This 4 x 5.65" Tiffen Combination Soft FX 1 / IRND Filter is an all-in-one filter combining the benefits of multiple filters. Tiffen has combined innovative IRND technology with the Soft/FX filters that retain overall image clarity while softening unwanted details. This filter combines IRND to allow selective aperture and IR control with the pleasing softness of Soft/FX to deliver a great overall effect.

Tiffen's ColorCore technology provides filmmakers with the necessary tools to create the world's greatest images.

0.3 Optical Density    ColorCore Technology

3 filters in one, reducing multiple surfaces and potential reflection from stacked filters

Tiny lenslets put fine image elements out of focus while leaving large details sharp

Lighter densities are very subtle, producing almost no flare

Higher densities are more noticeable but still provide a pleasing portrait

Eliminates the potential "too sharp" look of modern cameras and lenses

For digital cameras with CMOS & CCD sensors with heightened response to the Red channel

Absorbs pollution of the Far Red (visible) and Near Infrared wavelengths

IR absorbing component is proportionate to the ND value

Ideal for lightweight or clip-on matte boxes

Made from water white glass

IRND+SFX will not ripple or distort when panning

Related Questions and Answers

Q: 1. Does the Eye's tally light function with the Blackmagic's ATEM embedded SDI information (turns on when switcher is live to that camera)?

A: Can't confirm. I've been using the Eye with my FS7 only.

Q: 2. This works with the autofocus motor for AF-D lenses?

A: The Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter does not support autofocus with Nikon AF-D lenses.

Q: 3. Can the Eye be powered from the Ursa Mini Pro's 4-pin XLR side output (the same one that powers their own viewfinders?)

A: Yes, and here is the cable: Nebtek 4-Pin XLR Male to 2-Pin LEMO Bolt Power Cable (6') B&H # NEBOLTL2XLR4. There is also the option of powering from a d-tap if you wish to use the Eye on another camera that does not have a 4 pin XLR power connection. Zacuto Power & Video Cable (30 ) B&H # ZAZEPVC.

Q: 4. Can I power the Gratical Eye with my c300 camera only? I don't necessarily want to use external power (ex: anton bauer).

A: The Gratical Eye can ONLY be powered from an 12-16.8 volt external source thru the Lemo 2 pin power input . I don't own a C300 but looking at the specs I do not see a power out on that camera. So a Anton Bauer or similar external battery is must to use this EVF.

Q: 5. will this product fit a 10 x 50 6.5 degree Nikon Action Lookout IV ?

A: This model will not. My apologies. It is dedicated for 42mm models.

Q: 6. Will this work for Dslr lenses?

A: This is a Wide Attachment Lens meant to go on to a camcorder with a lens built in already. It is not designed to work with DSLR cameras or the lenses they use and we do not recommend it.

Q: 7. Does it support IBIS for XT5?

A: Yes, the Fringer NF-FX II supports the Fuji XT5's IBIS.

Q: 8. Would this works nicely with a XH2s ? IBIS support and Phase AF ?

A: Yes, the Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter will work with the FUJIFILM X-H2S Mirrorless Camera (B&H # FUXH2S), because of the high performance stacked sensor.

Q: 9. Does the Zacuto Gratical Eye Micro OLED EVF come with a power cable and 3G-SDI Cable? If not, what would you recommend For Sony FS7?

A: It does not. The one pictured is here. a href= http://store.zacuto.com/power-video-cable/. target= _blank http://store.zacuto.com/power-video-cable/./a You can have us order it by calling or emailing us. 800.606.6969 or 212.444.6615 E-Mail:sales@a href= http://bhphotovideo.com. target= _blank bhphotovideo.com./a You can use a flexible HD-SDI BNC connector cable like this. (The picture is a stock photo. The cable itself should be very thin.) Canare HD-SDI Flexible Coaxial Cable with BNC Connectors (2' / 0.61 m) B&H # CAL45CHWS2. However, it does not have right angle connectors which we think is a better idea. Here is a 24 power cable for use with a D-Tap battery. Redrock Micro D-Tap to 2-Pin LEMO flexCable for microRemote (24 ) B&H # RE21000055

Q: 10. I noticed a red shift with ours. If you angle off axis it goes away. Not quite how I want to use it. Anyone witness this?

A: This would be a service issue. If you have had this less than 30 days, please contact B&H Customer Service to see about arranging an exchange or return. B&H Customer Service Contact: https://bhpho.to/2caRE5L. If you have had this longer than 30 days, please contact Zacuto. a href= http://www.zacuto.com/contact-zacuto target= _blank www.zacuto.com/contact-zacuto./a