroVu USB to Panasonic DMW-BLC12 Dummy Battery Cable work with the Sigma Fp?

A: Yes, the GyroVu USB to Panasonic DMW-BLC12 Dummy Battery Cable for GH2 (40") is correct for the Sigma fp.

Q: 10. will this power up my sony ax53 camcorder?

A: Yes. The GyroVu USB to Sony NP-FV50 Dummy Battery Cable (40") will work for the Sony FDR AX53.