The 3x50 Avenger Gen I Night Vision Weapon Sight from Bering Optics is a close to mid-range optic for recreational shooting use in low light or complete darkness. This NVD is equipped with a Gen 1 intensifier tube that produces 35 lp/mm resolution and features automatic cut-off circuitry that protects the tube and operator's eye by deactivating the NVD upon detecting excessive light levels. A red-illuminated floating Mil Dot reticle offers enhanced contrast against the green night vision image and assists the shooter with range and holdover estimation.

This configuration of the Avenger weapon-mounted optic has 3x magnification and f/1.5 light gathering ability, enabling adequate light transmission for effective targeting under moonlight. For indoor use or when operating under heavy cloud cover, the Avenger's built-in 25mW infrared illuminator is capable of lighting a subject up to 55 yd away. This NVD also has a manual focus objective capable of focusing to within 35 ft and an accessory side rail that supports an additional tactical accessory, such as a long-range IR illuminator or laser aiming device. An IPX4-compliant, water-sealed housing makes the Avenger NVD ready to perform in light rain, high humidity, and even freezing temperatures.

Gen 1 Image Intensifier    35 lp/mm Typical Resolution    Automatic High-Light Cut-Off    Built-In 25mW 805nm IR Illuminator    1/8 MOA Impact Point Correction    80mm f/1.5 Lens System, Manual Focus    IPX4 Water-Resistant Housing    Picatinny / Weaver Rail Mount    Accessory Picatinny / Weaver Side Rail    Illuminated Red-on-Green Mil Dot Reticle

• Gen 1 intensifier tube
• 35lp/mm typical resolution
• Automatic high-light cut-off

• 3x magnification, 50mm objective
• 80mm f/1.5 lens system
• 12° angle of view
• 50mm eye relief
• Illuminated red-on-green floating Mil Dot reticle

• 25mW 805nm infrared illuminator
• 1/8 MOA windage and elevation adjustments
• 72 MOA windage and elevation adjustment range
• Picatinny / Weaver accessory side rail
• In-view low-battery indicator
• Adjustable reticle brightness

• IPX4 water-resistant housing
• Rated to operate in 94% humidity
• -22 to 122° operating temperature
• Shock-resistant construction
• Vertically positioned battery housing
• 33.5 oz weight

Related Questions and Answers

Q: 1. Why you bought this pin and not the Avenger E250?

A: The Avenger E250 Long Double 5/8" Baby Pin is 6.0" long designed and made to fit into super clamp or any other locking 5/8" receptor.

Q: 2. Is the case totally TSA compliant?

A: Before any trip it is best to check with the TSA https://www.tsa.gov/ and your air carrier for current regulations and allowances.

Q: 3. Will this fit D750 with 24-120 Lens attached within padded insert?

A: Yes the Nikon D750 with an attached AF-S 24-120mm lens will fit into this case.

Q: 4. Can I use 1 Profoto B1x with Octa Rfi 5" ?

A: The BH #AVD600 is capable of hold a B1x and a RFI 5' softbox, but only if on a stand that is capable of supporting the payload, boom and counterweight.

Q: 5. Why this one costs more than Avenger E250 ? Different metal?

A: The Avenger E250 Long Double 5/8" Baby Pin is designed for use inside a super clamp or any other locking 5/8" receptor. Meanwhile, the Avenger E650 6.0" Pin with Collar is designed for use with a grip head. The collar at the end of the pin acts as an anchor to prevent the pin from sliding completely through a grip clamp.

Q: 6. What are the exterior dimensions?

A: Exterior Length:21.26 in Exterior Width:16.75 in Exterior Depth 9.83 in Exterior Cu. Volume: 2.03 cu ft

Q: 7. Can you take the rubber knob grip off the handle if you don't want it on?

A: It'll take great effort but yes you can

Q: 8. Will this case work and fit as an airline carry on. Thnx.

A: Each air lines have their own size specifications so it is a good idea to contact the specific airlines for that.This is around the size the bag can be at the largest, The maximum dimensions cannot exceed any of the following measurements: 22 long x 14 wide x 9 tall or 115cm (56 x 36 x 23 cm). The case you are referring to is, 19.00 x 14.38 x 8.00 (48.26 x 36.53 x 20.32 cm). So it is just a bit too wide.

Q: 9. What is the max weight that this can hold?

A: The max weight that the Avenger C1100 Sparrow Plate can hold really depends on where it is mounted. An example of a light it can hold is an Arri 300W Plus Tungsten Fresnel which weighs about 4 lbs.

Q: 10. Just wanted to ask if this will work on the Avenger A2018F C-Stand, and if so does it require any type of attachment?

A: Yes, this boom arm will work with all standard c-stands (including the A2018F C-Stand) without the need for any kind of adaptor.